ASK*--PLEASE CONTACT US
| MANUFACTURER |
MODEL |
PRICE |
DESCRIPTION |
QUANTITY |
| | | | WR28 WAVEGUIDE: 26.5-40.0 GHz | |
| AEROWAVE | 28-1204 | $50.00 | WR28 Straight Section, 4 inches length | 1 |
| AEROWAVE | 28-1890 | $50.00 | WR28 90 degree E-Plane Bend | 3 |
| AEROWAVE | 28-2311 | $165.00 | WR28 Variable Phase Shifter, 0-180 degrees, uncalibrated drive | 1 |
| AEROWAVE | 28-2750S | $195.00 | WR28 Sliding Short, micrometer drive | 3 |
| AEROWAVE | 28-3000/10 | $235.00 | WR28 Directional Coupler, 10 dB coupling, directivity >20 dB | 1 |
| AEROWAVE | 28-3220/10/10 | $500.00 | WR28 Dual Directional Coupler, 10 dB coupling, directivity>20 dB | 1 |
| AILTECH | 8096 | $235.00 | WR28 Argon Gas Noise Source, 16.25 dB ENR, 26.5-38 GHz | 2 |
| AIRTRON | 129738 | $50.00 | WR28 Unjacketed Flexible Waveguide Section, 4 inches length | 1 |
| ALLIANT TECHSYSTEMS | 48127 | $165.00 | WR28 Pickup Horn, 15 dBi gain mid-band | 1 |
| ARRA | 28-400B | $45.00 | WR28 90 degree E-Plane Bend | 2 |
| ATM | 28-600-20-6-6 | $90.00 | WR28 20 dB Fixed Attenuator | 4 |
| AVANTEK | SMW88-6877 | $500.00 | WR28 Active Doubler, +10 dBm in, 25-36.66 GHz +10 dBm out, 15V | 1 |
| BAYTRON | 3-28-300/10 | $235.00 | WR28 Directional Coupler, 10 dB coupling, directivity >20 dB | 2 |
| BAYTRON | 3A-80H/90 | $50.00 | WR28 90 degree H-Plane Bend | 1 |
| BAYTRON | 3Ka-30/10 | $275.00 | WR28 Directional Coupler, 10 dB coupling, directivity 30 dB | 1 |
| BAYTRON | 3Ka-38H/40 | $350.00 | WR28 Sidewall Dir.Coupler,40 dB nominal coupling(actual 36-43dB) | 1 |
| BAYTRON | 3Ka-65 | $50.00 | WR28 Pressurization Section, 2-1/2 in length, 0-30 PSI guage | 1 |
| BAYTRON | 3Ka-70/90-LH | $50.00 | WR28 90 degree Left Hand Twist Section, 2 inches, choke flanges | 1 |
| BAYTRON | 3Ka-80/30 | $50.00 | WR28 30 degree H-Plane Bend | 1 |
| CMT | 58P33762Y | $175.00 | WR28 Straight Section, 6 ft. length, aluminum, cover/choke fl's | 9 |
| CMT | 58P33764 | $85.00 | WR28 Straight Section, 12 inches length, choke flanges, aluminum | 1 |
| CMT | 58P37980W | $145.00 | WR28 Straight Section, 40 inches length, cover/choke fl's, alum. | 1 |
| CMT | 58-P37982 | $50.00 | WR28 90 degree H-Plane Bend, 3 inch leg length, cover/choke fl's | 5 |
| CMT | AR28-20-1A4AA | $100.00 | WR28 20 dB Fixed Attenuator, 1 Watt maximum | 2 |
| CMT | AR28-3-1B1BC | $100.00 | WR28 3 dB Fixed Attenuator, 1 Watt maximum | 1 |
| CMT | LPT28 | $110.00 | WR28 Low Power Termination, 2 Watts maximum, 1.05 VSWR | 1 |
| CMT | RA28-K-F-1A-A | $235.00 | WR28 x 2.92mm(f) Adapter | 3 |
| CMT | RA28-K-M-1A-A | $235.00 | WR28 x 2.92mm(m) Adapter | 3 |
| CMT | RBC28-03 | $325.00 | WR28 Directional Coupler, 3 dB coupling | 1 |
| CMT | RBC28-10 | $325.00 | WR28 Directional Coupler, 10 dB coupling | 2 |
| CMT | RCC28-2-20 | $195.00 | WR28 3-Port Crossguide Coupler, 20 dB coupling | 2 |
| CMT | REB28-1A1A | $50.00 | WR28 90 degree E-Plane Bend | 1 |
| CMT | RHB28-0.86 | $50.00 | WR28 90 degree H-Plane Bend, 0.86 inch legs | 1 |
| CMT | RS28-1A-5A-1 | $35.00 | WR28 Straight Section, 1 inch length, aluminum | 1 |
| CMT | RS28-4.75 | $50.00 | WR28 Straight Section, 4-3/4 inches length | 1 |
| CMT | RS28-5.00 | $50.00 | WR28 Straight Section, 5 inches length | 2 |
| CUSTOM MICROWAVE | 45-TW28S | $60.00 | WR28 45 degree Twist Section, 2 in. length | 2 |
| DEMORNAY BONARDI | DBD-224 | $50.00 | WR28 90 degree E-Plane Bend | 4 |
| DEMORNAY BONARDI | DBD-234 | $50.00 | WR28 90 degree H-Plane Bend | 1 |
| DEMORNAY BONARDI | DBD-313-1 | $175.00 | WR28 Tunable Detector (1N53), neg. polarity, micrometer drive | ASK* |
| DEMORNAY BONARDI | DBD-460 | $265.00 | WR28 High Power Termination, 50 watts average/ 50 kW peak | 5 |
| DEMORNAY BONARDI | DBD-825/DB-820 | $450.00 | WR28 Slotted Line, with carriage and detector | ASK* |
| DEMORNAY BONARDI | DBD-915 | $235.00 | WR28 Variable Phase Shifter, 0-180 degrees, 0-100 dial scale | 2 |
| DEMORNAY BONARDI | DBD-919-1 | $225.00 | WR28 Slide Screw Tuner, micrometer read | ASK* |
| DEMORNAY BONARDI | DBD-969-1 | $195.00 | WR28 Sliding Short, micrometer read | ASK* |
| DEMORNAY BONARDI | DBD-S-674 | $150.00 | WR28 4-Port Unterminated Broadwall Coupler, 10 dB coupling | 1 |
| DEMORNAY BONARDI | DBGE-018 | $145.00 | WR28 x WR90 Taper Section, 6.5 inches length | 1 |
| DIGITAL MICROWAVE | 017-453254 | $65.00 | WR28 Unjacketed Flexible Waveguide, 8.9 inches length | 1 |
| DORADO INTL. | 4IWN-39.2 | $75.00 | WR28 Isolator, 20 dB, 36-40 GHz | 4 |
| DORADO INTL. | BE-28 | $45.00 | WR28 90 degree E-Plane Bend | 9 |
| DORADO INTL. | FA28-30 | $90.00 | WR28 30 dB Fixed Attenuator | 1 |
| DORADO INTL. | VPS-28 | $145.00 | WR28 Variable Phase Shifter, 0-180 degrees, micrometer drive | 1 |
| DORADO INTL. | WR28 HYBRID TEE | $65.00 | WR28 Hybrid Tee, fourth (isolated) port is SMA female | 2 |
| DOUGLAS MICROWAVE | 130T | $50.00 | WR28 90 degree E-Plane Bend | 1 |
| EIP | 2030022 | $295.00 | WR28 Remote Sensor for EIP Frequency Counter, 26.5-40 GHz | 1 |
| FERROCOM | 031-339888 | $60.00 | WR28 Circulator, 20 dB isolation, 36.8-40 GHz | 7 |
| FLANN MICROWAVE | 22040 | $150.00 | WR28 Low Power Termination, 1/2 Watt maximum, 1.02 VSWR | 1 |
| FLANN MICROWAVE | 22063 | $1,200.00 | WR28 Direct Reading Phase Shifter, 0-360 degrees | 1 |
| FLANN MICROWAVE | 22093-TF30 | $295.00 | WR28 x 2.4mm(f) Adapter | 1 |
| FLANN MICROWAVE | 22110 | $1,250.00 | WR28 Precision Direct Reading Attenuator, 0-60 dB | 2 |
| FLANN MICROWAVE | 22131-10 | $450.00 | WR28 Directional Coupler, 10 dB coupling | 1 |
| FLANN MICROWAVE | 22131-20 | $450.00 | WR28 Directional Coupler, 20 dB coupling | 1 |
| FLANN MICROWAVE | 22333-3 | $475.00 | WR28 Manual 4-Position 4-Port Switch, E-Plane | 1 |
| FLANN MICROWAVE | 2242 | $90.00 | WR28 E-Plane (Series) Tee, 2-1/4 inch length | 1 |
| FLANN MICROWAVE | 22441-01.5 | $40.00 | WR28 Straight Section, 1-1/2 inches length | 1 |
| FLANN MICROWAVE | 22441-12 | $90.00 | WR28 Straight Section, 12 inches length | 1 |
| FLANN MICROWAVE | 22450 | $65.00 | WR28 90 degree Twist Section, 2.1 inches length | 1 |
| FXR/MICROLAB | U164A | $500.00 | WR28 Precision Direct Reading Attenuator, 0-50 dB | 3 |
| FXR/MICROLAB | U312BF | $350.00 | WR28 E-H Plane Tuner, micrometer read | 3 |
| FXR/MICROLAB | U410A | $235.00 | WR28 Direct Reading Frequency Meter, 0.08% accuracy | 1 |
| FXR/MICROLAB | U501AF | $110.00 | WR28 Low Power Termination, 1/2 Watt maximum, 1.05 VSWR | 6 |
| FXR/MICROLAB | U510D | $175.00 | WR28 Standard Mismatch, VSWR 1.20, 300 mW maximum | 2 |
| FXR/MICROLAB | U610A | $185.00 | WR28 Standard Mismatch, VSWR=1.00 | ASK* |
| FXR/MICROLAB | U610B | $185.00 | WR28 Standard Mismatch, VSWR=1.05 | ASK* |
| FXR/MICROLAB | U622AF | $150.00 | WR28 Hybrid Tee | 2 |
| FXR/MICROLAB | U623BF | $50.00 | WR28 90 degree E-Plane Bend | 1 |
| FXR/MICROLAB | U624BF | $50.00 | WR28 90 degree H-Plane Bend | 1 |
| FXR/MICROLAB | U630CF | $195.00 | WR28 Adjustable Short, micrometer drive | 2 |
| FXR/MICROLAB | U641A | $350.00 | WR28 DPDT Transfer Switch, manually operated | 1 |
| FXR/MICROLAB | U641AF | $375.00 | WR28 DPDT Transfer Switch, manually operated, H-Plane | 2 |
| GENERIC | WR28 2" | $40.00 | WR28 Straight Section, 2 inches length, gold flash/ brass | 1 |
| GENERIC | WR28 4.5" | $20.00 | WR28 Straight Section, 4-1/2 inches length, aluminum, choke fl's | 2 |
| GENERIC | WR28 4.5" straight | $35.00 | WR28 Straight Section, 4.5 inches length, aluminum,choke flanges | 13 |
| GENERIC | WR28 4.5" straight | $35.00 | WR28 Straight Section, 4.5 inches length, aluminum | 5 |
| GENERIC | WR28 6" straight | $45.00 | WR28 Straight Section, 6 inches length, aluminum, choke flanges | 4 |
| GENERIC | WR28 bulkhead | $35.00 | WR28 Bulkhead, 1.5 in. square x 0.6 in. thick, 4 hole mount | 6 |
| GENERIC | WR28 E 90 mitre | $20.00 | WR28 90 degree E-Plane Mitre Bend, 2-1/2 inch legs, aluminum | 22 |
| GENERIC | WR28 H 90 mitre | $25.00 | WR28 90 degree H-Plane Mitre Bend, 2-1/2 inch legs, aluminum | 9 |
| GENERIC | WR28 x SSMAf | $100.00 | WR28 x SSMA(f) Adapter | 1 |
| HITACHI | R3601 | $350.00 | WR28 3-Position 3-Port Manual Switch, H-Plane | 1 |
| HITACHI | R4610 | $1,100.00 | WR28 Direct Reading Phase Shifter, 0-360 degrees | 1 |
| HONEYWELL | A2300N | $300.00 | WR28 Frequency Tripler, 8.83-13.33 GHz +19 dBm drive, 0 dBm out | 1 |
| HONEYWELL | DKa-1 | $295.00 | WR28 Freq. Doubker, +16 dBm input, output >+4 dBm | 1 |
| HONEYWELL | DKa-2 (SB) | $325.00 | WR28 Freq. Doubler, +20 dBm input, output >+7 dBm | 1 |
| HONEYWELL | FKa-U | $350.00 | WR28 Mixer,RF/LO=26.5-40 GHz,LO=+3 dBm,amplified IF=1-1000MHz | 1 |
| HP/AGILENT | 11517A/19A/20A | $500.00 | Waveguide Mixer Set, 18.0-40.0 GHz coverage, for HP 8555A, 8565A | 2 |
| HP/AGILENT | 11664D | $650.00 | WR28 Detector, for HP scalar network analyzers | 1 |
| HP/AGILENT | 11970A | $595.00 | WR28 Harmonic Mixer, 26.5-40 GHz, for use with Agilent analyzers | 14 |
| HP/AGILENT | 11971A | $595.00 | WR28 Harmonic Mixer, 26.5-40 GHz, for use with HP 8569B | 1 |
| HP/AGILENT | 11974A | $4,950.00 | WR28 Preselected Mixer, 26.5-40 GHz, for HP spectrum analyzers | 2 |
| HP/AGILENT | 83554A | $2,950.00 | WR28 Source Module, +8 dBm levelled, for HP sources | 3 |
| HP/AGILENT | 83572-60071 | $500.00 | WR28 Directional Coupler, 10 dB coupling (same as R752C) | 1 |
| HP/AGILENT | R11644A | $2,400.00 | WR28 Calibration Kit, for Agilent network analyzers | 1 |
| HP/AGILENT | R11645A | $2,900.00 | WR28 Verification Kit, for HP 8510/8720 series network analyzers | 1 |
| HP/AGILENT | R281A | $650.00 | WR28 x 2.4mm(f) Adapter | 34 |
| HP/AGILENT | R281B | $650.00 | WR28 x 2.4mm(m) Adapter | 8 |
| HP/AGILENT | R347B | $1,200.00 | WR28 Noise Source, 12 dB ENR, 26.5-40 GHz | 1 |
| HP/AGILENT | R362A | $300.00 | WR28 Low Pass Filter, 47 GHz (-30 dB) cutoff | 6 |
| HP/AGILENT | R365A | $600.00 | WR28 Full Band Isolator, 25 dB isolation, 1.5 dB insertion loss | 13 |
| HP/AGILENT | R382A | $1,650.00 | WR28 Precision Direct Reading Attenuator, 0-50 dB, 26.5-40 GHz | 19 |
| HP/AGILENT | R422A | $375.00 | WR28 Broadband Crystal Detector, negative polarity | 11 |
| HP/AGILENT | R422A-001 | $750.00 | Matched Pair of R422A negative polarity detectors | 1 |
| HP/AGILENT | R422A-002 | $400.00 | WR28 Broadband Crystal Detector, negative, matched load | 1 |
| HP/AGILENT | R486A | $595.00 | WR28 Thermistor Mount, for HP 432 series power meters | 11 |
| HP/AGILENT | R532A | $500.00 | WR28 Direct Reading Frequency Meter, 0.11% accuracy | 6 |
| HP/AGILENT | R752A | $500.00 | WR28 Directional Coupler, 3 dB coupling | 9 |
| HP/AGILENT | R752C | $500.00 | WR28 Directional Coupler, 10 dB coupling | 8 |
| HP/AGILENT | R752CS | $500.00 | WR28 Directional Coupler, 10 dB coupling, split block design | 4 |
| HP/AGILENT | R752D | $500.00 | WR28 Directional Coupler, 20 dB coupling | 8 |
| HP/AGILENT | R752DS | $500.00 | WR28 Directional Coupler, 20 dB coupling, split block design | 1 |
| HP/AGILENT | R815B/814A/446B | $450.00 | WR28 Slotted Line, with carriage and detector | 2 |
| HP/AGILENT | R8486A | $995.00 | WR28 Power Sensor, -30 to +20 dBm, 26.5-40 GHz | 10 |
| HP/AGILENT | R8486D | $1,295.00 | WR28 Power Sensor, -70 to -20 dBm, 26.5-40 GHz | 8 |
| HP/AGILENT | R85026A | $995.00 | WR28 Detector, for HP 8757 series scalar network analyzer | 4 |
| HP/AGILENT | R870A | $300.00 | WR28 Slide Screw Tuner, dual micrometer drives | 2 |
| HP/AGILENT | R896D | $140.00 | WR28 Standard Section, 4 inches length | 2 |
| HP/AGILENT | R898A | $85.00 | WR28 90 degree Twist Section, 2-1/4 inches length | 1 |
| HP/AGILENT | R899B | $65.00 | WR28 Straight Section, 2 inches length | 1 |
| HP/AGILENT | R910A | $200.00 | WR28 Low Power Termination, 1 Watt maximum, 1.025 VSWR | 1 |
| HP/AGILENT | R914B | $275.00 | WR28 Moving Load, 500 mW, 1.01 VSWR, uncalibrated drive | 4 |
| HP/AGILENT | R914C | $395.00 | WR28 Moving Load, 500 mW, 1.01 VSWR, micrometer drive | 2 |
| HP/AGILENT | R920B | $250.00 | WR28 Adjustable Short, micrometer drive | 4 |
| HP/AGILENT | R920C | $300.00 | WR28 Adjustable Short, lockable micrometer drive | 2 |
| HUGHES | 44820H | $225.00 | WR28 Crystal Detector, 26.5-40 GHz, negative polarity | ASK* |
| HUGHES | 45111H-2000 | $400.00 | WR28 Full Band Isolator, 25 dB isolation, 1.5 dB insertion loss | 7 |
| HUGHES | 45141H-2000 | $125.00 | WR28 Junction Isolator, 20 dB isolation, 35-37 GHz | 2 |
| HUGHES | 45161H-2000 | $125.00 | WR28 Circulator, 20 dB isolation, 28.5-31.5 GHz | 1 |
| HUGHES | 45321H-2110 | $350.00 | WR28 Directional Coupler, 10 dB coupling | 1 |
| HUGHES | 45321H-2206 | $250.00 | WR28 Directional Coupler, 6 dB coupling; split block type | 2 |
| HUGHES | 45321H-2210 | $250.00 | WR28 Directional Coupler, 10 dB coupling; split block type | 2 |
| HUGHES | 45321H-2220 | $250.00 | WR28 Directional Coupler, 20 dB coupling; split block type | 2 |
| HUGHES | 45321H-2310 | $375.00 | WR28 Directional Coupler, 10 dB coupling; split block type | 1 |
| HUGHES | 45391H-2200 | $395.00 | WR28 Matched Hybrid Tee, 26.5-38 GHz, 0.5 dB balance | 1 |
| HUGHES | 45411H-2090 | $60.00 | WR28 90 degree Twist Section, 1.75 inches length | 9 |
| HUGHES | 45421H-2190 | $60.00 | WR28 90 degree E-Plane Bend | 15 |
| HUGHES | 45421H-2290 | $60.00 | WR28 90 degree H-Plane Bend | 5 |
| HUGHES | 45431H-2008 | $85.00 | WR28 Straight Section, 8 inches length | 4 |
| HUGHES | 45431H-2010 | $85.00 | WR28 Straight Section, 10 inches length | 1 |
| HUGHES | 45611H-2000 | $125.00 | WR28 Low Power Termination, 1 Watt maximum, 1.03 VSWR | 1 |
| HUGHES | 45671H-2200 | $235.00 | WR28 Adjustable Short, micrometer read | 1 |
| HUGHES | 45711H-2000 | $500.00 | WR28 Direct Reading Frequency Meter, 26.5-40 GHz | 4 |
| HUGHES | 45751H-2000 | $1,000.00 | WR28 Precision Direct Reading Phase Shifter, 0-360 degrees | 3 |
| HUGHES | 45771H-2100 | $350.00 | WR28 Thermistor Mount, -20 to +10 dBm, for use with HP 432 | 1 |
| HUGHES | 47341H-2100 | $395.00 | WR28 Tunable Single Ended Harmonic Mixer, 26.5-40 GHz | 1 |
| HUGHES | 47431H-2003 | $395.00 | WR28 Tunable Harmonic Mixer, RF=26.5-40G, LO=8-15G, IF=10-1000M | 1 |
| HUGHES | 47441H-2010 | $395.00 | WR28 Broadband Harmonic Mixer, LO=2-4 GHz, IF=5-500 MHz w/amp. | 1 |
| HUGHES | 47741H-2310 | $1,250.00 | WR28 Phase-Locked Gunn Osc., 31.84-32.24 GHz, +19 dBm Po | 1 |
| HUGHES | 47971H-2200C | $250.00 | WR28 PIN Modulator, >15 dB on/off ratio, 26.5-40 GHz | 1 |
| LORCH | 5WR28-29175/150 | $85.00 | WR28 Band Pass Filter, 29.10-29.25 GHz, 3 inches length | 11 |
| LORCH | 6WR28-31G/R60C | $85.00 | WR28 Bandpass Filter, 30.9-31.1 GHz, 3-1/16" length | 15 |
| LORCH | 7WG-39475/R350 | $85.00 | WR28 Band Pass Filter, 39.30-39.65 GHz, 2-1/8 inches length | 1 |
| LORCH | 7WR28-28225/250 | $85.00 | WR28 Band Pass Filter, 28.10-28.35 GHz, 3 inches length | 21 |
| M.C.S. | R-136 | $50.00 | WR28 90 degree H-Plane Bend | 1 |
| M/A-COM | 3-28-400/10 | $325.00 | WR28 Directional Coupler, 10 dB coupling | 1 |
| M/A-COM | 4-28-720-02 | $295.00 | WR28 Broadband Detector, negative polarity | 6 |
| M/A-COM | 8500-6259-00 | $235.00 | WR28 x 2.4mm(f) Adapter | 1 |
| MARCONI | 6052/1 | $750.00 | WR28 Precision Direct Reading Attenuator, 0-60 dB | 1 |
| MAURY MICROWAVE | U207A6 | $185.00 | WR28 x SSMA(f) Adapter, 1.15 VSWR maximum | 1 |
| MAURY MICROWAVE | U314 | $235.00 | WR28 Sliding Termination, uncalibrated drive, 1.013 VSWR, 500 mW | 1 |
| MAURY MICROWAVE | U320D | $235.00 | WR28 Standard Mismatch, 1.20 VSWR | 2 |
| MAURY MICROWAVE | U347 | $195.00 | WR28 Sliding Short, micrometer drive | 3 |
| MAURY MICROWAVE | U351 | $295.00 | WR28 5-Probe Tuner, matches 1.10 VSWR to <1.01, vernier drives | 3 |
| MAURY MICROWAVE | US322B0.160 | $85.00 | WR28 Two-Port Quarter Wave Standard | 1 |
| MDL | 28AC206 | $200.00 | WR28 x 2.92mm(f) Adapter | 8 |
| MDL | 28BE18-30P-3D | $50.00 | WR28 90 degree E-plane Bend, choke flanges | 1 |
| MDL | 58028-449A | $50.00 | WR28 Isolator, 20 dB isolation, 28.0-29.5 GHz | 3 |
| MDL | 58028-449B | $50.00 | WR28 Isolator, 20 dB isolation, 26.5-29.5 GHz | 1 |
| MDL | 58028-568 | $50.00 | WR28 Circulator, 20 dB isolation, 26.5-29.5 GHz | 2 |
| MDL | 58028-570 | $50.00 | WR28 Circulator, 20 dB isolation, 30.5-32.5 GHz | 1 |
| MDT | MFMKu2A | $350.00 | WR28 Doubler, 15.5-15.8 GHz +27 dBm in, 31-31.6 GHz +20 dBm out | 1 |
| MDT | MFMX2KT-28-8 | $150.00 | WR28 Freq. Doubler, 13-14 GHz +20 dBm in, 26-28 GHz +2 dBm out | 2 |
| MICRORECH | 23972-3 | $65.00 | WR28 Unjacketed Flexible Waveguide Section, 3 inches length*NEW* | 5 |
| MICROTECH | 239792-4 | $65.00 | WR28 Unjacketed Flexible Waveguide Section, 4 inches length | 1 |
| MICROTECH | 3400002-0001 | $65.00 | WR28 Unjacketed Flexible Waveguide Section, 5 in. length *NEW* | 28 |
| MICROWAVE ASSOC. | 8K689 | $150.00 | WR28 High Power Circulator,20 dB isol,33.4-34.2 GHz,cooling tube | 1 |
| MICROWAVE ASSOC. | MA-1023A | $90.00 | WR28 Level Set Attenuator, 0-20 dB, uncalibrated drive | 2 |
| MICROWAVE ASSOC. | MA-539C | $150.00 | WR28 Tunable Detector Mount, pos.polarity, micrometer read drive | ASK* |
| MICROWAVE ASSOC. | MA-572 | $295.00 | WR28 Standard Gain Horn, 25 dBi gain mid-band, UG600/U choke fl. | 1 |
| MICROWAVE ASSOC. | MA-572 | $295.00 | WR28 (choke flange) Standard Gain Horn, 25 dBi gain mid-band | 1 |
| MICROWAVE RESEARCH | A160-6 | $235.00 | WR28 Directional Coupler, 6 dB coupling | 1 |
| MID-CENTURY MW. | 11771 | $135.00 | WR28 Matched Hybrid Tee, 32-35 GHz | 1 |
| MILLIMETER PRODUCTS | 115A/599 | $400.00 | WR28 Full Band Isolator, 25 dB isolation, 1.5 dB insertion loss | 2 |
| MILLIMETER PRODUCTS | 410A-599KF | $250.00 | WR28 x 2.92mm(f) Adapter | 1 |
| MILLIMETER PRODUCTS | 510A/599 | $850.00 | WR28 Precision Direct Reading Attenuator, 0-60 dB | 1 |
| MILLIMETER PRODUCTS | 511A/599 | $1,500.00 | WR28 Digital Readout Programmable Atten., 0-60 dB, GPIB | 2 |
| MILLIMETER PRODUCTS | 580A/599 | $110.00 | WR28 Termination, 1 Watt max., 1.05 VSWR, cover flange | 3 |
| MILLIMETER PRODUCTS | 580A/600 | $110.00 | WR28 Termination, 1 Watt max., 1.05 VSWR, choke flange | 2 |
| MILLIMETER PRODUCTS | 690A-5.50/599 | $60.00 | WR28 Straight Section, 5.5 inches length | 1 |
| MILLITECH | 45141H-2000 | $125.00 | WR28 Junction Isolator, 20 dB isolation, 33.0-36.5 GHz | 1 |
| MILLITECH | 45391H-2300 | $195.00 | WR28 Matched Hybrid Tee, 30.5-36 GHz, 0.5 dB balance | 1 |
| MILLITECH | 45521H-2000 | $475.00 | WR28 Manual 4-Position 4-Port Switch, H-Plane | 4 |
| MILLITECH | CGP-28-S03SO | $295.00 | WR28 Directional Coupler, 3 dB coupling,split block construction | 1 |
| MILLITECH | CL3-28-S1000 | $350.00 | WR28 Directional Coupler, 10 dB coupling, split block | 1 |
| MILLITECH | CMT-28-S60SO | $295.00 | WR28 Matched Hybrid Tee, 31-39 GHz | 1 |
| MILLITECH | DRF-28-S0000 | $500.00 | WR28 Direct Reading Frequency Meter, 26.5-40 GHz | 1 |
| MILLITECH | JFD-28-WI | $75.00 | WR28 Isolator, 20 dB, 33.5-37.0 GHz | 2 |
| MILLITECH | LSA-28-S0000 | $300.00 | WR28 Variable Attenuator, 0-25 dB, micrometer drive | 1 |
| MILLITECH | MWS-28-1RGAW | $950.00 | WR28 Motorized 3-Position 4-Port Switch & manual/GPIB controller | 1 |
| MILLITECH | MXP-28-A010LS | $395.00 | WR28 Balanced Mixer, RF/LO=26.5-40 GHz, LO=+13 dBm, IF=DC-13GHz | 1 |
| MILLITECH | MXP-28-RFSFL | $395.00 | WR28 Balanced Mixer, RF/LO=26.5-40 GHz, LO=+13 dBm, IF=DC-13 GHz | 11 |
| MILLITECH | VPS-28-S000 | $350.00 | WR28 Variable Phase Shifter, 0-180 degrees, micrometer drive | 1 |
| MILLITECH | WTR-28-S0000 | $110.00 | WR28 Low Power Termination, 1 Watt maximum, 1.05 VSWR | 8 |
| MILLIWAVE | S92-2358-1 | $175.00 | WR28 Freq. Tripler, 33-39 GHz >+10 dBm Po, 12V 30mA & 5.7V 150mA | 1 |
| MW. DEVELOPMENT CO. | 62028-001 | $100.00 | WR28 Low Power Termination | 1 |
| MW. DEVELOPMENT CO. | 66028-1030 | $35.00 | WR28 Straight Section, 1-1/4 inch length, aluminum | 20 |
| M-WAVE DESIGN | 28WTA11 | $50.00 | WR28 90 degree Twist Section, 3 inches length | 1 |
| NARDA | V1067-03 | $350.00 | WR28 Directional Coupler, 3 dB coupling | 1 |
| NARDA | V1067-10 | $350.00 | WR28 Directional Coupler, 10 dB coupling | 3 |
| NARDA | V337-03 | $45.00 | WR28 Straight Section, 3 inches length | 3 |
| NARDA | V347E | $50.00 | WR28 90 degree E-Plane Bend | 1 |
| NARDA | V347H | $50.00 | WR28 90 degree H-Plane Bend | 4 |
| NARDA | V717-03 | $100.00 | WR28 3 dB Fixed Attenuator, 1 Watt maximum | 1 |
| NARDA | V727 | $265.00 | WR28 Direct Reading Variable Attenuator, 0-20 dB | 1 |
| NARDA DBS MICROWAVE | DB99-1164R2 | $275.00 | Downconverter,RF=38-40 GHz, LO=12.7-14G +7 dBm, IF=10-2500M,6V | 1 |
| OMEGA LABS | 10403 | $135.00 | WR28 Pickup Horn, 15 dBi, 2.5 in. length, 1.1 x 1.1 in. aperture | 2 |
| PACIFIC MILLIMETER | KaD | $235.00 | WR28 Flat Broadband Detector, negative polarity, 26.5-40 GHz | 9 |
| PAMTECH | RHG-1003 | $300.00 | WR28 Isolator, 20 dB, 26.5-40 GHz, 4-1/8 in., <1 dB ins. Loss | 2 |
| PENN ENGINEERING | 1430-1BM3 | $275.00 | WR28 x 2.4mm(f) Adapter, 1.30 VSWR | 2 |
| PENN ENGINEERING | 5030-111B-10 | $250.00 | WR28 Directional Coupler, 10 dB coupling | 2 |
| PRD | 157 | $175.00 | WR28 Direct Reading Variable Atten.,0-40 dB, 6" length, choke fl | 1 |
| PRD | 312-AF1 | $300.00 | WR28 E-H Plane Tuner, micrometer drives | 1 |
| QUASAR MICROWAVE | QDC22-810960 | $275.00 | WR28 Directional Coupler, 10 dB coupling | 1 |
| QUINSTAR | QAL-2800-AA | $285.00 | WR28 Variable Attenuator, 0-25 dB, micrometer drive | 1 |
| QUINSTAR | QIF-A-00000 | $400.00 | WR28 Full Band Isolator, 25 dB isolation, 1.5 dB insertion loss | 1 |
| QUINSTAR | QJR-2820-AA | $375.00 | WR28 Directional Coupler, 20 dB coupling, split block type | 1 |
| QUINSTAR | QNS-FB15TA | $395.00 | WR28 Noise Source, 15 dB ENR, 26.5-40 GHz | 1 |
| SAGE LABS | 1061 | $150.00 | WR28 Crystal Detector, negative polarity, 1N53B diode | 1 |
| SCIENTIFIC ATLANTA | 14-7-1 | $395.00 | WR28 Single-Ended Harmonic Mixer, 26.5-40 GHz, for 1780 receiver | 1 |
| SPACE KOM | DFKa-U | $295.00 | WR28 Downcoverter,13-20 GHz +20 dBm LO, IF=0.1-50 MHz,15V IF amp | 1 |
| SPECTRUM ELEKTRO. | WA-R028-HF01 | $295.00 | WR28 x 2.4mm(f) Adapter | 1 |
| SPERRY | 23V1 | $195.00 | WR28 Adjustable Short, micrometer read | ASK* |
| SPERRY | 405A | $150.00 | WR28 3-Port Crossguide Coupler, 20 dB coupling | 2 |
| SPERRY | D41V5 | $225.00 | WR28 Isolator, 23 dB, 26.5-40 GHz | 1 |
| SPINNER | 44402 | $115.00 | WR28 30 dB Fixed Attenuator, 1 Watt maximum | 2 |
| SYSTRON DONNER | DBD-430 | $200.00 | WR28 Variable Attenuator, 0-20 dB, 0-100 arbitrary dial scale | 3 |
| SYSTRON DONNER | DBD-450 | $100.00 | WR28 Low Power Termination, 1/2 Watt maximum | 1 |
| SYSTRON DONNER | DBD-510 | $115.00 | WR28 Pickup Horn, 10 dBi gain | 3 |
| SYSTRON DONNER | DBD-620 | $90.00 | WR28 H-Plane (Shunt) Tee | 1 |
| SYSTRON DONNER | DBD-675-3 | $300.00 | WR28 Directional Coupler, 3 dB coupling | 1 |
| SYSTRON DONNER | DBD-979-1 | $350.00 | WR28 E-H Plane Tuner, micrometer read drives | ASK* |
| SYSTRON DONNER | DBDE-018 | $145.00 | WR28 x WR42 Taper Section, 3 inches length | 1 |
| TEKTRONIX | WM490A | $395.00 | WR28 Harmonic Mixer, 26.5-40 GHz | 5 |
| TRAK MICROWAVE | 2571-1801 | $250.00 | WR28 Isolator, 20 dB, 26.5-40 GHz, <2 dB ins. Loss | 2 |
| TRAK MICROWAVE | 2571-1810 | $275.00 | WR28 Isolator, 20 dB, 26.5-40 GHz, <2 dB ins. Loss | 20 |
| TRG | 169A/599 | $65.00 | WR28 Isolator, 20 dB, 34.3-36.6 GHz, 3/4 inch insertion length | 1 |
| TRG | 580A/599 | $110.00 | WR28 Termination, 1 Watt max., 1.05 VSWR | 3 |
| TRG | 650A/599 | $90.00 | WR28 H-Plane (Shunt) Tee | 1 |
| TRG | A510 | $750.00 | WR28 Precision Direct Reading Attenuator, 0-50 dB | 1 |
| TRG | A520 | $225.00 | WR28 Variable Attenuator, 0-25 dB, vernier drive | 2 |
| TRG | A521-10 | $100.00 | WR28 10 dB Fixed Attenuator, 1 Watt maximum | 3 |
| TRG | A521-20 | $100.00 | WR28 20 dB Fixed Attenuator, 1 Watt maximum | 2 |
| TRG | A521-30 | $100.00 | WR28 30 dB Fixed Attenuator, 1 Watt maximum | 1 |
| TRG | A526 (UG381) | $100.00 | WR28 Variable Phase Shifter, 0-180 deg., round (UG-381/U) flange | 1 |
| TRG | A528 | $900.00 | WR28 Direct Reading Phase Shifter, 0-360 degrees | 4 |
| TRG | A551 | $400.00 | WR28 Direct Reading Frequency Meter, 26.5-40 GHz | 3 |
| TRG | A559-10 | $350.00 | WR28 Directional Coupler, 10 dB coupling | 4 |
| TRG | A585 | $235.00 | WR28 Moving Load, micrometer drive | 2 |
| TRG | A590 | $185.00 | WR28 Adjustable Short, micrometer drive | 2 |
| TRG | A660 | $50.00 | WR28 90 degree E-Plane Bend | 1 |
| TRG | A670 | $50.00 | WR28 90 degree H-Plane Bend | 2 |
| TRG | A681-RH/600 | $50.00 | WR28 90 degree Right Hand Twist Section, 1.5 inch, choke flanges | 2 |
| TRG | A689-01 | $35.00 | WR28 Straight Section, 1 inch length, cover/ choke flanges | 4 |
| TRG/ NEMS | A521-01 | $100.00 | WR28 1 dB Fixed Attenuator, 1 Watt maximum | 6 |
| UMT | 31 GHz BPFL | $85.00 | WR28 Band Pass Filter, 31.000-31.075 GHz | 8 |
| UMT | 31.25 GHz BPFL | $85.00 | WR28 Band Pass Filter, 31.225-31.3 GHz | 4 |
| UMT | 38.8 GHz BPFL | $85.00 | WR28 Band Pass Filter, 38.6-38.95 GHz | 4 |
| UMT | 39.5 GHz BPFL | $85.00 | WR28 Band Pass Filter, 39.3-39.65 GHz | 4 |
| UNIQUE BROADBAND | 148-28-30-1-KF | $150.00 | WR28 Short Loop Coupler, 30 dB, 2.92mm(f) sampling port | 2 |
| UNIQUE BROADBAND | 153-28-40-C-TI | $100.00 | WR28 Variable Phase Shifter, 0-180 degrees, uncalibrated drive | 1 |
| WATKINS JOHNSON | 2A6700N | $395.00 | WR28 Mixer, 11-20 GHz +15 dBm LO, 100kHz-6 GHz IF, 15V bias | 1 |
| WAVELINE | 100310 | $165.00 | WR28 (choke flange) Detector, negative polarity, BNC(f) | 1 |
| WAVELINE | 1006-40 | $100.00 | WR28 40 dB Fixed Attenuator, 1 Watt maximum | 2 |
| WAVELINE | 1014 | $175.00 | WR28 Tunable Detector (1N53), pos. polarity, uncalibrated drive | 1 |
| WAVELINE | 1022 | $1,000.00 | WR28 Direct Reading Precision Attenuator, 0-60 dB | 1 |
| WAVELINE | 1032 | $50.00 | WR28 90 degree E-Plane Bend, cover/choke flanges | 3 |
| WAVELINE | 1032-1 | $50.00 | WR28 90 degree E-Plane Bend, choke flanges | 1 |
| WAVELINE | 1032-2 | $50.00 | WR28 90 degree E-Plane Bend, cover flanges | 1 |
| WAVELINE | 1033 | $50.00 | WR28 90 degree H-Plane Bend, cover/choke flanges | 2 |
| WAVELINE | 1038 | $50.00 | WR28 45 degree E-Plane Bend, cover/choke flanges | 1 |
| WAVELINE | 1038-1 | $50.00 | WR28 45 degree E-Plane Bend, choke flanges | 1 |
| WAVELINE | 1038-2 | $50.00 | WR28 90 degree E-Plane Bend, cover flanges | 1 |
| WAVELINE | 1039 | $50.00 | WR28 45 degree H-Plane Bend, cover/choke flanges | 4 |
| WAVELINE | 1039-1 | $50.00 | WR28 90 degree H-Plane Bend, choke flanges | 1 |
| WAVELINE | 1039-2 | $50.00 | WR28 90 degree H-Plane Bend, cover flanges | 2 |
| WAVELINE | 1054 | $110.00 | WR28 Low Power Termination, 1 Watt maximum, 1.02 VSWR | 1 |
| WAVELINE | 1074-03 | $375.00 | WR28 Directional Coupler, 3 dB coupling | 2 |
| WAVELINE | 1074-06 | $375.00 | WR28 Directional Coupler, 6 dB coupling | 1 |
| WAVELINE | 1077-E | $475.00 | WR28 DPDT Motorized Switch, 28 VDC | 1 |
| WAVELINE | 1078-H | $325.00 | WR28 4-Port Manual Transfer Switch, H-Plane switching | 1 |
| WAVELINE | 1083 | $225.00 | WR28 E-H Plane Tuner, micrometer read | 1 |
| WAVELINE | 1085 | $90.00 | WR28 H-Plane (Shunt) Tee | 2 |
| WAVELINE | 1099 | $175.00 | WR28 Standard Gain Horn, 15 dBi gain mid-band | 1 |
| WAVELINE | 17-02137 | $50.00 | WR28 Assymertric 90 deg. H Bend, 1-3/4" x 1/18" legs, choke fl's | 2 |
| WAVETRONICS | 6618S-01 | $195.00 | WR28 Slide Screw Tuner, vernier read | ASK* |
| WILTRON | 35WR28K | $265.00 | WR28 x 2.92mm(m) Adapter | 1 |
| WILTRON | 35WR28KF | $265.00 | WR28 x 2.92mm(f) Adapter | 5 |
| | | | WR34 WAVEGUIDE: 22-33 GHz | |
| ATM | 34-620B-30/DSPM | $250.00 | WR34 Variable Attenuator, 0-30 dB, vernier drive | 1 |
| CMT | RA34-2.4MM-F-1A | $235.00 | WR34 x 2.4mm(f) Adapter | 3 |
| CMT | REB34-1A1A-3 | $65.00 | WR34 90 degree E-Plane Bend, aluminum, 3 inch bend radius | 2 |
| CMT | REB34-1B1B | $65.00 | WR34 90 degree E-Plane Bend, brass | 10 |
| CMT | RS34-1A1A-12-A | $115.00 | WR34 Straight Section, 12 inches length, aluminum *NEW* | 3 |
| CMT | RS34-1B1B-3.050 | $60.00 | WR34 Straight Section, 3.05 inches length, brass *NEW* | 2 |
| CMT | RS34-1B1B-3.0-NC | $60.00 | WR34 Straight Section, 3 inches length, brass *NEW* | 8 |
| CMT | RT34-1B1B-60-CW | $75.00 | WR34 60 degree Twist Section, 3 inches length, brass *NEW* | 3 |
| CMT | SP880609-008 | $75.00 | WR34 Straight Section, 8.85 inches length, aluminum | 2 |
| CMT | WT28-34-1A1A1A | $185.00 | WR34 x WR28 Taper Section, 3-15/16 inches length | 1 |
| FARRAN TECHNOLOGY | FLT-3137 | $395.00 | WR34 Mech.Tunable Gunn Osc., 23.6-27.3 GHz, 200mW, 5.2V, w/isol. | 1 |
| FARRAN TECHNOLOGY | FLT-3138 | $395.00 | WR34 Mech.Tunable Gunn Osc., 25.7-30.3 GHz, 250mW, 5.2V, w/isol. | 1 |
| FLANN MICROWAVE | 21020 | $295.00 | WR34 Variable Attenuator, 0-30 dB, micrometer drive, 1/2W max. | 1 |
| FLANN MICROWAVE | 21040 | $175.00 | WR34 Low Power Termination, 1.02 VSWR, 1/2W maximum | 1 |
| FLANN MICROWAVE | 21081-10 | $115.00 | WR34 10 dB Fixed Attenuator, 1/2W maximum | 1 |
| FLANN MICROWAVE | 21132-10 | $400.00 | WR34 Directional Coupler, 10 dB coupling | 1 |
| FLANN MICROWAVE | 21450 | $75.00 | WR34 90 degree Twist Section, 3-1/4 inches length | 1 |
| FLANN MICROWAVE | 21450-90LH | $75.00 | WR34 90 degree Twist Section, 3-1/4 inch length | 1 |
| FLANN MICROWAVE | 21460 | $65.00 | WR34 90 degree E-Plane Bend | 1 |
| FLANN MICROWAVE | 21470 | $65.00 | WR34 90 degree H-Plane Bend | 1 |
| GENERIC | WR34 1" straight | $45.00 | WR34 Straight Section, 1 inch length, cover/choke flanges, brass | 9 |
| GENERIC | WR34 3" flex | $50.00 | WR34 Jacketed Flexible Waveguide Section, 3 in. length, choke fl | 6 |
| HASCO | HA34FNT-14-CVS | $135.00 | WR34 Unjacketed Flexible Waveguide Section, 14 in. length *NEW* | 1 |
| HASCO | HA34TWR-3-CVT | $75.00 | WR34 90 degree Twist Section, 3 inches length, brass | 1 |
| LOGUS | LW34BSL-7X11 | $395.00 | WR34 Motorized DPDT Transfer Switch, 24VDC *UNUSED* | 4 |
| MARKI MICROWAVE | M97143 | $265.00 | WR34 Mixer, RF=22-33 GHz, LO=11-16.5 GHz +16 dBm, IF=DC-1 GHz | 1 |
| PENN ENGINEERING | 18404 | $60.00 | WR34 Feedthru Bulkhead, 2-1/8 in.length, 2-1/2 dia. mount, choke | 1 |
| | | | WR42 WAVEGUIDE: 18.0-26.5 GHz | |
| AEROWAVE | 42-2106 | $95.00 | WR42 Fixed Attenuator, 6 dB, 1 Watt, 19-22 GHz | 1 |
| AEROWAVE | 42-2808 | $75.00 | WR42 Series (E-Plane) Tee | 1 |
| AEROWAVE | 42-4000/20 | $375.00 | WR42 Directional Coupler, 20 dB coupling | 2 |
| AIRCOM | 120K | $115.00 | WR42 Low Power Termination, 1.05 VSWR, 1 Watt maximum | 1 |
| ALCATEL | 1876-SFO | $65.00 | WR42 Isoadapter, 20 dB isol., 17.7-19.7 GHz, WR42-in/SMAf-out | 2 |
| ALPHA INDUSTRIES | 62023600 | $265.00 | WR42 High Power Isolator, 20 dB, 18.0-22.5 GHz, 50 Watts | 3 |
| ANDREW | F042PB-0360Y5 | $195.00 | WR42 Flexible Twistable Waveguide, 36 inches length, cover/choke | 2 |
| ARRA | 42-400B-1 | $60.00 | WR42 90 degree E-Plane Bend, cover/choke flanges | 2 |
| BAYTRON | 3K-80/90H | $60.00 | WR42 90 degree H-Plane Bend | 1 |
| CMT | 58P37981W | $150.00 | WR42 Straight Section, 35 inches length, cover/choke fl's, alum. | 1 |
| CMT | RBC42-30 | $350.00 | WR42 Directional Coupler, 30 dB coupling | 1 |
| CTR | 201333 | $75.00 | WR42 Downconverter, RF=21-22 GHz, LO=6.5-7.0G, IF=1-2 GHz, +5V | 1 |
| CTR | 201335 | $75.00 | WR42 Downconverter, RF=25-26 GHz, LO=8.0-8.3G, IF=0.9-1.1G, +5V | 1 |
| DEFENSE COMM. ENG. | 042-225-20 | $275.00 | WR42 Directional Coupler, 20 dB coupling, >30 dB directivity | 1 |
| DEMORNAY BONARDI | DBE-313 | $150.00 | WR42 Tunable Detector, negative polarity, uncalibrated drive | 1 |
| DEMORNAY BONARDI | DBE-460 | $275.00 | WR42 (choke fl.) High Power Termination,150 Watts avg./100 kW pk | 1 |
| DEMORNAY BONARDI | DBE-520-15 | $195.00 | WR42 Standard Gain Horn, 15 dBi gain mid-band | 1 |
| DEMORNAY BONARDI | DBE-620 | $75.00 | WR42 Shunt (H-Plane) Tee | 1 |
| DEMORNAY BONARDI | DBE-630-20 | $185.00 | WR42 4-Port Crossguide Coupler, 20 dB coupling | 1 |
| DICO | 1002 | $90.00 | WR42 Fixed Attenuator, 6 dB, 2-1/2 inches length | 1 |
| DORADO INTL. | AN-0053-0 | $100.00 | WR42 Variable Attenuator, 0-30 dB, vernier drive | 1 |
| DORADO INTL. | FA42-30 | $90.00 | WR42 Fixed Attenuator, 30 dB | 2 |
| DORADO INTL. | GH-42-20 | $295.00 | WR42 Standard Gain Horn, 20 dBi gain mid-band | 1 |
| FERROCOM | 2200 | $75.00 | WR42 Isolator, 20 dB, 18.5-24.5 GHz | 38 |
| FLANN MICROWAVE | 20081-30 | $115.00 | WR42 Fixed Attenuator, 30 dB | 10 |
| FLANN MICROWAVE | 20094-KF20 | $285.00 | WR42 x 2.92mm(f) Adapter, VSWR 1.10 | 3 |
| FLANN MICROWAVE | 2011 | $1,200.00 | WR42 Precision Direct Reading Attenuator, 0-60 dB | 1 |
| FLANN MICROWAVE | 20113-01 | $1,100.00 | WR42 Precision Direct Reading Attenuator, 0-50 dB, w/travel case | 1 |
| FLANN MICROWAVE | 20333-3E/DS5741 | $950.00 | WR42 Motorized 4-position 4-port Switch, w/manual & GPIB control | 1 |
| FXR/MICROLAB | K157AF | $225.00 | WR42 Isolator, 20 dB isolation, 18.0-26.5 GHz | 1 |
| FXR/MICROLAB | K175AF-10 | $165.00 | WR42 Precision Fixed Attenuator, 10 dB, 2 Watts average | 4 |
| FXR/MICROLAB | K213CF | $125.00 | WR42 Hybrid Tee | 1 |
| FXR/MICROLAB | K312BF | $300.00 | WR42 E-H Plane Tuner, micrometer drives | 1 |
| FXR/MICROLAB | K312CF | $300.00 | WR42 E-H Plane Tuner, micrometer drives | 2 |
| FXR/MICROLAB | K610AF | $325.00 | WR42 Directional Coupler, 3 dB coupling | 1 |
| FXR/MICROLAB | K612DF | $185.00 | WR42 4-Port Crossguide Coupler, 20 dB coupling | 4 |
| FXR/MICROLAB | K622AF | $125.00 | WR42 Hybrid Tee | 1 |
| FXR/MICROLAB | K623BF | $60.00 | WR42 90 degree E-Plane Bend | 1 |
| FXR/MICROLAB | K6251AF | $60.00 | WR42 90 degree Twist Section, 2.5 inches length | 2 |
| FXR/MICROLAB | K630CF | $200.00 | WR42 Adjustable Short, micrometer drive | 2 |
| GENERIC | WR42 0.95" | $30.00 | WR42 Straight Section, 15/16 inch length, brass | 2 |
| GENERIC | WR42 4.5" straight | $45.00 | WR42 Straight Section, 4.5 inches length, aluminum,choke flanges | 3 |
| GENERIC | WR42 4.5" straight | $45.00 | WR42 Straight Section, 4.5 inches length, aluminum | 4 |
| GENERIC | WR42 6" straight | $50.00 | WR42 Straight Section, 6 inches length, aluminum, choke flanges | 4 |
| GENERIC | WR42 bulkhead | $35.00 | WR42 Bulkhead, 1.5 in. square x 0.62 in. thick, 4 hole mount | 9 |
| GENERIC | WR42 E 90 | $50.00 | WR42 90 degree E-Plane Bend, brass | 2 |
| GENERIC | WR42 E 90 mitre | $40.00 | WR42 90 degree E-Plane Mitre Bend, 2.5 inch legs, aluminum | 16 |
| GENERIC | WR42 twist | $60.00 | WR42 90 degree Twist Section, 11-1/2 inches length, cover/choke | 1 |
| GENERIC | WR42 twist 45 | $45.00 | WR42 45 degree Twist Section, 2 inches length, brass | 1 |
| HONEYWELL | CK-1 | $300.00 | WR42 Mixer, RF/LO=18-26.5 GHz, LO=+10 dBm, IF=DC-1 GHz | 1 |
| HONEYWELL | downconverter | $425.00 | WR42 Downconv.,RF=18-26.5GHz,LO=9-13GHz +16dBm,IF=1M-1G,15V | 1 |
| HONEYWELL | FK-U | $350.00 | WR42 Mixer,RF/LO=18-26.5 GHz,LO=+3 dBm,amplified IF=1-1000MHz | 1 |
| HONEYWELL | K5000N | $425.00 | WR42 Balanced Mixer, RF/LO=18-26.5 GHz, LO=+10 dBm, IF=DC-1 GHz | 1 |
| HP/AGILENT | 08747-60012 | $375.00 | WR42 2-Way Power Splitter, 6 dB split ratio, 40 dB return loss | 1 |
| HP/AGILENT | 11517A/19A/20A | $500.00 | Waveguide Mixer Set, 18.0-40.0 GHz coverage, for HP 8555A, 8565A | 2 |
| HP/AGILENT | 11970K | $395.00 | WR42 Harmonic Mixer, 18.0-26.5 GHz, for use with Agilelent an. | 14 |
| HP/AGILENT | 83570A/ 8350B | $3,000.00 | Sweep Oscillator, 18-26.5 GHz, +10 dBm levelled power, WR42 out | 3 |
| HP/AGILENT | 938A | $550.00 | WR42 Freq. Doubler, 0 to -100 dBm variable output, +20 dBm in | 2 |
| HP/AGILENT | K281C | $495.00 | WR42 x APC3.5(f) Adapter, VSWR <1.07 | 11 |
| HP/AGILENT | K362A | $275.00 | WR42 Low Pass Filter, 31 GHz (-30 dB) cutoff | 8 |
| HP/AGILENT | K375A | $350.00 | WR42 Direct Reading Variable Attenuator, 0-20 dB | 4 |
| HP/AGILENT | K382A | $1,750.00 | WR42 Precision Direct Reading Attenuator, 0-50 dB, 18.0-26.5 GHz | 3 |
| HP/AGILENT | K422A | $325.00 | WR42 Broadband Crystal Detector, negative polarity | 10 |
| HP/AGILENT | K422A-002 | $375.00 | WR42 Broadband Crystal Detector, neg., with matched load | 3 |
| HP/AGILENT | K422A-003 | $350.00 | WR42 Broadband Crystal Detector, positive polarity | 1 |
| HP/AGILENT | K422C | $500.00 | WR42 Broadband Crystal Detector, negative polarity | 3 |
| HP/AGILENT | K486A / 432A | $600.00 | WR42 Thermistor Mount, with HP 432A analog power meter | ASK* |
| HP/AGILENT | K532A | $400.00 | WR42 Direct Reading Frequency Meter, 0.11% accuracy | 9 |
| HP/AGILENT | K752A | $475.00 | WR42 Directional Coupler, 3 dB coupling | 15 |
| HP/AGILENT | K752C | $475.00 | WR42 Directional Coupler, 10 dB coupling | 9 |
| HP/AGILENT | K752D | $475.00 | WR42 Directional Coupler, 20 dB coupling | 9 |
| HP/AGILENT | K815B/814A/446B | $450.00 | WR42 Slotted Line, with carriage and detector | 1 |
| HP/AGILENT | K870A | $300.00 | WR42 Slide Screw Tuner, dual micrometer drives | 2 |
| HP/AGILENT | K914B | $250.00 | WR42 Moving Load, uncalibrated drive | 7 |
| HP/AGILENT | K920B | $250.00 | WR42 Adjustable Short, micrometer drive | 2 |
| HUGHES | 45110H-2000 | $350.00 | WR42 Full Band Isolator, 25 dB isolation, 1.5 dB insertion loss | 2 |
| HUGHES | 45320H-1310 | $425.00 | WR42 Directional Coupler, 10 dB coupling | 1 |
| HUGHES | 45350H-2220 | $225.00 | WR42 3-Port Crossguide Coupler, 20 dB coupling | 1 |
| HUGHES | 45410H-2090 | $65.00 | WR42 90 degree Twist Section, 2-9/16 inches length | 1 |
| HUGHES | 47340H-2100 | $395.00 | WR42 Tunable Single Ended Harmonic Mixer, 18.0-26.5 GHz | 1 |
| JUNCTION DEVICES | JDI-132KI | $225.00 | WR42 High Power Isolator, 25 dB, 20-23 GHz, 25 Watts | 6 |
| M WAVE DESIGN | 42CA1210 | $75.00 | WR42 x N(f) Adapter, 18-22 GHz | 1 |
| M/A-COM | 3-42-400/03 | $375.00 | WR42 Directional Coupler, 3 dB coupling | 1 |
| M/A-COM | 4-42-720-02 | $285.00 | WR42 Broadband Detector, negative polarity | 2 |
| MAURY MICROWAVE | K320D | $235.00 | WR42 Standard Mismatch, 1.20 VSWR | 1 |
| MAURY MICROWAVE | K344D | $85.00 | WR42 Fixed Short Circuit Termionation | 1 |
| MAURY MICROWAVE | K351 | $295.00 | WR42 5-Probe Tuner, matches 1.10 VSWR to <1.01, vernier drives | 2 |
| MDL | 42FP279 | $90.00 | WR42 Band Pass Filter, 23.4-24.4 GHz, 2.38 inches length | 1 |
| MDL | 42WT39 | $50.00 | WR42 Pressurization Section, 2-1/8 in. length, 1/4 in. NPT inlet | 1 |
| MDL | 42XT336-1F | $195.00 | WR42 3-Port Crossguide Coupler, 30 dB coupling | 3 |
| MICROTECH | 230927 | $95.00 | WR42 Flexible Twistable Waveguide, 6 inches length, cover/choke | 7 |
| MICROTECH | 231444 | $150.00 | WR42 Flexible Twistable Waveguide, 12 inches length, cover/choke | 2 |
| MICROTECH | 232531 | $185.00 | WR42 Flexible Twistable Waveguide 24 inches length, cover/choke | 1 |
| MICROWAVE ASSOC. | 654A | $300.00 | WR42 E-H Plane Tuner, micrometer drives | 1 |
| MICROWAVE ASSOC. | MA-11010 | $125.00 | WR42 Balanced Mixer, LO=+7 dBm, IF=DC-300 MHz/ BNC(f) | ASK* |
| MICROWAVE ASSOC. | MA-555 | $60.00 | WR42 90 degree E-Plane Bend | 1 |
| MICROWAVE ASSOC. | MA-618 | $85.00 | WR42 E-Plane (Series) Tee | 2 |
| MICROWAVE ASSOC. | MA-757B | $195.00 | WR42 Directional Coupler, 20 dB coupling | 1 |
| MILLITECH | CGP-42-S1050 | $300.00 | WR42 Directional Coupler, 10 dB coupling, split block style | 1 |
| MILLITECH | FBI-42-SSES0 | $375.00 | WR42 Full Band Isolator, 25 dB isolation, 1.5 dB insertion loss | 1 |
| MW. DEVELOPMENT CO. | 51042-20 | $300.00 | WR42 Directional Coupler, 20 dB coupling | 1 |
| MW. DEVELOPMENT CO. | 51042-316 | $350.00 | WR42 Directional Coupler, 30 dB coupling | 1 |
| MW. DEVELOPMENT CO. | 76042-179 | $100.00 | WR42 Fixed Attenuator, 65 dB, 1 Watt maximum | 2 |
| M-WAVE DESIGN | 42FA11B-5 | $40.00 | WR42 Straight Section, 1-1/2 inch length, brass | 2 |
| M-WAVE DESIGN | 42SSB11(4.5) | $60.00 | WR42 Straight Section, 4.5 inches length | 4 |
| NARDA | 1068-03 | $350.00 | WR42 Directional Coupler, 3 dB coupling | 1 |
| NARDA | 1068-20 | $350.00 | WR42 Directional Coupler, 20 dB coupling | 1 |
| NARDA | 308 | $175.00 | WR42 Sliding Short, micrometer drive | 1 |
| NARDA | 348E | $60.00 | WR42 90 degree E-Plane Bend | 2 |
| NARDA | 348H | $60.00 | WR42 90 degree H-Plane Bend | 1 |
| NARDA | 358 | $60.00 | WR42 90 degree Twist Section, 3 inches length | 2 |
| NARDA | 388 | $50.00 | WR42 round flange (UG425/U) to square flange (UG595/U) Adapter | 4 |
| NARDA | 518 | $150.00 | WR42 Tunable Single Ended Mixer, N(f) IF port | ASK* |
| NARDA | 718-03 | $100.00 | WR42 Fixed Attenuator, 3 dB, 1 Watt maximum | 1 |
| NARDA | 728 | $265.00 | WR42 Direct Reading Variable Attenuator, 0-20 dB | 2 |
| NDL | K611 | $225.00 | WR42 Slide Screw Tuner, micrometer drive | ASK* |
| PACIFIC MILLIMETER | 24-SSB | $295.00 | WR42 SSB Modulator, LO=24.0-24.8 GHz, IF=DC-100 MHz +8 dBm | 1 |
| POLARAD | XM18 | $100.00 | WR42 Tunable Single Ended Mixer | ASK* |
| PRD | 1205-7A | $100.00 | WR42 Tunable Single Ended Mixer, IF port N(f), 1N26 diode | ASK* |
| PRD | 1406-BF1 | $90.00 | WR42 Standard Mismatch, 26 dB return loss | 1 |
| PRD | 153-A | $165.00 | WR42 Variable Attenuator, 0-25 dB, gage read, 8-5/8 in. length | 1 |
| PRD | 153BF1 | $350.00 | WR42 Variable Attenuator, 0-35 dB, gage read | 1 |
| PRD | 155 | $195.00 | WR42 Direct Reading Variable Attenuator, 0-40 dB | 1 |
| PRD | 313A | $275.00 | WR42 E-H Plane Tuner, micrometer drives | 1 |
| PRD | 313AF1 | $300.00 | WR42 E-H Plane Tuner, micrometer drives | 2 |
| PRD | 321-AF1 | $175.00 | WR42 Sliding Short, micrometer reading | 2 |
| PRD | 471F1 | $60.00 | WR42 90 degree H-Plane Bend | 1 |
| PRD | K3414 | $60.00 | WR42 90 degree Twist Section, 3 inches length | 1 |
| PRD | K414-10F1 | $295.00 | WR42 Directional Coupler, 10 dB coupling | 3 |
| QUASAR MICROWAVE | QFA20SQB44244B10 | $115.00 | WR42 Fixed Attenuator, 10 dB, 1/2 Watt maximum | 12 |
| QUASAR MICROWAVE | WR42 26" flex | $165.00 | WR42 Jacketed Flexible / Twistable Section, 26 in., cover/choke | 1 |
| SCIENTIFIC ATLANTA | 14-6-1 | $500.00 | WR42 Single-Ended Harmonic Mixer, 18.0-26.5 GHz, for 1780 rcvr. | 2 |
| SCIENTIFIC ATLANTA | 14-6-2 | $450.00 | WR42 Single-Ended Harmonic Mixer, 18.0-26.5 GHz, for 1711 rcvr. | 2 |
| SONOMA SCIENTIFIC | 21A2 | $75.00 | WR42 Junction Isolator, 20 dB, 18.5-24.5 GHz | 20 |
| SONOMA SCIENTIFIC | 21A4 | $75.00 | WR42 Circulator, 20.6-24.8 GHz, 20 dB isolation | 7 |
| SPACEK LABS | 2X22-12 | $395.00 | WR42 Mixer,RF=20-26 GHz, doubled LO 13-17 GHz +18 dBm,IF=6-12GHz | ASK* |
| SPINNER | BN-569601 | $165.00 | WR42 Sliding Short, vernier drive | 1 |
| SYSTRON DONNER | 110571 | $125.00 | WR42 Single Ended Broadband Mixer, 18.0-26.5 GHz | 2 |
| SYSTRON DONNER | 7123A | $125.00 | WR42 Single Ended Mixer, for spectrum analyzers | 1 |
| SYSTRON DONNER | DBE-276 | $50.00 | WR42 Pressurization Unit, 3-1/2 in, length, choke flanges | 3 |
| SYSTRON DONNER | DBE-461 | $275.00 | WR42 High Power Termination, 150 Watts average/ 100 kW peak | 1 |
| TECHNICRAFT | TS-49140-2 | $115.00 | WR42 Jacketed Flexible Waveguide Section, 24 in., cover/choke fl | 4 |
| TEKTRONIX | 119-0098-00 | $150.00 | WR42 Single Ended Broadband Mixer | 1 |
| TEKTRONIX | WM490K | $395.00 | WR42 Harmonic Mixer, 18.0-26.5 GHz | 2 |
| TEKTRONIX | WM780K | $1,100.00 | WR42 Harmonic Mixer, 18.0-26.5 GHz | 1 |
| TRG | K590 | $175.00 | WR42 Adjustable Short, micrometer drive | 1 |
| WAVELINE | 80033 | $195.00 | WR42 Level Set Atten., 1-30 dB, 1 Watt max., uncalibrated drive | 2 |
| WAVELINE | 80176 | $225.00 | WR42 Slide Screw Tuner, vernier read | ASK* |
| WAVELINE | 803 | $195.00 | WR42 Direct Reading Variable Attenuator, 0-20 dB | 3 |
| WAVELINE | 808-C | $350.00 | WR42 Variable Phase Shifter, 0-180 degrees, gage read | 1 |
| WAVELINE | 812-DR | $295.00 | WR42 Direct Reading Var.Attenuator, 0-40 dB,calibrated at 24 GHz | 1 |
| WAVELINE | 833 | $60.00 | WR42 90 degree H-Plane Bend, cover/choke flanges | 1 |
| WAVELINE | 833-2 | $60.00 | WR42 90 degree H-Plane Bend | 1 |
| WAVELINE | 854 | $125.00 | WR42 Low Power Termination, 1.02 VSWR, 1 Watt maximum | 1 |
| WAVELINE | 858 | $125.00 | WR42 Hybrid Tee | 1 |
| WAVELINE | 861 | $175.00 | WR42 Adjustable Short, micrometer drive | 3 |
| WAVELINE | 869-20 | $185.00 | WR42 4-Port Crossguide Coupler, 20 dB coupling | 1 |
| WAVELINE | 874-20 | $375.00 | WR42 Directional Coupler, 20 dB coupling | 3 |
| WAVELINE | 874-3 | $375.00 | WR42 Directional Coupler, 3 dB coupling | 1 |
| WAVELINE | 878-E | $375.00 | WR42 4-Port Manual Transfer Switch, E-Plane switching | 1 |
| WAVELINE | 881 | $250.00 | WR42 Medium Power Load, 75 Watts average/ 80 kW peak | 3 |
| WAVELINE | 882 | $295.00 | WR42 Load, 150 Watts average/ 80 kW peak | 1 |
| WAVELINE | 890 | $60.00 | WR42 90 degree Twist Section, 4 inches length, cover/choke fl's | 1 |
| WAVELINE | 890-2 | $60.00 | WR42 90 degree Twist Section, 4 inches length | 2 |
| WILTRON | 35WR42K | $265.00 | WR42 x 2.92mm(m) Adapter | 1 |
| WILTRON | 35WR42KF | $265.00 | WR42 x 2.92mm(f) Adapter | 2 |
| WISEWAVE | FDB-42-01 | $475.00 | WR42 Mixer, RF/LO=18.0-26.5 GHz, LO=+13 dBm, IF=DC-8.5 GHz | 2 |
| | | | WR51 WAVEGUIDE: 15.0-22.0 GHz | |
| ATLANTIC MICROWAVE | CW5100 | $145.00 | WR51 x SMA(f) Adapter | 6 |
| BOGART | 17908 | $195.00 | WR51 SPDT Motorized Switch, 28VDC, choke flanges | 1 |
| CMT | HPT51 | $265.00 | WR51 High Power Termination, 143 Watts average | 1 |
| DEFENSE COMM. ENG. | 051-225-20 | $350.00 | WR51 Directional Coupler, 20 dB coupling | 1 |
| DEFENSE COMM. ENG. | 051-462 | $250.00 | WR51 Isolator, 30 dB, 15-22 GHz | 1 |
| FLANN MICROWAVE | 1911 | $1,100.00 | WR51 Precision Direct Reading Attenuator, 0-60 dB, UBR180 flange | 2 |
| GENERAL ELECTRIC | 126290 | $90.00 | WR51 x WR42 Waveguide Transition, 1.5 inch length | 1 |
| GENERIC | WR51 1.25" | $25.00 | WR51 Straight Section, 1.25 in., modified-UG419 or UBR180 flange | 4 |
| GENERIC | WR51 flex | $60.00 | WR51 Unjacketed Flex Waveguide Section, 4 in., cover/choke fl's | 3 |
| GENERIC | WR51 H 90 | $60.00 | WR51 90 degree H-Plane Bend, brass | 1 |
| GENERIC | WR51 lpfl | $135.00 | WR51 Low Pass Filter, -30 dB at 28 GHz | 1 |
| GENERIC | WR51 x WR42 | $115.00 | WR51 x WR42 Taper Section, 1.6 inch length | 1 |
| HASCO | HA51FNT-10-CVS | $110.00 | WR51 Unjacketed Flexible Waveguide Section, 10 in. length *NEW* | 1 |
| HASCO | HA51H90 | $60.00 | WR51 90 degree H-Plane Bend, brass | 4 |
| HASCO | HA51TWR-3.5 | $60.00 | WR51 90 degree Twist Section, 3.5 inch length, brass | 2 |
| HP/AGILENT | N362A | $235.00 | WR51 Low Pass Filter, 28.5 GHz (-30 dB) cutoff, UBR180 flanges | 1 |
| HP/AGILENT | NK292A | $100.00 | WR51 (UBR180 flange) x WR42 Waveguide Taper | 12 |
| HP/AGILENT | NP292A | $100.00 | WR51 (UBR180 flange) x WR62 Taper | 23 |
| LIEDER DEVELOPMENT | LD-5190E | $60.00 | WR51 90 degree E-Plane Bend, cover/choke flanges, brass | 1 |
| MAURY MICROWAVE | N135A | $60.00 | WR51 90 degree H-Plane Bend, aluminum | 1 |
| MAURY MICROWAVE | N200A2 | $300.00 | WR51 x 3.5mm(f) Adapter, 1.05 VSWR | 1 |
| MICROWAVE ASSOC. | WR51 circulator | $235.00 | WR51 Circulator, 20 dB isolation, 15-22 GHz | 2 |
| MITEC | WR51 24" flex | $150.00 | WR51 Flexible-Twistable Waveguide Section, 24 in., cover/choke | 1 |
| OMEGA LABS | 2782 | $75.00 | WR51 Tunable Detector | ASK* |
| OMEGA LABS | WR51 termination | $115.00 | WR51 Low Power Termination, 1 W, modified-UG419 or UBR180 flange | 1 |
| OMEGA LABS | WR51 var att | $150.00 | WR51 0-25 dB Variable Attenuator, vernier drive, UBR180 flanges | 3 |
| OMEGA LABS | WR51 x SMAf | $100.00 | WR51 (UBR180 flange) x SMA(f) Adapter | 1 |
| PENN ENGINEERING | 17685 | $135.00 | WR51 x WR75 Taper Section, 3 inches length | 1 |
| PENN ENGINEERING | 7336-1AM4 | $175.00 | Boeing SatSys 6-hole flange (WR51) Load, 100W avg./ 90kW pk | 2 |
| WAVELINE | 5106-40 | $100.00 | WR51 Fixed Attenuator, 40 dB | 1 |
| WAVELINE | 5122 | $950.00 | WR51 Precision Direct Reading Attenuator, 0-60 dB | 2 |
| WAVELINE | 5153 | $125.00 | WR51 Sliding Termination, uncalibrated drive | 1 |
| WAVELINE | 5174-20 | $400.00 | WR51 Directional Coupler, 20 dB coupling | 2 |
| | | | WR62 WAVEGUIDE: 12.4-18.0 GHz | |
| 3 dBm | KUW1151S | $195.00 | WR62 Shielded Isolator, 30 dB, 12.4-18.0 GHz | 3 |
| AIRCOM | 103-KU | $40.00 | WR62 90 degree E-Plane Bend | 7 |
| AIRCOM | 104-KU | $40.00 | WR62 90 degree H-Plane Bend | 10 |
| AIRTRON | TFT-57047 | $45.00 | WR62 Flexible Waveguide Section, 5 inches length | 4 |
| ALCATEL | 903499-99 | $45.00 | WR62 Band Pass Filter, 15.13-15.46 GHz, 3-1/2 inch length | 1 |
| ALCATEL | 904225-1 | $45.00 | WR62 Short Body Directional Coupler, 6 dB, 13-16.5 GHz, 6"length | ASK* |
| ALCATEL | 905521 | $75.00 | WR62 Circulator, 23 dB isolation, 12.4-14.5 GHz, 1.5 inch length | 23 |
| AMC | SL-91 | $75.00 | WR62 Sliding Load, uncalibrated drive, lockable | ASK* |
| AMERICON | 2000-6255 | $85.00 | WR62 x SMA(f) Adapter | 1 |
| ARRA | 062-660B | $75.00 | WR62 (choke flange) Termination, 1.5 Watt, brass body | 6 |
| ARRA | 62-462 | $95.00 | WR62 x SMA(f) Adapter | 1 |
| ATK / MRC | 30079 | $95.00 | WR62 Pickup Horn, 10 dBi gain | 1 |
| ATLANTIC MICROWAVE | CW6200 | $95.00 | WR62 x SMA(f) Adapter | 1 |
| CMC | 1P226-2V | $90.00 | WR62 Isolator, 20 dB, 14.25-15.75 GHz, 20 W handling | 7 |
| CMT | RBC62-10-1A1A | $200.00 | WR62 Directional Coupler, 10 dB coupling | 1 |
| DEFENSE COMM. ENG. | 062-225L-03 | $125.00 | WR62 Directional Coupler, 3 dB coupling | ASK* |
| DEFENSE COMM. ENG. | 062-225L-20 | $125.00 | WR62 Directional Coupler, 20 dB coupling | ASK* |
| DEMORNAY BONARDI | DBF-224 | $40.00 | WR62 90 degree E-Plane Bend | 8 |
| DEMORNAY BONARDI | DBF-234 | $40.00 | WR62 90 degree H-Plane Bend | 2 |
| DEMORNAY BONARDI | DBF-260 | $45.00 | WR62 E-Plane (Series) Tee | 1 |
| DEMORNAY BONARDI | DBF-271-5 | $50.00 | WR62 45 degree Twist Section, 5 inches length | 1 |
| DEMORNAY BONARDI | DBF-274-5 | $50.00 | WR62 90 degree Twist Section, 5 inches length | 2 |
| DEMORNAY BONARDI | DBF-310 | $75.00 | WR62 Crystal Detector | ASK* |
| DEMORNAY BONARDI | DBF-430 | $85.00 | WR62 Level Set Attenuator, 0-20 dB, uncalibrated drive | 2 |
| DEMORNAY BONARDI | DBF-461 | $225.00 | WR62 High Power Termination, 275 Watts average / 150 kW peak | 4 |
| DEMORNAY BONARDI | DBF-520-15 | $145.00 | WR62 Standard Gain Horn, 15 dBi gain mid-band | 1 |
| DEMORNAY BONARDI | DBF-620 | $45.00 | WR62 H-Plane (Shunt) Tee | 1 |
| DEMORNAY BONARDI | DBF-969A | $75.00 | WR62 Sliding Short, uncalibrated drive | 1 |
| E&M LABS | KU110LI | $165.00 | WR62 Isolator, 25 dB, 12.4-18.0 GHz | 2 |
| FARINON | 01-005474-00 | $75.00 | WR62 Isoadapter, 20 dB isol., 12.4-15 GHz, WR62 input/SMA(f) out | 4 |
| FERRITE COMP. | KuC3-511 | $75.00 | WR62 Circulator, 20 dB, 14-16 GHz, 1-1/2 inch insertion length | 6 |
| FERROCOM | 1571-SMI | $75.00 | WR62 Isoadapter, 20 dB isol., 12.4-15 GHz, SMA(m) input/WR62 out | 1 |
| FLANN MICROWAVE | 20565-001 | $75.00 | WR62 Fixed Attenuator, 6 dB | 1 |
| FXR/MICROLAB | WE-0065 | $95.00 | WR62 Medium Power Load, 150 Watts average/ 250 kW peak | 1 |
| FXR/MICROLAB | Y157A | $145.00 | WR62 Isolator, 20 dB, 12.4-18.0 GHz | 2 |
| FXR/MICROLAB | Y175A-03 | $85.00 | WR62 Precision Fixed Attenuator, 3 dB, 5 Watts maximum | 2 |
| FXR/MICROLAB | Y175A-06 | $85.00 | WR62 Precision Fixed Attenuator, 6 dB, 5 Watts maximum | 2 |
| FXR/MICROLAB | Y311A | $125.00 | WR62 Slide Screw Tuner | ASK* |
| FXR/MICROLAB | Y312C | $175.00 | WR62 E-H Plane Tuner, micrometer drives | 4 |
| FXR/MICROLAB | Y410A | $175.00 | WR62 Direct Reading Frequency Meter | 1 |
| FXR/MICROLAB | Y610A | $150.00 | WR62 Directional Coupler, 3 dB coupling | 3 |
| FXR/MICROLAB | Y610C | $150.00 | WR62 Directional Coupler, 10 dB coupling | 1 |
| FXR/MICROLAB | Y620A | $45.00 | WR62 E-Plane (Series) Tee | 1 |
| FXR/MICROLAB | Y623B | $40.00 | WR62 90 degree E-Plane Bend | 1 |
| FXR/MICROLAB | Y624A03 | $40.00 | WR62 90 degree H-Plane Bend, cover/choke flanges | 1 |
| FXR/MICROLAB | Y624B | $40.00 | WR62 90 degree H-Plane Bend | 1 |
| FXR/MICROLAB | Y641A | $150.00 | WR62 DPDT Transfer Switch, manually operated | 1 |
| GAMMA-F | CW-6260 | $100.00 | WR62 3-Port Crossguide Coupler, 60 dB, SMA(f) coupled port | 1 |
| GENERIC | WR62 x WR90 | $65.00 | WR62 x WR90 Taper Section, 4.33 inches length | 1 |
| GHZ TECHNOLOGIES | P362-40 | $225.00 | WR62 Directional Coupler, 40 dB coupling | 1 |
| HARRIS FARINON | U140154 | $75.00 | WR62 Circulator, 20 dB, 13.6-15.8 GHz | 1 |
| HP/AGILENT | 08747-60014 | $125.00 | WR62 Moving Short, 6 inches short travel, vernier read | 1 |
| HP/AGILENT | P281B | $95.00 | WR62 x APC7 Adapter | 22 |
| HP/AGILENT | P281B-013 | $95.00 | WR62 x N(f) Adapter | 8 |
| HP/AGILENT | P281C | $295.00 | WR62 x APC7 Adapter, 1.06 VSWR | 15 |
| HP/AGILENT | P281C-012 | $295.00 | WR62 x N(m) Adapter | 1 |
| HP/AGILENT | P281C-013 | $295.00 | WR62 x N(f) Adapter, 1.06 VSWR | 11 |
| HP/AGILENT | P362A | $235.00 | WR62 Low Pass Filter, 23 GHz (-30 dB) cutoff | 14 |
| HP/AGILENT | P370A | $85.00 | WR62 Fixed Attenuator, 3 dB, 1 Watt maximum | 2 |
| HP/AGILENT | P370C | $85.00 | WR62 Fixed Attenuator, 10 dB, 1 Watt maximum | 3 |
| HP/AGILENT | P372D | $135.00 | WR62 Precision Fixed Attenuator, 20 dB | 1 |
| HP/AGILENT | P375A | $150.00 | WR62 Direct Reading Variable Attenuator, 0-20 dB, 1 Watt max. | 4 |
| HP/AGILENT | P382A | $300.00 | WR62 Precision Direct Reading Attenuator, 0-50 dB | 15 |
| HP/AGILENT | P421A | $85.00 | WR62 Crystal Detector, negative polarity | 2 |
| HP/AGILENT | P424A | $125.00 | WR62 Crystal Detector, negative polarity | 27 |
| HP/AGILENT | P486A | $225.00 | WR62 Thermistor Mount, for HP 432 series power meters | 18 |
| HP/AGILENT | P532A | $200.00 | WR62 Direct Reading Frequency Meter, 0.1% accuracy | 21 |
| HP/AGILENT | P752A | $200.00 | WR62 Directional Coupler, 3 dB coupling | 29 |
| HP/AGILENT | P752C | $200.00 | WR62 Directional Coupler, 10 dB coupling | 14 |
| HP/AGILENT | P752D | $200.00 | WR62 Directional Coupler, 20 dB coupling | 11 |
| HP/AGILENT | P870A | $150.00 | WR62 Slide Screw Tuner, vernier read | 12 |
| HP/AGILENT | P880A | $195.00 | WR62 E-H Plane Tuner, micrometer drives | 2 |
| HP/AGILENT | P885A | $400.00 | WR62 Direct Reading Phase Shifter, 0-360 degrees | 6 |
| HP/AGILENT | P910A | $125.00 | WR62 Termination, 1 Watt | 23 |
| HP/AGILENT | P914A | $165.00 | WR62 Moving Load, uncalibrated drive | 7 |
| HP/AGILENT | P920A | $150.00 | WR62 Adjustable Short, micrometer drive | 1 |
| HP/AGILENT | P920B | $165.00 | WR62 Adjustable Short, micrometer drive | 2 |
| HP/AGILENT | P932A | $135.00 | WR62 Harmonic Mixer, for phase locking applications | 2 |
| M.C.S. | P-126 | $40.00 | WR62 90 degree E-Plane Bend | 1 |
| M.C.S. | P-136 | $40.00 | WR62 90 degree H-Plane Bend | 1 |
| M.C.S. | P-136-1 | $40.00 | WR62 90 degree H-Plane Bend, cover/ choke flanges | 3 |
| M.C.S. | P-218-03 | $65.00 | WR62 Fixed Attenuator, 3 dB at 14.0 GHz | ASK* |
| M.C.S. | P-218-06 | $65.00 | WR62 Fixed Attenuator, 6 dB at 14.0 GHz | ASK* |
| M.C.S. | P-218-10 | $65.00 | WR62 Fixed Attenuator, 10 dB at 14.0 GHz | ASK* |
| MAURY MICROWAVE | P200A2 | $185.00 | WR62 x 3.5mm(f) Adapter, 1.05 VSWR maximum | 1 |
| MAURY MICROWAVE | P209D2 | $185.00 | WR62 x APC7 Adapter, 1.05 VSWR | 2 |
| MAURY MICROWAVE | P211D2 | $145.00 | WR62 x SMA(m) Adapter, 1.05 VSWR | 1 |
| MAURY MICROWAVE | P213D2 | $125.00 | WR62 x N(f) Adapter, 1.05 VSWR | 1 |
| MAURY MICROWAVE | P214D2 | $125.00 | WR62 x N(m) Adapter, 1.05 VSWR | 1 |
| MAURY MICROWAVE | P216D | $115.00 | WR62 x TNC(m) Adapter, 1.25 VSWR *UNUSED* | 10 |
| MAURY MICROWAVE | P221W | $145.00 | WR62 (choke flange) x N(f) End Launch Adapter, VSWR<1.15 *NEW* | 5 |
| MAURY MICROWAVE | P229D | $125.00 | WR62 x APC7 End Launch Adapter, 1.25 VSWR | 1 |
| MAURY MICROWAVE | P301A | $100.00 | WR62 Termination, 1 Watt, 1.02 VSWR | 1 |
| MAURY MICROWAVE | P314 | $150.00 | WR62 Sliding Termination, uncalibrated drive, 1.006 VSWR, 1W max | 4 |
| MAURY MICROWAVE | P320D | $150.00 | WR62 Standard Mismatch, VSWR 1.20 | 2 |
| MAURY MICROWAVE | P340A1 | $100.00 | WR62 Fixed Offset Short, 0.352 cm | 1 |
| MAURY MICROWAVE | P344A | $50.00 | WR62 Flush Short Circuit Termination | 2 |
| MAURY MICROWAVE | P410C | $185.00 | WR62 Directional Coupler, 10 dB coupling | 1 |
| MAURY MICROWAVE | P410D | $185.00 | WR62 Directional Coupler, 20 dB coupling | 2 |
| MAURY MICROWAVE | P750A | $145.00 | WR62 Isolator, 20 dB, 12.4-18.0 GHz | 1 |
| MCS | 62-110-12 | $60.00 | WR62 Straight Section, 12 inches, cover/choke flanges | 1 |
| MCS | P-219-B | $75.00 | WR62 Fixed Attenuator, 10 dB | 1 |
| MDL | 6032904 | $275.00 | WR62 High Power Isolator, 20 dB, 16-18 GHz, 100 Watts average | 1 |
| MDL | 62AC126-2E | $95.00 | WR62 (choke flange) x SMA(f) Adapter | 1 |
| MDL | 62AC136-1F | $95.00 | WR62 x SMA(m) Adapter | 1 |
| MDL | 62AC86-1E | $85.00 | WR62 x SMA(f) Adapter | 1 |
| MDL | 62BH-18-2A | $40.00 | WR62 90 degree H-Plane Bend, cover/choke flanges | 3 |
| MDL | 62FP159A | $50.00 | WR62 Bandpass Filter, 16.39-16.41 GHz, 2 dB insertion loss | ASK* |
| MDL | 62LW36-1SP-1E | $35.00 | WR62 Short Body Termination, 1 Watt, VSWR 1.10, 1.63 in. length | 16 |
| MDL | 62XT436-16E | $85.00 | WR62 4-Port Crossguide Coupler, 30 dB, choke flanges | 1 |
| MDL | 62XT46 | $75.00 | WR62 3-Port Crossguide Coupler, 20 dB, choke flanges | 1 |
| MDL | 62XT466-R30P | $100.00 | WR62 4-Port Crossguide Coupler, 60 dB coupling, choke flanges | 1 |
| MDL | WR62 stepped twist | $40.00 | WR62 90 degree Stepped Twist Section, 1-3/4 in. length, cover/ch | 2 |
| MICROMEGA | 26341 | $145.00 | WR62 Isolator, 20 dB, 12.4-18 GHz | 2 |
| MICROTECH | MTPS62-501N12 | $135.00 | WR62 Jacketed Flexible Section, 12 in. length, cover/choke *NEW* | 2 |
| MICROTECH | MTPS62-501N24 | $145.00 | WR62 Jacketed Flexible Section, 24 in. length, cover/choke *NEW* | 1 |
| MICROWAVE ASSOC. | 8Q229 | $175.00 | WR62 Isolator, 25 dB, 12.4-18.0 GHz | 1 |
| MICROWAVE ASSOC. | MA-632 | $35.00 | WR62 90 degree E-Plane Bend | 1 |
| MICROWAVE ASSOC. | MA-887B | $100.00 | WR62 4-Port Crossguide Coupler, 30 dB coupling | 1 |
| MICROWAVE ENG. | P200-10 | $150.00 | WR62 Directional Coupler, 10 dB coupling | 1 |
| MICROWAVE PRODUCTS | KL-2004 | $40.00 | WR62 Isolator, 35 dB, 13.2-13.6 GHz, 1-5/8 inches length | 1 |
| MICROWAVE RESEARCH | P120 | $40.00 | WR62 90 degree E-Plane Bend | 2 |
| MICROWAVE RESEARCH | P130 | $40.00 | WR62 90 degree H-Plane Bend | 5 |
| MICROWAVE RESEARCH | P130-60 | $40.00 | WR52 60 degree H-Plane Bend | 4 |
| MICROWAVE RESEARCH | P40-7A | $95.00 | WR62 x APC7 Adapter | 1 |
| MIDWEST MICROWAVE | WGA-3667-TF-W62 | $95.00 | WR62 x TNC(f) Adapter | 1 |
| MILLIMETER PRODUCTS | 410KU | $95.00 | WR62 x SMA(f) Adapter | 1 |
| MITEC | M2 | $100.00 | WR62 3-Port Crossguide Coupler, 40 dB, SMA(f) coupled port | 1 |
| MITEC | WR62 4" flex | $35.00 | WR62 Unjacketed Flexible Section, 4-1/4 inches length | 9 |
| M-WAVE DESIGN | 62A1204 | $85.00 | WR62 x SMA(f) Adapter | 1 |
| M-WAVE DESIGN | 62CA1227 | $85.00 | WR62 x SMA(f) Adapter | 1 |
| NARDA | 1069-10 | $200.00 | WR62 High Directivity Coupler, 10 dB coupling, directivity 40 dB | 5 |
| NARDA | 1069-20 | $200.00 | WR62 High Directivity Coupler, 20 dB coupling, directivity 40 dB | 1 |
| NARDA | 319B | $225.00 | WR62 High Power Load, 250 Watts average / 160 kW peak | 8 |
| NARDA | 349-H | $45.00 | WR62 90 degree H-Plane Bend | 1 |
| NARDA | 409-05 | $125.00 | WR62 Standard Reflection, .05 reflection coefficient/ 1.11 VSWR | ASK* |
| NARDA | 409-10 | $125.00 | WR62 Standard Reflection, .091 reflection coefficient/ 1.20 VSWR | ASK* |
| NARDA | 409-15 | $125.00 | WR62 Standard Reflection, 0.15 reflection coeff./ 1.353 VSWR | ASK* |
| NARDA | 4609 | $95.00 | WR90 x SMA(f) Adapter | 5 |
| NARDA | 609 | $95.00 | WR62 x N(f) Adapter | 4 |
| NARDA | 639 | $195.00 | WR62 Standard Gain Horn, 16.5 dBi gain mid-band | 1 |
| NARDA | 719-06 | $75.00 | WR62 6 dB Fixed Attenuator | 1 |
| NARDA | 719-10 | $75.00 | WR62 10 dB Fixed Attenuator | 2 |
| OMEGA LABS | 969 | $85.00 | WR62 x APC7 Adapter | 1 |
| OMNI-SPECTRA | 2000-6265-00 | $95.00 | WR62 choke flange x SMA(f) Adapter | 1 |
| OMNI-SPECTRA | 20187/JA | $85.00 | WR62 x SMA(f) Adapter | 1 |
| OMNI-SPECTRA | 3000-6265-00 | $85.00 | WR62 (choke flange) x N(f) Adapter | 1 |
| P&H LABS | C3-P15333 | $45.00 | WR62 Junction Isolator, 25 dB, 12.7-16.8 GHz | 1 |
| PRD | 1131 | $125.00 | WR62 Sliding Load | ASK* |
| PRD | 158-B | $75.00 | WR62 Level Set Attenuator, 0-40 dB | 1 |
| PRD | 314-A | $175.00 | WR62 Slide Screw Tuner, micrometer drives | 1 |
| PRD | 320-A | $75.00 | WR62 Sliding Short, micrometer read | ASK* |
| PRD | 413 | $135.00 | WR62 Directional Coupler, 10 dB coupling | 1 |
| PRD | 616-A | $85.00 | WR62 Tunable Detector | ASK* |
| PRD | U-101 | $250.00 | WR62 Precision Direct Reading Attenuator, 0-60 dB | 1 |
| PRD | U-600 | $60.00 | WR62 Balanced Mixer, waveguide RF & LO ports, TNC(f) IF output | ASK* |
| RAYTHEON | 2428852-1 | $175.00 | WR62 Short Body Dir. Coupler, 50 dB, 6" length,all choke flanges | 2 |
| RAYTHEON | 2859568-1 | $85.00 | WR62 x SMA(f) Adapter | 1 |
| SCIENTIFIC ATLANTA | 13A-12 | $65.00 | WR62 Tunable Single Ended Mixer, 1N78 diode, N(f) IF port | ASK* |
| SECTOR MICROWAVE | SMU-4CL1-P | $225.00 | WR62 Manual or Motor operated DPDT Switch, 28V, choke flanges | 14 |
| SIVERS LAB | SL-7030/61B | $150.00 | WR62 4-Position 4-Port Switch, manually operated | 2 |
| SONOMA SCIENTIFIC | S-73N3 | $40.00 | WR62 Gunn Oscillator, 11.27 GHz +20 dBm, 10V 580mA | ASK* |
| SPERRY | 47U2 | $85.00 | WR62 Level Set Attenuator, 0-40 dB, gage read | 2 |
| SPERRY | 626177-1 | $145.00 | WR62 Standard Gain Horn, 16.5 dBi gain mid-band | 1 |
| SPERRY | D41U5 | $175.00 | WR62 Isolator, 30 dB, 12.4-18.0 GHz | 1 |
| SPERRY MICROWAVE | 42U1 | $75.00 | WR62 Termination, 1 Watt | 1 |
| STRUTHERS | 104693 | $150.00 | WR62 Pickup Horn, integral transition to N(f), 15 dBi gain | 2 |
| STRUTHERS | 1106 | $90.00 | WR62 Pickup Horn, 15 dBi gain | 1 |
| SYSTRON DONNER | 37000-561 | $50.00 | WR62 Single Ended Mixer | ASK* |
| SYSTRON DONNER | 7120A | $75.00 | WR62 Single Ended Mixer, for spectrum analyzers | 1 |
| SYSTRON DONNER | DBF-058 | $95.00 | WR62 x SMA(f) Adapter | 2 |
| SYSTRON DONNER | DBF-059 | $85.00 | WR62 x APC7 Adapter | 1 |
| SYSTRON DONNER | DBF-275 | $60.00 | WR62 Feedthrough Bulkhead, 3 in. length, with gasket | 1 |
| SYSTRON DONNER | DBF-440A-10 | $65.00 | WR62 Fixed Attenuator, 10 dB | ASK* |
| SYSTRON DONNER | DBF-631-20 | $100.00 | WR62 3-port Crossguide Coupler, 20 dB coupling | 1 |
| SYSTRON DONNER | DBF-631-30 | $100.00 | WR62 3-port Crossguide Coupler, 30 dB coupling | 1 |
| SYSTRON DONNER | DBF-642-20 | $150.00 | WR62 Crossguide Dual Dir. Coupler, 20 dB, N(f) coupled ports | 1 |
| SYSTRON DONNER | DBF-655 | $85.00 | WR62 Matched Hybrid Tee | 1 |
| SYSTRON DONNER | DBF-675-30 | $225.00 | WR62 Directional Coupler, 30 dB coupling | 1 |
| TEKTRONIX | 119-0097-00 | $100.00 | WR62 Single Ended Broadband Mixer | 2 |
| TELEDYNE MICROWAVE | WS-01P21-1 | $150.00 | WR62 DPDT Relay, 115 VAC coil | 2 |
| TELEDYNE MICROWAVE | WS-02P21-2 | $135.00 | WR62 SPDT Relay, 115 VAC coil | 4 |
| TERRACOM | 140-0648 | $45.00 | WR62 Bandpass Filter, 15.080-15.165 GHz, 4-1/2 inches length | 1 |
| TRANSCO | 3300040 | $195.00 | WR62 SPDT Latching Switch, 28 VDC operation | 1 |
| VARIAN | VSU-9002-KR | $40.00 | WR62 Gunn Osc., 14.25 GHz, +16 dBm, mech.tune, 10V 320mA | 1 |
| VARIAN | VSX-9001-WI | $40.00 | WR62 Gunn Osc., 12.0 GHz, +20 dBm, mech.tune, 10.5V 300mA | 1 |
| WAVEGUIDE ENG. | 062-2058-2 | $85.00 | WR62 (choke flange) x SMA(f) Adapter | 2 |
| WAVELINE | 70067-P2 | $50.00 | WR62 Short Body Dir.Cplr., 10 dB, 13-16 GHz, 6 in., >20 dB dir. | 6 |
| WAVELINE | 70085 | $295.00 | WR62 Panel Mounting Direct Reading Precision Atten.,0-67 dB*NEW* | 6 |
| WAVELINE | 701 | $85.00 | WR62 x SMA(f) Adapter | 1 |
| WAVELINE | 701-NF | $95.00 | WR62 x N(f) Adapter | 1 |
| WAVELINE | 701-TNCF | $95.00 | WR62 x TNC(f) Adapter | 2 |
| WAVELINE | 702-20 | $95.00 | WR62 Precision Attenuator, 20 dB | 1 |
| WAVELINE | 70595 | $175.00 | WR62 Directional Coupler, 10 dB coupling, 40 dB directivity | 5 |
| WAVELINE | 707-10 | $65.00 | WR62 Fixed Attenuator, 10 dB | 1 |
| WAVELINE | 708 | $225.00 | WR62 Variable Phase Shifter, 0-180 degrees, gage read | 1 |
| WAVELINE | 71057 | $100.00 | WR62 3-Port Crossguide Cplr., 50 dB coupling,input port choke fl | 6 |
| WAVELINE | 71185 | $250.00 | WR62 Dual Dir.Cplr.,10 dB coupling, input& both coupled ports Nf | 1 |
| WAVELINE | 71270 | $200.00 | WR62 Directional Coupler, 40 dB coupling, choke flanges | 1 |
| WAVELINE | 717 | $60.00 | WR62 Detector Mount, negative polarity, 1N78 crystal | 2 |
| WAVELINE | 732 | $40.00 | WR62 90 degree E-Plane Bend, cover/ choke flanges | 10 |
| WAVELINE | 732-1 | $40.00 | WR62 90 degree E-Plane Bend, choke flanges | 3 |
| WAVELINE | 733 | $40.00 | WR62 90 degree H-Plane Bend, cover/ choke flanges | 9 |
| WAVELINE | 741-03 | $35.00 | WR62 Straight Section, 3 inches length, cover/choke flanges | 1 |
| WAVELINE | 754 | $90.00 | WR62 Termination, 1 Watt | 3 |
| WAVELINE | 758 | $85.00 | WR62 Matched Hybrid Tee | 1 |
| WAVELINE | 769-20 | $90.00 | WR62 4-port Crossguide Coupler, 20 dB coupling | 1 |
| WAVELINE | 770-20 | $100.00 | WR62 3-port Crossguide Coupler, 20 dB coupling | 5 |
| WAVELINE | 770-40 | $100.00 | WR62 3-port Crossguide Coupler, 40 dB coupling | 3 |
| WAVELINE | 772-50 | $200.00 | WR62 Narrow Wall Directional Coupler, 50 dB coupling | 3 |
| WAVELINE | 773-10 | $200.00 | WR62 Ultra-Flat Directional Coupler, 10 dB coupling | 1 |
| WAVELINE | 774-03 | $200.00 | WR62 Directional Coupler, 3 dB coupling | 1 |
| WAVELINE | 774-06 | $200.00 | WR62 Directional Coupler, 6 dB coupling | 1 |
| WAVELINE | 774-10 | $200.00 | WR62 Directional Coupler, 10 dB coupling | 2 |
| WAVELINE | 774-20 | $200.00 | WR62 Directional Coupler, 20 dB coupling | 2 |
| WAVELINE | 778-E | $150.00 | WR62 4-Port Manual Transfer Switch, E-Plane switching | 2 |
| WAVELINE | 778-H | $150.00 | WR62 4-Port Manual Transfer Switch, H-Plane switching | 2 |
| WAVELINE | 781 | $150.00 | WR62 Medium Power Load, 100 Watts average/ 160 kW peak | 3 |
| WAVELINE | 782 | $200.00 | WR62 Load, 250 Watts average / 160 kW peak | 5 |
| WAVELINE | 783 | $95.00 | WR62 Slide Screw Tuner, uncalibrated drives | ASK* |
| | | | WR75 WAVEGUIDE: 10.0-15.0 GHz | |
| 3 dBm | M-111 | $150.00 | WR15 Isolator, 25 dB, 10.0-14.5 GHz | 1 |
| AMC | CG-S-40 | $100.00 | WR75 3-Port Crossguide Coupler, 40 dB, SMA(f) coupled port | 2 |
| AML | 3844117 | $20.00 | WR75 Tuned Load, 12.6-13.0 GHz, 5 Watts, VSWR <1.2, 0.8" length | 50 |
| ANDREW | 55000-75 | $45.00 | WR75 Pressure Window Assembly, 10-15 GHz *NEW* | 1 |
| ANDREW | 55675-75 | $40.00 | WR75 Pressurization Section,5/8" thick, 3/8" inlet, cover/choke | 1 |
| ANDREW | 59220-13 | $75.00 | WR90 x WR75 Taper Section, 6 inches length | 1 |
| APOLLO MICROWAVES | 10707-9 | $100.00 | WR75 3-Port Crossguide Coupler, 30 dB, SMA(f) coupled port | 1 |
| APOLLO MICROWAVES | 12087 | $40.00 | WR75 180 degree E-Plane Bend, 2.62 inches center to center | 1 |
| APOLLO MICROWAVES | 13195 | $100.00 | WR75 3-Port Crossguide Coupler, 40 dB, TNC(f) coupled port | 1 |
| ARRA | 75-227-3 | $35.00 | WR75 Unjacketed Flexible Waveguide Section, 3 inches length | 1 |
| ARRA | 75-462 | $95.00 | WR75 x SMA(f) Adapter | 2 |
| ARRA | 75-463 | $95.00 | WR75 x APC7 Adapter, alumnum body | 6 |
| ARRA | 75-463B | $95.00 | WR75 x APC7 Adapter, brass body | 1 |
| ARRA | 75-601-20 | $100.00 | WR75 3-Port Crossguide Coupler, 20 dB coupling | 1 |
| ATLANTIC MICROWAVE | AMC-0544-04 | $65.00 | WR75 4 dB Fixed Attenuator | 2 |
| ATLANTIC MICROWAVE | AMC-0544-38 | $65.00 | WR75 38 dB Fixed Attenuator | 1 |
| ATLANTIC MICROWAVE | CW7500 | $95.00 | WR75 x SMA(f) Adapter | 5 |
| CASWELL ELEC. | KE-101-D | $85.00 | WR75 Isolator, 20 dB, 10-13 GHz | 1 |
| CMT | RA75-SMA-F-13A-AA | $100.00 | CPR75 x SMA(f) Adapter | 1 |
| CMT | REB75-13B-13B | $50.00 | CPR75 90 degree E-Plane Bend, flat flanges | 1 |
| CMT | RFG75-6.25 | $40.00 | WR75 Jacketed Flexible Waveguide Section, 6-1/4 inches length | 1 |
| CMT | RPS75-2SMAF40 | $95.00 | WR75 Power Sampler, 40 dB coupling/SMA(f), 0.75 in. length *NEW* | 7 |
| CMT | RPW75 | $45.00 | WR75 Kapton Pressure Window, 30 PSI, 750 Watts, cover/choke | 1 |
| COM DEV LTD. | 10884-2 | $65.00 | WR75 Bandpass Filter, 11.6-12.2 GHz, 6 inches length | 1 |
| DEMORNAY BONARDI | DBFA-456A | $125.00 | WR75 Sliding Load, uncalibrated drive | 1 |
| E&M LABS | M110LI | $195.00 | WR75 Isolator, 25 dB, 10-15 GHz | 4 |
| FARINON | 107132S | $75.00 | WR75 Isoadapter, WR75 output/ SMAf input, 20 dB isol., 13-15 GHz | 2 |
| FARINON | SD-101922 | $60.00 | WR75 Bandpass Filter, 11.560-11.615 GHz, 4.25 in. length | 1 |
| FLANN MICROWAVE | 1711 | $500.00 | WR75 Precision Direct Reading Attenuator, 0-60 dB | 1 |
| GENERIC | CPR75 LOAD | $35.00 | CPR75 5 Watt Load | 2 |
| GENERIC | WR62 x WR75 | $75.00 | WR62 x WR75 Taper Section, 3 inches length | 1 |
| GENERIC | WR75 13GHz LPFL | $65.00 | WR75 Low Pass Filter, 13.3 GHz, 5 inches length | 1 |
| GENERIC | WR75 14.5G BP | $60.00 | WR75 Bandpass Filter, 14.275-14.925 GHz, 5.5 in. length | 1 |
| GENERIC | WR75 180 H | $40.00 | WR75 180 degree H-Plane Bend, 4.12 inches center to center | 1 |
| GENERIC | WR75 20.5" | $60.00 | WR75 Straight Section, 20-1/2 inches length, brass | 6 |
| GENERIC | WR75 34.5" | $85.00 | WR75 Straight Section, 34-1/2 inches length, aluminum, choke fl. | 1 |
| GENERIC | WR75 4.62" FLEX | $35.00 | WR75 Unjacketed Flexible Waveguide Section, 4-5/8 inches length | 1 |
| GENERIC | WR75 7.5" FLEX | $35.00 | WR75 Unjacketed Flexible Waveguide Section, 7-1/2 inches length | 18 |
| GENERIC | WR75 90 H | $40.00 | WR75 90 degree H-Plane Bend | 9 |
| GENERIC | WR75 BPFL | $75.00 | WR75 Full Band Bandpass Filter, 9 GHz & 16 GHz rolloffs, 5.5 in. | 1 |
| GENERIC | WR75 E 45 | $40.00 | WR75 45 degree E-Plane Bend | 1 |
| GENERIC | WR75 H TEE | $50.00 | WR75 H-Plane (Shunt) Tee | 5 |
| GENERIC | WR75 Press.Section | $50.00 | WR75 Pressurization Section,1/4"NPT inlet,1/2" thick,cover/choke | 1 |
| GENERIC | WR75 x CPR75 | $45.00 | WR75 x CPR75 (grooved) Flange Adapter, 1-7/8 inch length, brass | 1 |
| GENERIC | WR75(choke)-SMAf | $85.00 | WR75 (choke flange) x SMA(f) Adapter | 1 |
| GHZ TECHNOLOGIES | LD75BW-40CV | $300.00 | WR75 Directional Coupler, 40 dB coupling | 1 |
| HARRIS | SD-60477 | $95.00 | WR75 Bandpass Filter, 11.45-11.49 GHz, with 20/40/60 dB step att | 1 |
| HARRIS FARINON | W117122T | $95.00 | WR75 Junction Isolator, 35 dB, 11.7-12.2 GHz | 10 |
| HP/AGILENT | M362A | $235.00 | WR75 Low Pass Filter, 19 GHz (-30 dB) cutoff | 4 |
| HP/AGILENT | M375A | $150.00 | WR75 Direct Reading Variable Attenuator, 0-20 dB, 1 Watt max. | 3 |
| HP/AGILENT | M382A | $550.00 | WR75 Direct Reading Precision Attenuator, 0-50 dB | 1 |
| HP/AGILENT | M421A | $90.00 | WR75 Crystal Detector, negative polarity | 1 |
| HP/AGILENT | M424A | $125.00 | WR75 Crystal Detector, negative polarity | 6 |
| HP/AGILENT | M486A | $225.00 | WR75 Thermistor Mount, for HP 432 series power meters | 2 |
| HP/AGILENT | M532A | $250.00 | WR75 Direct Reading Frequency Meter | 4 |
| HP/AGILENT | M870A | $175.00 | WR75 Slide Screw Tuner, vernier read | 2 |
| HP/AGILENT | M920A | $175.00 | WR75 Adjustable Short, micrometer drive | 1 |
| HP/AGILENT | MP292B | $125.00 | WR75 x WR62 Waveguide Taper | 14 |
| HP/AGILENT | MX292B | $125.00 | WR90 x WR75 Waveguide Taper | 11 |
| HUGHES | 100-008-04 | $65.00 | WR75 Circulator, 16 dB isolation, 11-14 GHz | 89 |
| HUGHES | 100-576 | $65.00 | WR75 Detector, positive polarity (1N78B), BNC(f) output | 5 |
| HUGHES | 2098248-001 | $65.00 | Fixed Phase Shifter, resettable in 0-180 degree range | 2 |
| HUGHES | 2099385 | $65.00 | WR75 29 dB Fixed Attenuator | 1 |
| HUGHES | 2099425-024 | $75.00 | WR75 Bandpass Filter, 12.7-13.2 GHz, cover/choke flanges | 1 |
| KEVLIN MICROWAVE | 3166 | $150.00 | WR75 Rotary Joint, 13.25-14.75 GHz | 1 |
| KMW | KWAS75 | $45.00 | WR75 x SMA(f) Adapter *NEW* | 26 |
| KW MICROWAVE | 58-S04 | $25.00 | WR75 Pressurization Section, 0.6 inch thick, cover/choke flanges | 3 |
| KW MICROWAVE | 64-S36 | $100.00 | WR75 3-Port Crossguide Coupler, 50 dB, SMA(f) coupled port | 1 |
| KW MICROWAVE | 64-S37 | $100.00 | WR75 3-Port Crossguide Coupler, 30 dB, SMA(f) coupled port | 1 |
| LOGUS | LM75BPLXX76 | $200.00 | WR75/CPR75 DPDT Transfer Switch, manual or 24VDC operation | 9 |
| LOGUS | LM75BXLXX128 | $200.00 | WR75 DPDT Transfer Switch, manual or 22-32 VDC operation | 2 |
| LOGUS | LO75BUL7X51 | $200.00 | WR75 DPDT Transfer Switch, manual or 24VDC operation | 1 |
| LORAL | 23649G1 | $95.00 | CPR75 (grooved flange) x N(f) Adapter | 1 |
| M/A-COM | 7000-6257-00 | $95.00 | WR75 x APC7 Adapter | 2 |
| M/A-COM ASSOC. | WR75 8 dB att. | $65.00 | WR75 8 dB Fixed Attenuator | 1 |
| MAURY MICROWAVE | M103A5 | $60.00 | WR75 Standard Section, 5 inches length | 2 |
| MAURY MICROWAVE | M229A6 | $135.00 | WR75 x APC7 End Launch Adapter, 1.15 VSWR | 1 |
| MAURY MICROWAVE | M229D | $135.00 | WR75 x APC7 End Launch Adapter, 1.25 VSWR | 1 |
| MAURY MICROWAVE | M230K1 | $250.00 | WR75 x 3.5mm NMD Adapter, for HP 8510/8720/PNA analyzers | 1 |
| MAURY MICROWAVE | M301A | $135.00 | WR75 Termination, 1 Watt, 1.02 VSWR | 1 |
| MAURY MICROWAVE | M313 | $165.00 | WR75 Sliding Termination, 1.01 VSWR, 1.5 Watts maximum | 1 |
| MAURY MICROWAVE | M340A & M340B | $150.00 | WR75 1/8 and 3/8 wavelength (0.450cm & 1.349cm) Offset Shorts | 1 |
| MAURY MICROWAVE | M344A | $50.00 | WR75 Flush Short Circuit Termination | 1 |
| MAURY MICROWAVE | M750A | $235.00 | WR75 Isolator, 30 dB isolation, 10-15 GHz | 1 |
| MDL | 75BE18-1E | $45.00 | WR75 90 degree E-Plane Bend | 1 |
| MDL | 75BH18-1E | $45.00 | WR75 90 degree H-Plane Bend | 6 |
| MDL | 75CT56-1E | $185.00 | WR75 Short Body Dir.Cplr., 30 dB coupling, 6.5",directivity 25dB | 1 |
| MDL | 75FL4Y | $85.00 | WR75 14.1 GHz Low Pass Filter, -30 dB at 14.75 GHz, 3.5 inches | 1 |
| MICROWAVE ASSOC. | J6153 | $75.00 | WR75 Circulator, 20 dB isolation, 10-13 GHz | 18 |
| MICROWAVE RESEARCH | M240-417 | $90.00 | Half Height WR75 x 7mm Adapter,1.17x1.00" flange,0.87x0.75"holes | 3 |
| MICROWAVE RESEARCH | M70-L | $110.00 | WR75 Low Pass Filter, 10-15 GHz passband, -30 dB at 18 GHz | 2 |
| MID-CENTURY | 17/ 14 | $175.00 | WR75 4-Port Directional Coupler,30dB, needs external termination | 4 |
| MITEC | F341 | $95.00 | WR75 x SMA(f) Adapter | 1 |
| MITEC | M1226 | $100.00 | WR75 3-Port Crossguide Coupler, 40 dB, SMA(f) coupled port | 6 |
| MITEQ | FLT-105449 | $50.00 | WR75 Bandpass Filter, 11.375-11.725 GHz , 4.75 in. length | 1 |
| M-WAVE DESIGN | 75CA1SF | $90.00 | WR75 x SMA(f) Adapter | 5 |
| M-WAVE DESIGN | 75IR | $165.00 | WR75 Isolator, 25 dB, 10.0-14.5 GHz | 1 |
| NEICO MICROWAVE | 16712 | $200.00 | CPR75 DPDT Transfer Switch, manual or 24VDC operation | 2 |
| NEICO MICROWAVE | 16766-1 | $35.00 | CPR75 90 degree E-Plane Mitre Bend, 6" x 1-3/4" legs | 14 |
| NEICO MICROWAVE | 16768-1 | $35.00 | CPR75 180 degree (U-Shape) E-Plane Mitre Bend, 7 in. c-to-c | 1 |
| NEICO MICROWAVE | 16802-1 | $35.00 | CPR75 90 degree E-Plane Mitre Bend, 4-1/2" x 1" legs | 9 |
| NEICO MICROWAVE | 16811-1 | $35.00 | CPR75 Staight Section, 3-1/2 inches length, grooved flanges | 1 |
| NEICO MICROWAVE | 30501-G1 | $125.00 | CPR75 Short Body Dir. Coupler, 10 dB coupling, 3" long,11-15 GHz | 2 |
| OMEGA LABS | 3145 | $65.00 | WR75 6 dB Fixed Attenuator | 1 |
| PAMTECH | RHG2011 | $85.00 | WR75 Isolator, 25 dB, 10.8-12.3 GHz | 1 |
| PRODELIN | WR62 x WR75 | $85.00 | WR62 (choke flange) x WR75 Taper Section, 3 inches length | 1 |
| PRODELIN | WR75 x WR90 | $85.00 | WR75 x WR90 (choke flange) Taper Section, 3 inches length | 1 |
| RACAL | 220-374-1 | $85.00 | WR75/CPR75 x WR62 (choke flange) Taper Section, 1.5 in.length | 6 |
| RAYTHEON | A314634-P2 | $85.00 | WR75 Level Set Attenuator, 0-35 dB, uncalibrated | 1 |
| SECTOR MICROWAVE | SM75-4GL5 | $225.00 | WR75 Manual or Motor operated DPDT Switch, 235VAC | 1 |
| SECTOR MICROWAVE | SM75-4PL3 | $225.00 | WR75 Manual or Motor operated DPDT Switch, 117VAC | 3 |
| STRUTHERS | H123XG-40 | $145.00 | WR75 Variable Attenuator, 0-40 dB | 1 |
| STRUTHERS ELEC. | H120XG-3 | $75.00 | WR75 3 dB Fixed Attenuator, 1 Watt maximum | 1 |
| SYSTRON DONNER | DBFA-058 | $95.00 | WR75 x SMA(f) Adapter | 1 |
| SYSTRON DONNER | DBFA-210-8.03 | $35.00 | WR75 Straight Section, 8.03 inches length | 1 |
| SYSTRON DONNER | DBFA-440A-50 | $75.00 | WR75 50 dB Fixed Attenuator | 1 |
| SYSTRON DONNER | DBFA-480A | $175.00 | WR75 Isolator, 20 dB, 10-15 GHz | 2 |
| SYSTRON DONNER | DBFA-675-03 | $300.00 | WR75 Directional Coupler, 3 dB coupling | 1 |
| TDK | 9317.2 | $85.00 | WR75 Isolator, 20 dB, 10.4-12.7 GHz, 1 inch length | 1 |
| TECHNICRAFT | TR-605062-7 | $25.00 | WR75 Straight Section, 1-1/2 inches length | 18 |
| TECHNICRAFT | TR-605063-5 | $35.00 | WR75 Straight Section, 7-1/2 inches length | 9 |
| TECHNICRAFT | TR-605063-7 | $35.00 | WR75 Straight Section, 8-1/4 inches length | 30 |
| TECHNICRAFT | TR-605079 | $30.00 | WR75 Termination, 2 Watts, VSWR <1.5 | 25 |
| VARIAN | 11 GHz HPFL | $90.00 | WR75 11.0 GHz High Pass Filter, 2 inches length | 1 |
| VARIAN | WR75 isolator | $200.00 | WR75 High Power Isolator, 20 dB, 12.0-14.5 GHz, 100 Watt load | 1 |
| WAVEGUIDE ENG. | 75-62 | $85.00 | WR75 x WR62 Taper Section, 3.75 inches length | 1 |
| WAVELINE | 70349 | $85.00 | WR62 x WR75 Taper Section, 2.35 inches length | 1 |
| WAVELINE | 7501-APC7 | $95.00 | WR75 x APC7 Adapter | 1 |
| WAVELINE | 7506-03 | $75.00 | WR75 3 dB Fixed Attenuator | 4 |
| WAVELINE | 7506-40 | $75.00 | WR75 40 dB Fixed Attenuator | 1 |
| WAVELINE | 7508 | $250.00 | WR75 Variable Phase Shifter, 0-180 degrees, gage read | 3 |
| WAVELINE | 7510 | $185.00 | WR75 Level Set Attenuator, 0-40 dB, uncalibrated drive | 1 |
| WAVELINE | 7511 | $150.00 | WR75 Variable Attenuator, 0-30 dB, counter dial read | 3 |
| WAVELINE | 7512 | $195.00 | WR75 Variable Attenuator, 0-40 dB, gage read, 6.5" length | 1 |
| WAVELINE | 7522 | $450.00 | WR75 Direct Reading Precision Attenuator, 0-60 dB, 10-15 GHz | 7 |
| WAVELINE | 7533 | $45.00 | WR75 90 degree H-Plane Bend, cover/ choke flanges | 2 |
| WAVELINE | 7541-2 | $35.00 | WR75 Straight Section, 3 inches length | 3 |
| WAVELINE | 7542-06 | $35.00 | WR75 Straight Section, 6 inches length, cover/choke flanges | 3 |
| WAVELINE | 7554 | $125.00 | WR75 Termination, 2 Watts, 1.02 VSWR | 1 |
| WAVELINE | 7569-20 | $100.00 | WR75 4-Port Crossguide Coupler, 20 dB coupling | 6 |
| WAVELINE | 7570-40 | $110.00 | WR75 3-Port Crossguide Coupler, 40 dB coupling | 1 |
| WAVELINE | 7574-10 | $350.00 | WR75 Directional Coupler, 10 dB coupling | 1 |
| WAVELINE | 7574-20 | $350.00 | WR75 Directional Coupler, 20 dB coupling | 1 |
| WAVELINE | 7578-E | $175.00 | WR75 4-Port Manual Transfer Switch, E-Plane switching | 1 |
| WAVELINE | 7579-E | $225.00 | WR75 4-Port Manual or Motor Driven Switch, 24 VDC, E-Plane sw. | 1 |
| WAVELINE | 7584 | $275.00 | WR75 Liquid Cooled Load, 3 kW avg./1 gpm min.; 350 kW pk/30 PSI | 2 |
| WAVELINE | 7585 | $50.00 | WR75 H-Plane (Shunt) Tee | 1 |
| WAVELINE | 90893 | $375.00 | WR75 Dual Directional Coupler, 30 dB fwd arm/ 10 dB refl arm,19" | 1 |
| WAVELINE | 90959-3 | $300.00 | WR75 Directional Coupler, 3 dB coupling | 6 |
