ASK*--PLEASE CONTACT US
| MANUFACTURER |
MODEL |
PRICE |
DESCRIPTION |
QUANTITY |
| | | | WR90 WAVEGUIDE: 8.2-12.4 GHz | |
| 3 dBm | 10182292-1 | $60.00 | CPR90 Level Set Attenuator, 0-25 dB, uncalibrated drive | 7 |
| 3 dBm | X-352 | $45.00 | WR90 H-Plane (Shunt) Tee | 1 |
| 3 dBm, INC. | J215-XJ170 | $300.00 | WR90 High Power Load, 2 kW average/ 290 kW peak, 19 in. length | 2 |
| AERTECH | AWI8012-2 | $100.00 | WR90 Isoadapter, 20 dB isolation, 8.2-12.4 GHz,SMAf in/ WR90 out | 2 |
| AERTECH | W812BR | $50.00 | WR90 Tunnel Diode Detector, positive polarity, 8.2-12.4 GHz | ASK* |
| AIRTRON | 2068600 | $150.00 | WR90 Load, 150 Watts average/ 290 kW peak | 1 |
| AIRTRON | 453324 | $85.00 | WR90 Circulator, 20 dB, 9.5-10.5 GHz, choke flanges | 1 |
| AIRTRON | AT19B090N18.0 | $90.00 | CPR90 Flexible Waveguide, 18 inches length, grooved flanges | 4 |
| AIRTRON | TS64-4B-18N | $100.00 | WR90 Jacketed Flex Waveguide Section, 18 in. length,cover/choke | 4 |
| ANDREW | 55437-90 | $60.00 | CPR90 (grooved flange) x CMR90 (flat flange) Adapter, 4 in.*NEW* | 13 |
| ARRA | 90-463 | $85.00 | WR90 x APC7 Adapter | 2 |
| ARRA | AW1829B | $185.00 | CPR90 Directional Coupler, 10 dB coupling, N(f) coupled arm | 2 |
| ARRA | X600-20 | $85.00 | WR90 4-Port Crossguide Coupler, 20 dB coupling | 1 |
| BENDIX | WXA-007 | $50.00 | WR90 Loop Coupler, 30 dB coupling to SMA(f), 1 inch insertion | 4 |
| CASCADE RESEARCH | HF-8089 | $135.00 | WR90 Isolator, 25 dB, 8.2-12.4 GHz, 10 Watts maximum | 1 |
| CENCO | Phase Shifter | $50.00 | WR90 Variable Phase Shifter, 0-360 degrees | 1 |
| CMT | RA90-N-F | $85.00 | WR90 x N(f) Adapter | 1 |
| CMT | RBCC90SMAF20 | $200.00 | WR90 Directional Coupler, 20 dB coupling, SMA(f) coupled port | 1 |
| DEMORNAY BONARDI | DBG-274-6 | $40.00 | WR90 90 degree Twist Section, 6 inches length | 2 |
| DEMORNAY BONARDI | DBG-313 | $75.00 | WR90 Tunable Detector | ASK* |
| DEMORNAY BONARDI | DBG-460 | $200.00 | WR90 Load, 600 Watts average / 300 kW peak | 1 |
| DEMORNAY BONARDI | DBG-461 | $200.00 | WR90 Load, 600 Watts average / 300 kW peak | 1 |
| DEMORNAY BONARDI | DBG-620 | $45.00 | WR90 H-Plane (Shunt) Tee | 1 |
| DEMORNAY BONARDI | DBG-650 | $85.00 | WR90 Hybrid Tee | 2 |
| DEMORNAY BONARDI | DBG-710-3 | $200.00 | WR90 Direct Reading Freq. Meter, transmission type, 0.08% acc. | 1 |
| DEMORNAY BONARDI | DBG-915-1 | $135.00 | WR90 Variable Phase Shifter, 0-180 degrees, gage read | ASK* |
| DEMORNAY BONARDI | DBG-919 | $100.00 | WR90 Slide Screw Tuner, vernier read drives | 1 |
| DEMORNAY BONARDI | DBG-X-198 | $200.00 | WR90 Phase Shifter, 0-360 deg., 10 deg. res., 1 dB ins. loss | 1 |
| DEMORNAY BONARDI | DBG-X-487-1 | $45.00 | WR90 Directional Coupler, 10 dB, 8.8-9.8 GHz, 5-1/4 inch length | ASK* |
| DEMORNAY BONARDI | DBG-X-487-2 | $45.00 | WR90 Dir. Cplr., 10 dB, 8.8-9.8 GHz, SMA(f) thru-line output | ASK* |
| DEMORNAY BONARDI | DBG-X-487-3 | $45.00 | WR90 Dir. Cplr., 10 dB, 8.8-9.8 GHz, SMA(f) coupled port output | ASK* |
| DIAMOND ANTENNA | 3-830 | $135.00 | WR90 Directional Coupler, 3 dB coupling | 3 |
| DOUGLAS MICROWAVE | P161X | $45.00 | WR90 Crystal Detector, triple stub tuned | ASK* |
| E&M LABS | X967LI | $95.00 | WR90 Isolator, 40 dB, 8.5-11.5 GHz | 1 |
| FERROCOM | 9052-SFO | $90.00 | WR90 Isoadapter, 20 dB, 8.2-12.4 GHz, WR90 in/ SMA(f) out | 6 |
| FERROTEC | I-409-L | $75.00 | WR90 Isolator, 30 dB isolation, 10-11 GHz | 1 |
| FXR/MICROLAB | WE-C24 | $200.00 | WR90 (choke flange) High Power Load, 500 Watts average/350 kW pk | 1 |
| FXR/MICROLAB | WF-0055 | $235.00 | WR90 High Power Load, 500 Watts average/ 290 kW peak | 1 |
| FXR/MICROLAB | WG-0055 | $235.00 | WR90 High Power Load, 500 Watts average/ 290 kW peak | 2 |
| FXR/MICROLAB | X155A | $100.00 | WR90 Direct Reading Variable Attenuator, 0-20 dB, 2 Watt max. | 7 |
| FXR/MICROLAB | X311S | $100.00 | WR90 Slide Screw Tuner, vernier read drives | 1 |
| FXR/MICROLAB | X312A | $150.00 | WR90 E-H Plane Tuner, vernier drives | 1 |
| FXR/MICROLAB | X410B | $235.00 | WR90 Direct Reading Frequency Meter, 0.08% accuracy | 1 |
| FXR/MICROLAB | X411A | $185.00 | WR90 Direct Reading Frequency Meter, 0.08% accuracy | 1 |
| FXR/MICROLAB | X501B | $75.00 | WR90 Low Power Termination, VSWR <1.03, 3 Watts max. | 2 |
| FXR/MICROLAB | X501C | $85.00 | WR90 Low Power Termination, VSWR <1.015, 3 Watts max. | 2 |
| FXR/MICROLAB | X502A | $95.00 | WR90 Sliding Load, VSWR <1.01, 1/2 Watt max. | 1 |
| FXR/MICROLAB | X510D | $135.00 | WR90 Standard Mismatch, 1.20 VSWR | ASK* |
| FXR/MICROLAB | X510E | $135.00 | WR90 Standard Mismatch, 1.50 VSWR | ASK* |
| FXR/MICROLAB | X610B | $135.00 | WR90 Directional Coupler, 6 dB coupling | 3 |
| FXR/MICROLAB | X610C | $135.00 | WR90 Directional Coupler, 10 dB coupling | 5 |
| FXR/MICROLAB | X612D | $85.00 | WR90 4-Port Crossguide Coupler, 20 dB coupling | 4 |
| FXR/MICROLAB | X620A | $45.00 | WR90 E-Plane (series) Tee | 1 |
| FXR/MICROLAB | X621A | $45.00 | WR90 H-Plane (shunt) Tee | 1 |
| FXR/MICROLAB | X622A | $85.00 | WR90 Hybrid Tee | 1 |
| FXR/MICROLAB | X624B | $40.00 | WR90 90 degree H-Plane Bend | 1 |
| FXR/MICROLAB | X630B | $150.00 | WR90 Adjustable Short, micrometer drive | 2 |
| FXR/MICROLAB | X630C | $150.00 | WR90 Adjustable Short, micrometer drive | 1 |
| FXR/MICROLAB | X638S | $85.00 | WR90 Pickup Horn, 10 dBi gain mid-band, 2 inches length | 2 |
| FXR/MICROLAB | X641A | $150.00 | WR90 DPDT Transfer Switch, manually operated | 2 |
| GABRIEL | CPR90G 36" FLEX | $150.00 | CPR90 (grooved flanges) 36 inch Flexible Waveguide Section | 1 |
| GENERAL DYNAMICS | 16U2092-5 | $235.00 | WR90 High Power Load, 700 Watts average, 115VAC fan cooled | 1 |
| GENERAL MICROWAVE | X411 | $75.00 | WR90 Tunable Detector | ASK* |
| GENERIC | WR90 11.5G BPF | $45.00 | WR90 Bandpass Filter, 11.45-11.55 GHz, 2 inches length | 1 |
| GENERIC | WR90 27.5" | $65.00 | WR90 Straight Section, 27-1/2 inches length, brass | 1 |
| GENERIC | WR90 sidewall | $100.00 | WR90 Short Body Sidewall Dir.Coupler, 20 dB, 8.2-10.6 GHz, 9 in. | 1 |
| GENERIC | WR90 SS Tuner | $50.00 | WR90 Short Body Slide Screw Tuner, 2-3/4 inches length,stainless | 1 |
| GOLDSTAR | 641-001 | $85.00 | WR90 Circulator, 20 dB isolation, 8.2-10.2 GHz | 1 |
| HP/AGILENT | 11521A | $100.00 | WR90 Single Ended Mixer | 3 |
| HP/AGILENT | 8735A | $195.00 | WR90 PIN Modulator, 35 dB isolation, <4 dB ins.loss, 30 nS Tr | 1 |
| HP/AGILENT | 8735B | $295.00 | WR90 PIN Modulator, 80 dB isolation, <5 dB ins.loss, 30 nS Tr | 4 |
| HP/AGILENT | X281A | $95.00 | WR90 x N(f) Adapter, VSWR 1.25 | 17 |
| HP/AGILENT | X281B | $95.00 | WR90 x APC7 Adapter, VSWR 1.25 | 3 |
| HP/AGILENT | X281B-013 | $95.00 | WR90 x N(f) Adapter, VSWR 1.25 | 8 |
| HP/AGILENT | X281C | $295.00 | WR90 x APC7 Adapter, VSWR 1.05 | 10 |
| HP/AGILENT | X281C-012 | $295.00 | WR90 x N(m) Adapter, VSWR 1.05 | 1 |
| HP/AGILENT | X281C-013 | $295.00 | WR90 x N(f) Adapter, VSWR 1.05 | 5 |
| HP/AGILENT | X362A | $235.00 | WR90 Low Pass Filter, 16 GHz (-30 dB) cutoff | 1 |
| HP/AGILENT | X370A | $85.00 | WR90 Fixed Attenuator, 3 dB, 1 Watt maximum | 2 |
| HP/AGILENT | X370B | $85.00 | WR90 Fixed Attenuator, 6 dB, 1 Watt maximum | 2 |
| HP/AGILENT | X370D | $85.00 | WR90 Fixed Attenuator, 20 dB, 1 Watt maximum | 1 |
| HP/AGILENT | X372C | $135.00 | WR90 Precision Fixed Attenuator, 10 dB | 3 |
| HP/AGILENT | X372D | $135.00 | WR90 Precision Fixed Attenuator, 20 dB | 1 |
| HP/AGILENT | X375A | $150.00 | WR90 Direct Reading Variable Attenuator, 0-20 dB, 1 Watt max. | 6 |
| HP/AGILENT | X382A | $300.00 | WR90 Precision Direct Reading Attenuator, 0-50 dB | 7 |
| HP/AGILENT | X421A | $85.00 | WR90 Crystal Detector, negative polarity | 8 |
| HP/AGILENT | X424A | $125.00 | WR90 Crystal Detector, negative polarity | 9 |
| HP/AGILENT | X424A-002 | $150.00 | WR90 Crystal Detector, neg. pol., with matched load | 1 |
| HP/AGILENT | X424A-K12 | $250.00 | WR90 Planar Doped Barrier Diode Detector, negative polarity | 4 |
| HP/AGILENT | X485B | $125.00 | WR90 Tunable Detector Mount, neg. polarity, uncalibrated drive | 6 |
| HP/AGILENT | X486A | $225.00 | WR90 Thermistor Mount, for HP 432 series power meters | 3 |
| HP/AGILENT | X530A | $85.00 | WR90 Calibrated Tuned Cavity Freq. Meter, 0.1% accuracy | 2 |
| HP/AGILENT | X532A | $185.00 | WR90 Direct Reading Frequency Meter, 0.08% accuracy | 1 |
| HP/AGILENT | X532B | $200.00 | WR90 Direct Reading Frequency Meter, 0.08% accuracy | 16 |
| HP/AGILENT | X750D | $95.00 | WR90 4-Port Crossguide Coupler, 20 dB coupling | 2 |
| HP/AGILENT | X750E | $95.00 | WR90 4-Port Crossguide Coupler, 30 dB coupling | 1 |
| HP/AGILENT | X752A | $200.00 | WR90 Directional Coupler, 3 dB coupling | 2 |
| HP/AGILENT | X752C | $200.00 | WR90 Directional Coupler, 10 dB coupling | 14 |
| HP/AGILENT | X752C(CMR) | $200.00 | CMR90 Directional Coupler, 10 dB coupling | 3 |
| HP/AGILENT | X752D | $200.00 | WR90 Directional Coupler, 20 dB coupling | 3 |
| HP/AGILENT | X845A | $85.00 | WR90 Hybrid Tee | 2 |
| HP/AGILENT | X870A | $150.00 | WR90 Slide Screw Tuner, vernier read | 17 |
| HP/AGILENT | X880A | $165.00 | WR90 E-H Plane Tuner, uncalibrated drives | 8 |
| HP/AGILENT | X885A | $400.00 | WR90 Direct Reading Phase Shifter, 0-360 degrees | 6 |
| HP/AGILENT | X910B | $135.00 | WR90 Termination, 1/2 Watt, 1.015 VSWR | 13 |
| HP/AGILENT | X914A | $95.00 | WR90 Moving Load | 2 |
| HP/AGILENT | X914B | $150.00 | WR90 Moving Load, 1 Watt, SWR=1.01 | 13 |
| HP/AGILENT | X916B | $150.00 | WR90 Standard Reflection, 1.11 VSWR / .05 reflection coefficient | 1 |
| HP/AGILENT | X920A | $150.00 | WR90 Adjustable Short, uncalibrated drive | 6 |
| HP/AGILENT | X923A | $150.00 | WR90 Sliding Short, uncalibrated rod drive | 1 |
| HP/AGILENT | X930A | $95.00 | WR90 Shorting Switch | 1 |
| KEARFOTT | C-9941 | $35.00 | WR90 Isolator, 20 dB, 8.2-9.2 GHz | 6 |
| KEVLIN MICROWAVE | 1179B | $175.00 | WR90 Rotary Joint, 8.2-12.4 GHz, straight config., 4.5" length | 1 |
| LECTRONIC | LRL-511 | $35.00 | WR90 E-Plane (series) Tee, 3 inches length | 1 |
| LIEDER | LD-90-45 | $90.00 | WR90 Dual Arm Terminated Crossguide Coupler, two 45dB SMAf ports | ASK* |
| LORCH | LOX-326A | $125.00 | WR90 4-Port Dual Transfer Switch, 24 VDC coil | ASK* |
| M.C.S. | CS-2341-D | $200.00 | WR90 Half-Height Waveguide Directional Coupler, 20 dB coupling | 1 |
| M.C.S. | X-274 | $75.00 | WR90 Switchable Attenuator, 0 or 40 dB | ASK* |
| M.C.S. | X-305 | $125.00 | WR90 Slide Screw Tuner, vernier read | 1 |
| M.C.S. | X362A | $125.00 | WR90 Directional Coupler, 3 dB coupling | ASK* |
| M.C.S. | X362B | $125.00 | WR90 Directional Coupler, 10 dB coupling | 1 |
| M.C.S. | X-402 | $125.00 | WR90 DPDT Dual Transfer Switch, manual operation | ASK* |
| M/A-COM | 2000-6256-00 | $95.00 | WR90 x SMA(f) Adapter | 1 |
| M2 GLOBAL: | 089-080444 | $60.00 | CPR90 x WR90 Flange Adapter, 1-3/4 inches length, brass | 1 |
| MAURY MICROWAVE | X151 | $50.00 | WR90 H-Plane (Shunt) Tee | 2 |
| MAURY MICROWAVE | X200B2 | $185.00 | WR90 x 3.5mm(m) Adapter, 1.05 VSWR | 1 |
| MAURY MICROWAVE | X209D2 | $195.00 | WR90 x APC7 Adapter, 1.05 VSWR | 2 |
| MAURY MICROWAVE | X230K1 | $185.00 | WR90 x NMD 3.5mm End Launch Adapter, for HP 8510/ 8720/ PNA | 1 |
| MAURY MICROWAVE | X320D | $185.00 | WR90 Standard Mismatch, 1.20 VSWR | 1 |
| MAURY MICROWAVE | X320E | $185.00 | WR90 Standard Mismatch, 1.50 VSWR | 1 |
| MAURY MICROWAVE | X347A | $150.00 | WR90 Adjustable Short, vernier drive | 1 |
| MCCI WIRELESS | 16A3ST-36 | $65.00 | WR90 Straight Section, 36 inches length, choke/cover flanges | 2 |
| MCCI WIRELESS | T560-00 | $30.00 | WR90 Pressurization Section, 3/8 inch NPT inlet, 6.5 in. length | 1 |
| MDL | 90AC859 | $85.00 | WR90 x SMA(f) Adapter | 2 |
| MDL | 90CT106-1F | $135.00 | WR90 Short Body 10 dB Dir.Coupler, directivity 25 dB, 7.75 in. | 2 |
| MDL | 90CT116-1E | $135.00 | WR90 Short Body 20 dB Dir.Coupler, directivity 25 dB, 7.25 in. | 1 |
| MDL | 90CT86-1E | $135.00 | WR90 Short Body 3 dB Dir. Coupler, directivity 30 dB, 9.25 in. | 2 |
| MDL | 90FC176-1 | $95.00 | WR90 Short Body 18 dB Dir.Coupler, directivity 25 dB, 10 inches | 2 |
| MDL | 90FC29-1 | $90.00 | WR90 Directional Coupler, 17 dB coupling, N(f) coupled port | ASK* |
| MDL | 90T1C | $85.00 | WR90 Matched Hybrid Tee | 1 |
| MDL | 90XT326-5E | $85.00 | WR90 3-Port Crossguide Coupler, 20 dB coupling | 1 |
| MDL | 90XT346-1E | $85.00 | WR90 3-Port Crossguide Coupler, 40 dB coupling | 1 |
| MDL | 90XT426-9E | $85.00 | WR90 4-Port Crossguide Coupler, 20 dB coupling, choke flanges | 1 |
| MDL | A90E016-1E | $85.00 | WR90 Full Height (0.90x0.40) to Half Height (0.90x0.20) Taper,2" | 1 |
| MDP | ATC-52/70 | $150.00 | WR90 Direct Reading Variable Attenuator, 0-70 dB | 1 |
| MICROWAVE ASSOC. | 54000-90016 | $85.00 | WR90 (choke flange) x N(f) Adapter | 1 |
| MICROWAVE ASSOC. | MA-1160L-5003 | $45.00 | WR90 Isolator, 20 dB, 8.4-9.0 GHz, cover/choke flanges | 3 |
| MICROWAVE ASSOC. | MA-536A | $45.00 | WR90 Crystal Detector, negative polarity | ASK* |
| MICROWAVE ASSOC. | MA-541 | $85.00 | WR90 Matched Hybrid Tee | 2 |
| MICROWAVE ASSOC. | MA-636 | $35.00 | WR90 90 degree H-Plane Bend | 3 |
| MICROWAVE ENG. | TR64C-022 | $85.00 | WR90 x TNC(f) Adapter, with 1/2" NPT pressurization port *NEW* | 15 |
| MICROWAVE RESEARCH | 10050M | $85.00 | CMR90 x N(f) Adapter | 1 |
| MICROWAVE RESEARCH | M226 | $85.00 | WR90 x SMA(f) Adapter | 1 |
| MICROWAVE RESEARCH | X200-20 | $150.00 | WR90 Dual Directional Coupler, 20 dB coupling | ASK* |
| MICROWAVE RESEARCH | X40-3B | $85.00 | WR90 x SMA(f) Adapter | 2 |
| MICROWAVE RESEARCH | X40L-7A-SP | $85.00 | WR90 x APC7 Adapter | 2 |
| MICROWAVE RESEARCH | X71-120 | $175.00 | WR90 Harmonic Absorptive Filter, >30 dB stopband 14.1-16.2 GHz | 1 |
| MILITARY | 90 deg. SHORT | $65.00 | WR90 1/4 Wavelength Short at 9 GHz, 12.15650mm depth, gold flash | 1 |
| MILITARY | CG-176/AP | $50.00 | WR90 Short Body Sidewall Coupler,20 dB,9-10 GHz, Nf coupled port | 1 |
| MILITARY | SMC-52-4004 | $85.00 | WR90 Directional Coupler, 6 dB coupling | ASK* |
| MITEC | M0926-07-03 | $95.00 | CMR90 x N(f) Adapter | 2 |
| NARDA | 1030 | $300.00 | WR90 Dual Directional Broadwall Coupler, 20 dB coupling | 1 |
| NARDA | 1070-20 | $200.00 | WR90 Directional Coupler, 20 dB coupling | 3 |
| NARDA | 1080 | $300.00 | WR90 Sidewall Directional Coupler, 40 dB coupling | 1 |
| NARDA | 2338 | $200.00 | WR90 Direct Reading Frequency Meter, 2 MHz counter resolution | 1 |
| NARDA | 320B | $240.00 | WR90 High Power Load, 500 Watts average/ 290 kW peak *UNUSED* | 29 |
| NARDA | 350H | $40.00 | WR90 90 degree H-Plane Bend | 1 |
| NARDA | 410-10 | $125.00 | WR90 Standard Reflection, 1.22 VSWR / 0.1 reflection coefficient | 1 |
| NARDA | 4601 | $95.00 | WR90 x SMA(f) Adapter | 15 |
| NARDA | 47X1 | $50.00 | WR90 Level Set Attenuator | ASK* |
| NARDA | 510 | $85.00 | WR90 Tunable Detector | 2 |
| NARDA | 601A | $95.00 | WR90 x N(f) Adapter | 2 |
| NARDA | 720-06 | $65.00 | WR90 Fixed Attenuator, 6 dB | 1 |
| NARDA | 720-10 | $65.00 | WR90 Fixed Attenuator, 10 dB | 1 |
| NARDA | 730 | $100.00 | WR90 Variable Attenuator, 0.5-20 dB, vernier reading | 4 |
| NARDA | 730S | $60.00 | WR90 Level Set Attenuator, 0.5-25 dB, uncalibrated drive | 2 |
| NARDA | 930 | $45.00 | WR90 H-Plane (Shunt) Tee | 2 |
| NDL | X601 | $150.00 | WR90 E-H Plane Tuner, micrometer drives | 1 |
| OMEGA LABS | 318B | $150.00 | WR90 Directional Coupler, 6 dB coupling | 1 |
| OMNI-SPECTRA | 2000-6264-00 | $95.00 | WR90 choke flange x SMA(f) Adapter | 1 |
| OMNI-SPECTRA | 20186/P | $95.00 | WR90 x SMA(m) Adapter | 1 |
| OMNI-SPECTRA | 3001-6254-00 | $85.00 | WR90 x TNC(f) Adapter | 2 |
| P&H LABS | C2-X13322 | $75.00 | WR90 Isoadapter, 18 dB isol., 8.4-12.0 GHz, SMA(f)-in/ WR90 out | 1 |
| PENN ENGINEERING | 1442-1B | $85.00 | WR90 x SMA(f) Adapter | 1 |
| PRD | 1116 | $125.00 | WR90 Sliding Load | ASK* |
| PRD | 116-A | $65.00 | WR90 Low Power Termination, 1.05 VSWR | ASK* |
| PRD | 1203 | $165.00 | WR90 Isolator, 30 dB isolation, 8.2-12.4 GHz | 1 |
| PRD | 140-C | $65.00 | WR90 Fixed Attenuator, 10 dB | 3 |
| PRD | 159-A | $50.00 | WR90 Variable Attenuator, 0-20 dB, calibrated scale | ASK* |
| PRD | 159-B | $85.00 | WR90 Variable Attenuator, 0-40 dB, calibrated scale | 2 |
| PRD | 303-A | $50.00 | WR90 Slide Screw Tuner, uncalibrated / lockable drives | 1 |
| PRD | 402 | $50.00 | WR90 Sidewall Directional Coupler, 20 dB, 8.5-9.6 GHz, 9" length | ASK* |
| PRD | 408-S | $135.00 | WR90 Directional Coupler, 10 dB coupling | 3 |
| PRD | 464 | $45.00 | WR90 E-Plane (Series) Tee | 1 |
| PREMIER MICROWAVE | D41X5 | $165.00 | WR90 Isolator, 30 dB, 8.2-12.4 GHz, 10 Watts maximum | 1 |
| RANTEC | WX404 | $75.00 | WR90 to Dual Waveguide (H-Plane parallel) Taper & Polarizer | 2 |
| RAYTHEON | 10109000 | $85.00 | CMR90 3-port Crossguide Coupler, 8 dB coupling, choke flanges | ASK* |
| RAYTHEON | 3547518 | $85.00 | WR90 Circulator, 20 dB isolation, 8.7-10.7 GHz | 2 |
| RAYTHEON | CXM-27 | $60.00 | WR90 Circulator, 20 dB isolation, 10.1-10.5 GHz | 1 |
| SAGE LABS | W12MA | $135.00 | WR90 Low Pass Filter, >40 dB rejection above 17 GHz | 3 |
| SCIENTIFIC ATLANTA | 12-8.2 &11A | $550.00 | WR90 Standard Gain Horn, 22.1 dBi mid-band,w/ 11A-8.2 Nf adapter | 1 |
| SIVERS LAB | 7240X | $175.00 | WR90 Directional Coupler, 3 dB coupling, directivity 40 dB | 1 |
| SIVERS LAB | PM-7101-X | $250.00 | WR90 Precision Direct Reading Attenuator, 0-60 dB | ASK* |
| SIVERS LAB | PM-7220-X | $85.00 | WR90 Termination, 1 Watt, 1.03 VSWR | 2 |
| SIVERS LAB | PM-7307-X | $150.00 | WR90 4-Position 4-Port Switch, manually operated | ASK* |
| SIVERS LAB | SL-5600/61 | $135.00 | WR90 4-Position 4-Port Switch, manually operated | 2 |
| SIVERS LAB | SL-7844 | $150.00 | WR90 Rotary Joint, S-shape, 8.2-12.4 GHz | 1 |
| SPERRY | 134 | $75.00 | WR90 Direct Reading Variable Attenuator, 0-20 dB | ASK* |
| SPERRY | 354 | $75.00 | WR90 Sliding Load | ASK* |
| SYSTRON DONNER | DBG-310 | $50.00 | WR90 Crystal Detector, negative polarity | ASK* |
| SYSTRON DONNER | DBG-440A-06 | $60.00 | WR90 Fixed Attenuator, 6 dB | ASK* |
| SYSTRON DONNER | DBG-440A-10 | $60.00 | WR90 Fixed Attenuator, 10 dB | 1 |
| SYSTRON DONNER | DBG-440A-40 | $60.00 | WR90 Fixed Attenuator, 40 dB | 1 |
| SYSTRON DONNER | DBG-440F-07 | $60.00 | WR90 Fixed Attenuator, 7 dB | ASK* |
| SYSTRON DONNER | DBG-614-1 | $100.00 | WR90 SPDT Manual Switch | 1 |
| SYSTRON DONNER | DBG-630-20 | $85.00 | WR90 4-Port Crossguide Coupler, 20 dB coupling | 2 |
| SYSTRON DONNER | DBG-631-30 | $95.00 | WR90 3-port Crossguide Coupler, 30 dB coupling, choke flanges | 1 |
| SYSTRON DONNER | DBG-631-40 | $95.00 | WR90 3-Port Crossguide Coupler, 40 dB coupling | 1 |
| SYSTRON DONNER | DBG-642-20 | $150.00 | WR90 Crossguide Dual Dir. Coupler, 20 dB, N(f) coupled ports | 2 |
| SYSTRON DONNER | DBG-675-13 | $150.00 | WR90 Directional Coupler, 13 dB coupling | 1 |
| SYSTRON DONNER | DBG-S-385 | $150.00 | 20mm dia. Circular Waveguide High Power Load, 300 Watts average | 3 |
| TECHNICRAFT | TSG45318 | $35.00 | WR90 Jacketed Flex Section, 6 inches length, cover/choke flanges | ASK* |
| VARIAN | VSX-9011LP | $115.00 | WR90 Varactor Tuned Gunn Osc., 8.95-9.5 GHz, +17 dBm | 1 |
| WAVELINE | 601-NF | $95.00 | WR90 x N(f) Adapter | 6 |
| WAVELINE | 601-TNCF | $85.00 | WR90 x TNC(f) Adapter | 2 |
| WAVELINE | 601-WLM | $95.00 | WR90 x SMA(f) Adapter | 4 |
| WAVELINE | 60554 | $60.00 | WR90 Fixed Attenuator, 16 dB | ASK* |
| WAVELINE | 60563 | $135.00 | WR90 Directional Coupler, 10 dB coupling | ASK* |
| WAVELINE | 606-10 | $60.00 | WR90 Fixed Attenuator, 10 dB | 2 |
| WAVELINE | 609 | $60.00 | WR90 Adjustable Attenuator, 0.5-30 dB, uncalibrated, locking | 4 |
| WAVELINE | 61000 | $85.00 | WR90 (choke flange) x SMA(f) Adapter | 2 |
| WAVELINE | 611 | $100.00 | WR90 Variable Attenuator, 0-30 dB, vernier read | 3 |
| WAVELINE | 61163 | $95.00 | CMR90 x N(f) Adapter | 7 |
| WAVELINE | 612-DR | $150.00 | WR90 Variable Attenuator, 0-40 dB, gage read, 6.5" length | 2 |
| WAVELINE | 613 | $50.00 | WR90 Level Set Attenuator, 0-20 dB, uncalibrated drive | 3 |
| WAVELINE | 614 | $45.00 | WR90 Semi-Tunable Diode Mount, for 1N23, BNC(f) output | 1 |
| WAVELINE | 615 | $75.00 | WR90 Tunable Diode Mount, for 1N23, BNC(f) output | ASK* |
| WAVELINE | 616 | $35.00 | WR90 Fixed Diode Mount, for 1N23, BNC(f) output | ASK* |
| WAVELINE | 61667 | $325.00 | WR90 Directional Coupler, 50 dB coupling, directivity 40 dB | 1 |
| WAVELINE | 617 | $40.00 | WR90 Broadband Diode Mount, for 1N23, BNC(f) output | 1 |
| WAVELINE | 622 | $295.00 | WR90 Direct Reading Precision Attenuator, 0-60 dB | 2 |
| WAVELINE | 622-R | $295.00 | WR90 Panel Mounting Direct Reading Attenuator, 0-60 dB | 1 |
| WAVELINE | 633 | $35.00 | WR90 90 degree H-Plane Bend, cover/choke flanges | 2 |
| WAVELINE | 633-2 | $35.00 | WR90 90 degree H-Plane Bend | ASK* |
| WAVELINE | 635-2 | $25.00 | WR90 90 degree E-Plane Mitered Elbow, assymetrical, 1 in. offset | ASK* |
| WAVELINE | 639-2 | $35.00 | WR90 45 degree H-Plane Bend | 5 |
| WAVELINE | 642-06 | $45.00 | WR90 Straight Section, 6 inches length, choke flanges | 1 |
| WAVELINE | 642-2-06 | $45.00 | WR90 Straight Section, 6 inches length | 1 |
| WAVELINE | 643-2-12 | $65.00 | WR90 Straight Section, 12 inches length | 3 |
| WAVELINE | 653 | $95.00 | WR90 Sliding Load, uncalibrated drive, 2 W maximum, 1.02 VSWR | 1 |
| WAVELINE | 654 | $95.00 | WR90 Low Power Termination, 2 watts, 1.02 VSWR | 1 |
| WAVELINE | 657 | $85.00 | WR90 Hybrid Tee | 2 |
| WAVELINE | 658 | $85.00 | WR90 Matched Hybrid Tee | 3 |
| WAVELINE | 660 | $135.00 | WR90 E-H Plane Tuner, uncalibrated drives | 1 |
| WAVELINE | 667 | $50.00 | WR90 Pressurization Section,two 3/8"NPT inlets, one 0-30PSI gage | 2 |
| WAVELINE | 669-20 | $85.00 | WR90 4-Port Crossguide Coupler, 20 dB coupling | 1 |
| WAVELINE | 670-20 | $90.00 | WR90/ CPR90 3-port Crossguide Coupler, 20 dB coupling | 3 |
| WAVELINE | 673-10 | $250.00 | WR90 Ultra-Flat Directional Coupler, 10 dB coupling | 2 |
| WAVELINE | 673-20 | $250.00 | WR90 Ultra-Flat Directional Coupler, 20 dB coupling | 1 |
| WAVELINE | 673-30 | $250.00 | WR90 Ultra-Flat Directional Coupler, 30 dB coupling | 1 |
| WAVELINE | 674-10 | $200.00 | WR90 Directional Coupler, 10 dB coupling | 3 |
| WAVELINE | 678-E | $125.00 | WR90 2-Position 4-Port Switch, manually operated | 4 |
| WAVELINE | 680 | $50.00 | WR90 Shorting Switch | 1 |
| WAVELINE | 682 | $200.00 | WR90 Load, 500 Watts average / 290 kW peak | 3 |
| WAVELINE | 683CMR | $150.00 | CMR90 Slide Screw Tuner | 1 |
| WAVELINE | 688 | $375.00 | WR90 High Power Load, 2.5 kW average, forced air cooled, 115VAC | 1 |
| WAVELINE | 690-2 | $40.00 | WR90 90 degree Twist Section, 6 inches length | 1 |
| WAVELINE | 691-2 | $45.00 | WR90 45 degree Twist Section, 6 inches length | 4 |
| WAVELINE | 699 | $185.00 | WR90 Standard Gain Horn, 15 dBi gain mid-band | 1 |
| WAVELINE | 794-B | $95.00 | WR90 x WR62 Taper Section, 4 inches length | 1 |
| | | | WR102 WAVEGUIDE: 7.5-11.0 GHz | |
| ARISTA | 22761 | $95.00 | WR102 x SMA(f) Adapter | 2 |
| CMT | RBC102-10-1A1A | $200.00 | WR102 Directional Coupler, 10 dB coupling *UNUSED* | 2 |
| CMT | RFG102-7.5 | $50.00 | WR102 Jacketed Flexible Section, 7-1/2 inches length | 1 |
| DEMORNAY BONARDI | DBGA-057 | $95.00 | WR102 x SMA(f) Adapter | 1 |
| DEMORNAY BONARDI | DBGA-675-10 | $200.00 | WR102 Directional Coupler, 10 dB coupling | 1 |
| GENERAL INSTRUMENT | 3409-0007 | $90.00 | WR102 Variable Attenuator, 0-20 dB | 2 |
| GENERAL INSTRUMENT | 3464-0001-01 | $125.00 | WR102 DPDT Transfer Switch | 2 |
| GENERAL INSTRUMENT | 3477-0001-01 | $75.00 | WR102 Crystal Detector | 5 |
| GENERAL INSTRUMENT | 801-1822 | $35.00 | WR102 E-plane 90 degree elbow, choke flanges | 3 |
| GENERAL INSTRUMENT | 801-183 | $85.00 | WR102 Flexible Waveguide Section, 17.2 inches length, choke fl's | 3 |
| GENERAL INSTRUMENT | 801-9015 | $95.00 | WR102 x N(m) Adapter, choke flange | 6 |
| GENERAL INSTRUMENT | 801-9022 | $150.00 | WR102 Directional Coupler, 6 dB coupling, choke flages | 3 |
| GENERAL INSTRUMENT | 801-9024 | $150.00 | WR102 Directional Coupler, 10 dB coupling, choke flanges | 3 |
| GUIDE MICROWAVE | 1980-000 | $165.00 | WR102 DPDT Transfer Switch, 24 VDC, failsafe *UNUSED* | 4 |
| MCS | B-8906-3 | $95.00 | WR102 xSMA(f) Adapter | 1 |
| MDL | 102AC106 | $95.00 | WR102 x N(f) Adapter | 1 |
| MDL | 102CT86 | $175.00 | WR102 Directional Coupler, 10 dB coupling | 1 |
| PAMTECH | XHG1020 | $175.00 | WR102 Isolator, 25 dB, 7.5-11.0 GHz | 1 |
| PREMIER MICROWAVE | 2225A | $45.00 | WR102 90 degree E-Plane Bend, integral pressure window | 2 |
| SYSTRON DONNER | SD-102760026 | $95.00 | WR102 x SMA(f) Adapter | 2 |
| TECHNICRAFT | TS665022 | $50.00 | WR102 Unjacketed Flexible Section, 6 inches length *UNUSED* | 18 |
| | | | WR112 WAVEGUIDE: 7.05-10.0 GHz | |
| 3 dBm | CPR112-NFP | $95.00 | CPR112 grooved flange x N(f) Adapter | 15 |
| AERTECH | AMF-5891-1 | $60.00 | WR112 Isoadapter, 20 dB, 7.05-8.5 GHz,WR112 choke fl.in/SMAf out | ASK* |
| AERTECH | AMF-5891-2 | $60.00 | WR112 Isoadapter, 20 dB, 7.05-8.5 GHz,SMAf in/WR112 choke fl.out | ASK* |
| AERTECH | KC-7501 | $75.00 | WR112 Signal Sampler, two SMAf ports -30 dB, 2 inches,choke fl's | 5 |
| ANDREW | 48988-112L | $375.00 | CPR112 Hybrid Tee Reflectometer, 7.12-8.5 GHz, 60 dB directivity | 1 |
| ANDREW | 55402-112 | $60.00 | CPR112 / CMR112 90 degree E-Plane Bend, grooved flanges | 1 |
| ANDREW | 55675-112 | $35.00 | WR112 Pressurization Section,5/8" thick,3/8" inlet, cover/choke | 2 |
| ANDREW | C112-CNSG | $135.00 | CPR112 x N(f) Adapter | 1 |
| ANDREW | C112NCG | $95.00 | CPR112 grooved flange x N(f) Adapter | 2 |
| ANDREW | F112PB00240KS | $150.00 | WR112 Jacketed Flexible Section, 24 in. length, cover/choke *NEW | 2 |
| ANDREW | H112PC04 | $65.00 | CPRG112 90 degree H-Plane Bend, grooved flanges *NEW* | 20 |
| APOLLO MICROWAVES | 16002 | $195.00 | CPR112 7.9-8.4 GHz Harmonic Suppression Filter,-80 dB 15.8-16.8G | 3 |
| APPLIED MW.DYNAMICS | 511335A | $95.00 | WR112 Bandpass Filter, 8.12-8.16 GHz, 10-5/8 in. length | 10 |
| APPLIED MW.DYNAMICS | 511336 | $95.00 | WR112 Bandpass Filter, 8.33-8.37 GHz, 10-3/8 in. length | 15 |
| APPLIED MW.DYNAMICS | 511385B | $95.00 | WR112 Bandpass Filter, 8.12-8.17 GHz, 8 in. length | 7 |
| APPLIED MW.DYNAMICS | 511385C | $95.00 | WR112 Bandpass Filter, 8.08-8.13 GHz, 8 in. length | 1 |
| ARRA | CPR112G-460B | $95.00 | CPR112 (grooved flange) x N(f) Adapter | 2 |
| ARRA | R112G-460B | $95.00 | CPR112 grooved flange x N(f) Adapter | 1 |
| ARRA | WG136P | $95.00 | CMR112 x SMA(f) Adapter | 2 |
| ATLANTIC MICROWAVE | 01012875 | $45.00 | CPR112 90 degree mitre H-Plane Bend | 1 |
| ATLANTIC MICROWAVE | AMC-1089 | $125.00 | WR112 Dual Directional Crossguide Cplr.,45& 55 dB arms, int.term | 7 |
| CASCADE RESEARCH | HF-8004 | $195.00 | WR112 Isolator, 30 dB, 7.05-10.0 GHz | 1 |
| CMT | RBC-112-50-1A | $275.00 | WR112 Directional Coupler, 50 dB coupling | 1 |
| CMT | RHB112 | $45.00 | WR112 Assymetrical 90 degree H-Plane Mitre Bend, 1.38"x2.75"legs | 1 |
| CMT | RS112-10B10B-16 | $75.00 | CPR112 Straight Section, 16 inches length, grooved flanges | 1 |
| DEMORNAY BONARDI | DBGH-018 | $85.00 | WR112 x WR90 Taper Section, choke/choke flanges, 3-3/4 inches | 2 |
| DEMORNAY BONARDI | DBH-313 | $100.00 | WR112 Tunable Detector, positive polarity | 2 |
| DEMORNAY BONARDI | DBH-480 | $165.00 | WR112 Isolator, 30 dB, 7.05-10.0 GHz | 1 |
| DEMORNAY BONARDI | DBH-919 | $125.00 | WR112 Slide Screw Tuner, vernier read | 1 |
| DEMORNAY BONARDI | DBJH-018 | $90.00 | WR112 x WR137 Taper Section, 4-1/2 inches length | 1 |
| DOUGLAS MICROWAVE | 172B-30 | $135.00 | WR112 Sidewall Directional Coupler, 30 dB, 8-10 GHz, >20 dB dir. | 1 |
| E&M LABS | XL976LI | $150.00 | WR112 Isolator, 20 dB, 7.05-10.0 GHz | 1 |
| FLANN MICROWAVE | 1504 | $90.00 | WR112 Termination, 1 Watt | 1 |
| FXR/MICROLAB | W155A | $100.00 | WR112 Direct Reading Variable Attenuator, 0-20 dB | 1 |
| FXR/MICROLAB | W157A | $150.00 | WR112 Isolator, 25 dB, 7.05-10.0 GHz | 1 |
| FXR/MICROLAB | W168D | $75.00 | WR112 Fixed Attenuator, 20 dB, 1 Watt maximum | 2 |
| FXR/MICROLAB | W175A-10 | $90.00 | WR112 Precision Fixed Attenuator, 10 dB, 8 Watts maximum | 1 |
| FXR/MICROLAB | W311A | $125.00 | WR112 Slide Screw Tuner, vernier read | 1 |
| FXR/MICROLAB | W502A | $165.00 | WR112 Moving Load, uncalibrated drive | 1 |
| FXR/MICROLAB | W610A | $185.00 | WR112 Direct Reading Frequency Meter, 7-10 GHz | 1 |
| FXR/MICROLAB | W610C | $175.00 | WR112 Directional Coupler, 10 dB coupling | 5 |
| FXR/MICROLAB | W610D | $150.00 | WR112 Directional Coupler, 20 dB coupling | 1 |
| FXR/MICROLAB | W612D | $125.00 | WR112 4-Port Crossguide Coupler, 20 dB coupling | 2 |
| FXR/MICROLAB | W623B | $45.00 | WR112 90 degree E-Plane Bend | 1 |
| FXR/MICROLAB | W638A | $245.00 | WR112 Standard Gain Horn, 18 dBi gain mid-band | 1 |
| FXR/MICROLAB | WG-0050 | $225.00 | WR112 Medium Power Termination, 600 watts average/ 460 kW peak | 1 |
| FXR/MICROLAB | WL-0050 | $275.00 | WR112 Liquid Cooled Load, 4 kW average/2.75 MW peak, 2 gpm | 3 |
| GENERIC | 30dB CROSSGUIDE | $95.00 | WR112 4-Port Crossguide Coupler, 30 dB coupling | 1 |
| GENERIC | CPR112 3" | $45.00 | CPR112 Straight Section, 3 inches length | 2 |
| HERLEY | 88725 | $90.00 | WR112 SPDT Switch, 24 VDC | ASK* |
| HNL, INC. | 01-6426-01 | $185.00 | WR112 Dual Dir. Crossguide Coupler, 57 dB, SMA(f) cpld,cov/choke | 4 |
| HNL, INC. | 22690A | $65.00 | WR112 Straight Section, 11.25 inches length, cover/choke flanges | 1 |
| HNL, INC. | 26844A | $50.00 | WR112 Jacketed Flexible Section, 3.9 inches length, cover/choke | 4 |
| HP/AGILENT | H281A | $95.00 | WR112 x N(f) Adapter | 22 |
| HP/AGILENT | H370A | $90.00 | WR112 Fixed Attenuator, 3 dB, 1 Watt maximum | 1 |
| HP/AGILENT | H375A | $150.00 | WR112 Direct Reading Variable Attenuator, 0-20 dB, 1 Watt max. | 5 |
| HP/AGILENT | H382A | $350.00 | WR112 Precision Direct Reading Attenuator, 0-50 dB | 8 |
| HP/AGILENT | H421A | $90.00 | WR112 Crystal Detector, negative polarity | 5 |
| HP/AGILENT | H424A | $125.00 | WR112 Crystal Detector, negative polarity | 4 |
| HP/AGILENT | H424A-002 | $150.00 | WR112 Crystal Detector, negative pol., matched load option | 4 |
| HP/AGILENT | H485B | $135.00 | WR112 Tunable Detector Mount, neg. polarity, uncalibrated drive | 1 |
| HP/AGILENT | H486A | $225.00 | WR112 Thermistor Mount, for HP 432 series power meters | 1 |
| HP/AGILENT | H532A | $200.00 | WR112 Direct Reading Frequency Meter, 0.1% accuracy | 9 |
| HP/AGILENT | H752A | $225.00 | WR112 Directional Coupler, 3 dB coupling | 7 |
| HP/AGILENT | H752C | $225.00 | WR112 Directional Coupler, 10 dB coupling | 1 |
| HP/AGILENT | H752D | $225.00 | WR112 Directional Coupler, 20 dB coupling | 9 |
| HP/AGILENT | H870A | $150.00 | WR112 Slide Screw Tuner, vernier read | 4 |
| HP/AGILENT | H910A | $135.00 | WR112 Termination, 1 Watt | 8 |
| HP/AGILENT | H914A | $200.00 | WR112 Moving Load, uncalibrated drive | 2 |
| HP/AGILENT | H920A | $175.00 | WR112 Adjustable Short, uncalibrated drive | 1 |
| HP/AGILENT | HX292B | $125.00 | WR112 x WR90 Waveguide Taper | 19 |
| JUNCTION DEVICES | 12AHT | $95.00 | CPR112 x SMA(f) Adapter | 3 |
| K&L MICROWAVE | 511335-431 | $95.00 | WR112 Bandpass Filter, 7.89-7.94 GHz, 10-5/8 in. length | 4 |
| K&L MICROWAVE | 511335-432 | $95.00 | WR112 Bandpass Filter, 7.80-7.85 GHz, 10-5/8 in. length | 2 |
| K&L MICROWAVE | 511335-436 | $95.00 | WR112 Bandpass Filter, 7.76-7.81 GHz, 10-5/8 in. length | 1 |
| K&L MICROWAVE | 511335-439 | $95.00 | WR112 Bandpass Filter, 7.73-7.78 GHz, 10-5/8 in. length | 1 |
| K&L MICROWAVE | 511336-435 | $95.00 | WR112 Bandpass Filter, 7.92-7.97 GHz, 10-5/8 in. length | 2 |
| KEARFOTT | C994103010 | $175.00 | WR112 Isolator, 30 dB, 7.05-10.0 GHz, 10 Watts maximum | 1 |
| LIEDER DEVELOPMENT | 01011209-00 | $85.00 | CPR112 Magic Tee, 8 GHz | 1 |
| LOGUS | LM112BQL2X68 | $195.00 | CPR112 Manual or Solenoid driven DPDT Switch, 28VDC | 1 |
| M/A-COM | 5758D4-S004 | $95.00 | WR112 Bandpass Filter, 8.32-8.37 GHz, 8 in. length | 5 |
| M/A-COM | 5758D4-S007 | $95.00 | WR112 Bandpass Filter, 8135-8147 MHz, 10-1/2 in. length | 2 |
| M/A-COM | J7915-S005 | $75.00 | WR112 Circulator, 30 dB isolation, 7.5-8.5 GHz | 2 |
| M/A-COM | J7915-S005d | $125.00 | WR112 Double Pass Circulator, 40 dB, 7.4-8.4 GHz | 1 |
| MARCONI | Y31-5753-02 | $95.00 | WR112 4-Port Crossguide Coupler, 51 dB, 7.05-8.50 GHz | 1 |
| MAURY MICROWAVE | H209D2 | $150.00 | WR112 x APC7 Adapter, VSWR <1.05 *UNUSED* | 1 |
| MAURY MICROWAVE | H750A | $200.00 | WR112 Isolator, 30 dB, 7.05-10.0 GHz | 2 |
| MAURY MICROWAVE | H750D (cmr) | $175.00 | CMR112 Isolator, 35 dB, 7.2-8.4 GHz, 20 Watts maximum | 8 |
| MDL | 112AC106-1E | $95.00 | CMR112 x N(f) Adapter | 1 |
| MDL | 112AC126-1F | $85.00 | WR112 x SMA(f) Adapter | 1 |
| MDL | 112CT116-1F | $150.00 | CMR112 or WR112 Short Body Dir. Cplr., 30 dB, 7.05-8.4 GHz | 1 |
| MICROTECH | 026844 | $50.00 | WR112 Jacketed Flexible Waveguide Section, 3.85 in., cover/choke | 2 |
| MICROTECH | E1496 | $95.00 | WR112 choke flange x N(f) Adapter | 2 |
| MICROTECH | MTPS112-CPRGN12B | $135.00 | CPR112 (grooved flanges) Jacketed Flexible Section, 12 in.length | 1 |
| MICROWAVE ASSOC. | 8K210 | $85.00 | WR112 Circulator, 25 dB isolation, 7.0-8.5 GHz | 1 |
| MICROWAVE ENG. | H40-562 | $95.00 | CPR112 grooved flange x N(f) Adapter | 2 |
| MITEC | M0926-06-03 | $95.00 | CMR112 x N(f) Adapter | 2 |
| MITEC | M0964-30 | $75.00 | WR112 Fixed Attenuator, 30 dB, 1 watt maximum | 2 |
| MW. DEVELOPMENT CO. | 45112-101 | $185.00 | CPR112 Dual Feed OMT with 0-360 deg. Variable pol., 7.1-8.4 GHz | 1 |
| M-WAVE DESIGN | 112SA1212 | $95.00 | CPR112 x SMA(f) End Launch Adapter | 1 |
| NARDA | 1211 | $225.00 | WR112 Isolator, 30 dB, 7.05-10.0 GHz, 20 Watts maximum | 1 |
| NARDA | 301 | $110.00 | WR112 Termination, 4 Watts max., VSWR 1.015 max. | 2 |
| NARDA | 611A | $95.00 | WR112 x N(f) Adapter | 1 |
| NARDA | 611B | $95.00 | WR112 choke flange x N(f) Adapter | 1 |
| NARDA | 731 | $125.00 | WR112 Variable Attenuator, 0.5-20 dB, vernier reading | 1 |
| NARDA | 751 | $75.00 | WR112 Level Set Attenuator, 0-40 dB, uncalibrated drive | 1 |
| OMEGA LABS | 237 | $45.00 | WR112 90 degree E-Plane Bend | 1 |
| P&H LABS | B3-H24312 | $175.00 | WR112 Circulator, 20 dB isolation, 7.05-10.0 GHz | 1 |
| PRD | 114-A | $85.00 | WR112 Termination, 1 Watt | 1 |
| PRD | 160-B | $100.00 | WR112 Level Set Attenuator, 0-40 dB, uncalibrated drive | ASK* |
| PRD | 355-AS1 | $85.00 | WR112 x N(f) Adapter | 3 |
| PRD | H233 | $40.00 | WR112 Slotted Line Section, for use with 232 carriage | ASK* |
| QUASAR | WR112 flex | $125.00 | WR112 Jacketed Flexible/ Twistable Section, 24 in. length,cov/ch | 1 |
| RANTEC | IXL-407 | $60.00 | WR112 Isolator, 30 dB, 7.05-7.55 GHz | ASK* |
| RAYTHEON | LXH-23 | $275.00 | WR112 Water Load, 16 gpm @ 150 PSI, 18.38 in. length | 1 |
| SECTOR MICROWAVE | SMH-3ML1-5 | $225.00 | CPR112 Manual or Motor operated DPDT Switch, 28V | 1 |
| SECTOR MICROWAVE | SMH-4CL1-P | $225.00 | WR112 Manual or Motor operated DPDT Switch, 28V, grooved fl. | 6 |
| SECTOR MICROWAVE | SMH-967 | $225.00 | WR112 Dual (vertically stacked) Manual/Motor DPDT Switch, 28V | 1 |
| SIVERS LAB | SL-7020/61 | $150.00 | WR112 4-Position 4-Port Switch, manually operated | 2 |
| SPERRY | 22H1 | $150.00 | WR112 Slide Screw Tuner, vernier read | ASK* |
| SPERRY | 34H1 | $100.00 | WR112 Tunable Detector, positive polarity | 2 |
| SPERRY | 42H1 | $85.00 | WR112 Termination, 1 Watt | 1 |
| SPERRY | D41H5 | $165.00 | WR112 Isolator, 25 dB, 7.05-10.0 GHz | 1 |
| STRUTHERS ELEC. | NU174B-60 | $275.00 | CPR112 Directional Coupler, 60 dB coupling, N(f) coupled port | 1 |
| STRUTHERS ELEC. | U174B-10 | $200.00 | CMR112 Directional Coupler, 10 dB coupling | 7 |
| SYSTRON DONNER | DBH-057-K | $95.00 | CPR112 x N(f) Adapter | 7 |
| SYSTRON DONNER | DBH-210-6 | $65.00 | CPR112 x WR112 (UG Flange) Adapter, 6 inches length | 1 |
| SYSTRON DONNER | DBH-675-10 | $175.00 | WR112 Directional Coupler, 10 dB coupling | 2 |
| TECHNICRAFT | CG-650/U | $90.00 | WR112 (choke flange) x WR90 (choke flange) Flex Section, 9.5 in. | 1 |
| WAVELINE | 501-NF | $95.00 | WR112 x N(f) Adapter | 2 |
| WAVELINE | 509 | $85.00 | WR112/ CMR112 Level Set Atten., 0.5-30 dB, uncalibrated drive | 1 |
| WAVELINE | 51284 | $100.00 | CPR112 x WR187 Taper Section, 6-1/8 inches lenth | 1 |
| WAVELINE | 522 | $325.00 | WR112 Precision Direct Reading Attenuator, 0-60 dB | 2 |
| WAVELINE | 533 | $45.00 | WR112 90 degree H-Plane Bend, cover/choke flanges | 1 |
| WAVELINE | 542-06 | $40.00 | WR112 Straight Section, 6 inches length, cover/choke flanges | 2 |
| WAVELINE | 543 | $60.00 | WR112 Straight Section, 12 inches length, cover/choke flanges | 1 |
| WAVELINE | 554 | $90.00 | WR112 Termination, 4 Watts, 1.02 VSWR | 2 |
| WAVELINE | 554 | $95.00 | WR112 Low Power Termination, 4 Watts maximum, 1.02 VSWR | 2 |
| WAVELINE | 570-20 | $125.00 | WR112 3-port Crossguide Coupler, 20 dB coupling | 1 |
| WAVELINE | 574-20 | $225.00 | WR112 Directional Coupler, 20 dB coupling | 1 |
| WAVELINE | 574-40 | $275.00 | WR112 Directional Coupler, 40 dB coupling | 1 |
| WAVELINE | 590-2 | $40.00 | WR112 90-degree Twist Section, 6 inch length | 2 |
| WAVELINE | 694--A | $85.00 | WR112 (choke flange) x WR90 (cover flange) Taper Section, 5 in. | 1 |
| WAVELINE | 694-D | $85.00 | WR112 (cover flange) x WR90 (choke flange) Taper Section, 5 in. | 2 |
| WAVELINE | 717667 | $225.00 | WR112 Dual Dir.Cplr.,10 dB coupling,directivity 35 dB,7.9-8.4GHz | 1 |
| WAVELINE | 912759 | $95.00 | WR112 3-Port Crossguide Coupler, 59 dB, 8-10 GHz, N(f) coupled | 1 |
| | | | WR137 WAVEGUIDE: 5.85-8.20 GHz | |
| 3 dBm | XC-170 | $95.00 | WR137 x WR90 Taper Section, 6 inches length | 2 |
| AIRTRON | 112-XC | $100.00 | WR137 4-Port Crossguide Coupler, 40 dB coupling | 1 |
| AIRTRON | CMR137-Nf | $85.00 | CMR137 x N(f) Adapter | 2 |
| ALCATEL | 402002776 | $85.00 | CMR137 Circulator, 23 dB isolation, 5.9-6.4 GHz | 24 |
| ALCATEL | 470117828 | $60.00 | CMR137 x SMA(f) End Launch Adapter, 5.9-6.4 GHz bandwidth | 9 |
| ANDREW | 39099-137A/55414 | $140.00 | CPR137 Low Power Termination, 1.06 VSWR, mounted in 4" straight | 1 |
| ANDREW | 55407-137-3 | $75.00 | CPRG137 90 degree Twist Section, 12 inches length | 2 |
| ANDREW | A137DEN | $65.00 | CPR137 x CMR137 Flange Adapter, 4 inches length | 3 |
| ANDREW | C137CNSG | $150.00 | CPR137 (grooved flange) x N(f) Adapter *NEW* | 7 |
| ANDREW | E137PC04 | $75.00 | CPR137 90 degree E-Plane Bend *NEW* | 6 |
| ANDREW | E306D | $45.00 | WR137 90 degree E-Plane Bend | 1 |
| ANDREW | F137CCS2 | $195.00 | CPR137 (grooved fl.) 24 inch Flexible-Twistable Waveguide *NEW* | 1 |
| ANDREW | H137PC04 | $75.00 | CPR137 90 degree H-Plane Bend *NEW* | 1 |
| ANDREW | H137PE04 | $75.00 | CMR137 90 degree H-Plane Bend *NEW* | 1 |
| APOLLO MICROWAVES | 10074-2 | $100.00 | CPR137 Lowpass Filter (waffle type), -30 dB at 9.8 GHz, 6 inches | 1 |
| APOLLO MICROWAVES | 16001 | $195.00 | CPR137 5.85-6.65GHz Harmonic Suppression Filter,-80dB 11.7-13.3G | 6 |
| APOLLO MICROWAVES | 27-1752B | $85.00 | Circulator-Adapter, 18 dB isol., TNC(m)-in/ CPR137-out/ SMA(m) | 1 |
| ARRA | 137-520-25T | $150.00 | WR137 Variable Attenuator, 0-25 dB, vernier drive | 1 |
| ARRA | 137-600A1130 | $100.00 | WR137 4-Port Crossguide Coupler, 30 dB coupling | 1 |
| ARRA | AR4012-1 | $95.00 | CMR137 x SMA(m) Adapter | 3 |
| ARRA | AW1616 | $145.00 | CPRG137 4-Port Crossguide Coupler, 50 dB, SMA(f) coupled ports | 1 |
| ARRA | CMR137-485B-5 | $95.00 | CMR137 Fixed Attenuator, 5 dB, 40 Watts average, 8.62 in. length | 1 |
| ARRA | CPR137G-462 | $135.00 | CPR137 (grooved flange) x SMA(f) Adapter | 1 |
| ATLANTIC MICROWAVE | A3192724 | $675.00 | CPR137 Cal.Kit: 2 Nf adapters,2 terminations,1/8 &3/8wave shorts | 3 |
| ATLANTIC MICROWAVE | CPR137 short set | $115.00 | CPR137 Offset Short Pair, 1/8 wave (6.83mm) & 3/8 wave (20.50mm) | 1 |
| CABLEWAVE SYSTEMS | TF12-137E | $115.00 | CPRG137 Twistable Flexible Waveguide Section, 12 in. length | 1 |
| CASWELL ELEC. | C-101-AX | $85.00 | CMR137 Isolator, 20 dB, 5.8-6.7 GHz, 3-1/2 inches length | 1 |
| CHANNEL MICROWAVE | LJ322 | $165.00 | WR137 Isolator, 18 dB, 6.25-6.50 GHz, 200 Watts max., choke fl's | 1 |
| CMT | RA137-7MM-13A | $150.00 | CPR137 x 7mm Adapter | 1 |
| CMT | RA137-7MM-16A | $150.00 | CPR137 (grooved flange) x 7mm Adapter | 2 |
| CMT | RA137-SMA-M | $95.00 | CMR137 x SMA(m) Adapter | 1 |
| DEMORNAY BONARDI | DBJ-210-3 | $25.00 | WR137 Straight Section, 3 inches length | 2 |
| DEMORNAY BONARDI | DBJ-224 | $45.00 | WR137 90 degree E-Plane Bend | 4 |
| DEMORNAY BONARDI | DBJ-274-10 | $60.00 | WR137 90 degree Twist Section, 19 inches length | 1 |
| DEMORNAY BONARDI | DBJ-480 | $185.00 | WR137 Isolator, 20 dB, 5.85-8.20 GHz | 1 |
| DEMORNAY BONARDI | DBJ-630-20 | $100.00 | WR137 4-Port Crossguide Coupler, 20 dB coupling | 1 |
| DEMORNAY BONARDI | DBJ-650 | $125.00 | WR137 Hybrid Tee | 1 |
| DEMORNAY BONARDI | DBJ-655 | $125.00 | WR137 Matched Hybrid Tee | 1 |
| DEMORNAY BONARDI | DBJ-919 | $150.00 | WR137 Slide Screw Tuner | 2 |
| DIAMOND ANTENNA | 6545 | $75.00 | WR137 Level Set Attenuator, 0-20 dB | 3 |
| FERROCOM | 277-0303-010 | $100.00 | WR137/CMR137 Circulator, 20 dB isolation, 5.4-7.0 GHz | 3 |
| FERROCOM | 277-0444-030 | $85.00 | CMR137 Circulator, 25 dB isolation, 5.8-7.2 GHz | 10 |
| FERROCOM | 609 | $85.00 | CMR137 Circulator, 20 dB, 5.925-6.425 GHz | 1 |
| FERROCOM | 6189-SFI | $50.00 | CMR137 Isoadapter, 5.925-6.425 GHz, SMA(f) input / CMR137 output | 2 |
| FERROTEC | G3711 | $65.00 | CMR137 Isolator, 20 dB, 6.1-6.7 GHz | 1 |
| FXR/MICROLAB | C155A | $115.00 | WR137 Direct Reading Variable Attenuator, 0-20 dB | 2 |
| FXR/MICROLAB | C510D | $150.00 | WR137 Standard Mismatch, VSWR 1.20 | 1 |
| FXR/MICROLAB | C614U | $125.00 | CMR137 Short Body Dir. Coupler, 20 dB, 5.8-6.5 GHz, 12 inches | 1 |
| FXR/MICROLAB | C622A | $125.00 | WR137 Hybrid Tee | 1 |
| FXR/MICROLAB | C623B | $45.00 | WR137 90 degree E-Plane Bend | 6 |
| FXR/MICROLAB | C624B | $45.00 | WR137 90 degree H-Plane Bend | 4 |
| FXR/MICROLAB | C630A | $150.00 | WR137 Sliding Short, vernier drive | 1 |
| GENERIC | CMR137 16" | $60.00 | CMR137 Straight Section, 16 inches length, brass | 3 |
| GENERIC | CMR137 E 90 | $45.00 | CMR137 90 degree E-Plane Bend | 1 |
| GENERIC | CMR137 flex | $40.00 | CMR137 Unjacketed Flexible Waveguide Section, 4.75 inches length | 1 |
| GENERIC | CMR137 x WR137 3" | $75.00 | CMR137 x WR137 (UG344 round flange) Flange Adapter, 3 inches | 1 |
| GENERIC | CMR137 x WR137 4" | $75.00 | CMR137 x WR137 (UG344 round flange) Flange Adapter, 4 inches | 1 |
| GENERIC | CMR137-Nf | $85.00 | CMR137 x N(f) Adapter | 1 |
| GENERIC | CPR137 x WR112 | $85.00 | CPR137 x WR112 Stepped Taper Transition, 1.5 inch length | 1 |
| GENERIC | WR137 1.0" | $20.00 | WR137 Straight Section, 1 inch length | 1 |
| GENERIC | WR137 1.62" | $20.00 | WR137 Straight Section, 1-5/8 inches length | 1 |
| GENERIC | WR137 lpfl | $75.00 | WR137 Low Pass Filter, 9.5 GHz cutoff, 8-1/8 inches length | 1 |
| GHZ TECHNOLOGIES | 20024R1 | $60.00 | CMR137 Straight Section, 12-1/2 inches length | 1 |
| HP/AGILENT | J281A | $95.00 | WR137 x N(f) Adapter | 22 |
| HP/AGILENT | J370A | $100.00 | WR137 Fixed Attenuator, 3 dB, 1 watt maximum | 1 |
| HP/AGILENT | J370D | $100.00 | WR137 Fixed Attenuator, 20 dB, 1 Watt maximum | 1 |
| HP/AGILENT | J375A | $175.00 | WR137 Direct Reading Variable Attenuator, 0-20 dB, 1 Watt max. | 6 |
| HP/AGILENT | J382A | $400.00 | WR137 Precision Direct Reading Attenuator, 0-50 dB | 3 |
| HP/AGILENT | J424A | $125.00 | WR137 Crystal Detector, negative polarity | 11 |
| HP/AGILENT | J424A-002 | $150.00 | WR137 Crystal Detector with matched load, negative polarity | 2 |
| HP/AGILENT | J485B | $150.00 | WR137 Tunable Detector Mount, neg. polarity, uncalibrated drive | 1 |
| HP/AGILENT | J486A | $250.00 | WR137 Thermistor Mount, for HP 432 series power meters | 4 |
| HP/AGILENT | J532A | $250.00 | WR137 Direct Reading Frequency Meter | 9 |
| HP/AGILENT | J750D | $150.00 | WR137 4-Port Crossguide Coupler, 20 dB coupling | 2 |
| HP/AGILENT | J750E | $150.00 | WR137 4-Port Crossguide Coupler, 30 dB coupling | 2 |
| HP/AGILENT | J752A | $395.00 | WR137 Directional Coupler, 3 dB coupling | 2 |
| HP/AGILENT | J870A | $175.00 | WR137 Slide Screw Tuner, vernier read | 6 |
| HP/AGILENT | J880A | $250.00 | WR137 E-H Plane Tuner, uncalibrated drives | 1 |
| HP/AGILENT | J885A | $450.00 | WR137 Direct Reading Phase Shifter, 0-360 degrees | 4 |
| HP/AGILENT | J910A | $150.00 | WR137 Termination, 1 Watt | 5 |
| HP/AGILENT | J914A | $225.00 | WR137 Moving Load, 1 Watt, uncalibrated drive | 5 |
| HP/AGILENT | J920A | $175.00 | WR137 Adjustable Short, uncalibrated drive | 6 |
| KEARFOTT | W277 | $75.00 | WR137 Isolator, 40 dB, 5.8-6.5 GHz | 1 |
| MAURY MICROWAVE | C229A | $125.00 | WR137/CMR137 x APC7 End Launch Adapter | 1 |
| MDL | 137FP219 | $100.00 | CPR137 Bandpass Filter, 7.18-7.77 GHz, -60 dB at 7.10& 7.89 GHz | 1 |
| MDL | 137XT26-3E-20P | $100.00 | WR137 4-Port Crossguide Coupler, 30 dB coupling | 1 |
| MDL | 137XT429 | $200.00 | CPR137 Dual Directional Crossguide Coupler,50 dB, SMA cpld ports | 1 |
| MICROWAVE ASSOC. | 64490039-001 | $95.00 | CMR137 x N(f) Adapter | 1 |
| MICROWAVE ASSOC. | 7K8Z6 | $65.00 | CMR137 Isoadapter, 20 dB, 5.6-7.5 GHz, SMA(m) input/ wg output | 1 |
| MICROWAVE ASSOC. | I-1395L | $75.00 | CMR137 Isolator, 20 dB, 5.9-6.5 GHz, 10 Watts maximum | 2 |
| MICROWAVE ASSOC. | J7911 | $100.00 | WR137/CMR137 Circulator, 20 dB isolation, 5.8-7.7 GHz | 1 |
| MICROWAVE ASSOC. | MA-909N | $95.00 | CMR137 x N(f) Adapter | 1 |
| MICROWAVE ASSOC. | MC4115-5 | $125.00 | CMR137 Dual Crossguide Coupler, both terminated arms 20 dB cpld. | 1 |
| MICROWAVE ASSOC. | MC9264 | $85.00 | CMR137 Isolator, 25 dB, 5.9-6.5 GHz, 10 Watts maximum | 1 |
| MITEC | CMR137 x 159 | $85.00 | CMR137 x CMR159 Taper Section, 6-1/4 inches length | 1 |
| MITEC | CPR137 twist | $50.00 | CPR137 90 degree Twist Section, 3 inches length, grooved flanges | 3 |
| MITEC | M0926-05-03 | $95.00 | CMR137 x N(f) Adapter | 4 |
| MITEC | MC1700-E-90 | $40.00 | CMR137 90 degree Mitre E-Plane Bend | 1 |
| MITEC | MC1700-H-90 | $45.00 | CMR137 90 degree H-Plane Mitre Bend | 2 |
| NARDA | 1012 | $125.00 | WR137 4-Port Crossguide Coupler, 20 dB coupling | 1 |
| NARDA | 352H | $45.00 | WR137 90 degree H-Plane Bend | 1 |
| NARDA | 612A | $95.00 | WR137 x N(f) Adapter | 4 |
| NARDA | 642 | $325.00 | WR137 Standard Gain Horn, 16.5 dBi gain mid-band | 2 |
| NARDA | 732 | $135.00 | WR137 Variable Attenuator, 0-20 dB, vernier dial | 1 |
| NARDA | 962 | $200.00 | WR137 E-H Plane Tuner, uncalibrated drives | 1 |
| NEICO MICROWAVE | 21821-1 | $65.00 | Half-Height WR137 x SMA(f) Adapter | 1 |
| OMEGA LABS | 296X5 | $295.00 | WR137 Sidewall Directional Coupler, 50 dB, SMA-f coupled port | 3 |
| OMEGA LABS | 316-C | $350.00 | CPR137 Directional Coupler, 10 dB coupling | 1 |
| OMEGA LABS | 706 | $95.00 | WR137 Low Power Termination | 2 |
| OMEGA LABS | 706 | $85.00 | WR137 x N(f) Adapter | 1 |
| OMNI-SPECTRA | 3000-6252-00 | $85.00 | WR137 x N(f) Adapter | 2 |
| PRD | 177-B | $135.00 | WR137 Variable Attenuator,arbitrary dial, 0-40 dB | 3 |
| PRD | 588-A | $150.00 | WR137 Direct Reading Frequency Meter | 1 |
| RAYTHEON | 560209-1 | $95.00 | CMR137 Directional Coupler, 3 dB coupling | 1 |
| RCA | 478191-1 | $75.00 | CMR137 Level Set Attenuator, 0-20 dB, uncalibrated drive, 6 in. | 1 |
| ROCKWELL | 341-10046P5 | $85.00 | CMR137 Termination, 5 Watts | 3 |
| SCIENTIC ATLANTA | 12-5.8 &11A | $550.00 | WR137 Standard Gain Horn, 22.1 dBi mid-band,w/11A-5.8 Nf adapter | 1 |
| SCIENTIFIC ATLANTA | 11A-5.8 | $95.00 | WR137 x N(f) Adapter | 1 |
| SECTOR MICROWAVE | SM3-4376 | $225.00 | CPR137 Manual or Motor operated DPDT Switch, -28VDC, grooved fl. | 1 |
| SECTOR MICROWAVE | SM3M-A4G | $225.00 | CPR137 Manual or Motor operated DPDT Switch, 28V, grooved fl. | 1 |
| SPECIALTY MICROWAVE | A137NXR-2-1 | $125.00 | CPR137 (grooved flange) x N(f) Adapter | 7 |
| STRUTHERS ELEC. | NU174A-60 | $295.00 | CPR137 Directional Coupler, 60 dB coupling, N(f) coupled port | 3 |
| SYLVANIA | FD-502 | $165.00 | WR137 Isolator, 20 dB, 5.85-8.20 GHz | 1 |
| SYSTRON DONNER | DBJ-057 | $85.00 | WR137 x N(f) Adapter | 2 |
| SYSTRON DONNER | DBJ-642-20 | $175.00 | WR137 Crossguide Dual Dir. Coupler, 20 dB, N(f) coupled ports | 1 |
| SYSTRON DONNER | DBJ-675-30 | $295.00 | WR137 Directional Coupler, 30 dB coupling | 1 |
| SYSTRON DONNER | DBJX-018-2/058-2 | $90.00 | WR137 to Quarter-Height Waveguide 6" Taper & SMA(f) Adapter | 1 |
| SYSTRON-DONNER | DBJ-272 | $50.00 | WR137 45 degree Twist Section, 10 inches length | 1 |
| UTE MICROWAVE | CWT-4270-WT | $375.00 | CPRG137 High Power Isolator,23 dB, 5.8-7.0 GHz,500W avg/3.5 kWpk | 3 |
| WAVELINE | 401-NF | $95.00 | WR137 x N(f) Adapter | 1 |
| WAVELINE | 412DR | $150.00 | WR137 Direct Reading Level Set Attenuator, 0-40 dB | 1 |
| WAVELINE | 41311 | $85.00 | CMR137 Low Power Termination, 5 Watts average | 2 |
| WAVELINE | 417 | $100.00 | WR137 Crystal Detector, negative polarity | 3 |
| WAVELINE | 422 | $375.00 | WR137 Direct Reading Precision Attenuator, 0-60 dB | 3 |
| WAVELINE | 432-2 | $45.00 | WR137 90 degree E-Plane Bend | 1 |
| WAVELINE | 438 | $45.00 | WR137 45 degree E-Plane Bend | 2 |
| WAVELINE | 462 | $100.00 | WR137 Moving Short, uncalibrated drive | 1 |
| WAVELINE | 467 | $35.00 | WR137 Pressurization Section, no meter provided | 1 |
| WAVELINE | 470-30 | $135.00 | WR137 3-Port Crossguide Coupler, 30 dB coupling | 3 |
| WAVELINE | 473-20 | $350.00 | WR137 Ultra-Flat Directional Coupler, 20 dB coupling | 2 |
| WAVELINE | 474-40 | $295.00 | WR137 Directional Coupler, 40 dB coupling | 1 |
| WAVELINE | 480 | $50.00 | WR137 Waveguide Shutter, 3-1/2 inches length | 1 |
| WAVELINE | 481 | $200.00 | WR137 Medium Power Load, 300 Watts average/ 710 kW peak | 1 |
| WAVELINE | 483 | $175.00 | WR137 Slide Screw Tuner | 2 |
| WAVELINE | 494-B | $90.00 | WR137 x WR187 Waveguide Taper, 6-1/2 in. length | 2 |
| WESTERN ELECTRIC | 640-2863 | $65.00 | CMR137 Termination, 4 Watts | 3 |
| WESTERN ELECTRIC | 640-2977-076 | $60.00 | CPR137 x CMR137 Flange Adapter, 2 inches length | 1 |
| WESTERN ELECTRIC | 769-3927-001 | $95.00 | CMR137 x N(f) Adapter | 2 |
| | | | CMR159 & CPR159 WAVEGUIDE: 4.90-7.05 GHz | |
| ANDREW | C159-ENSG | $135.00 | CMR159 x N(f) Adapter | 4 |
| ANDREW | E209K | $75.00 | CPR159 90 degree H-Plane Bend | 1 |
| APOLLO MICROWAVES | 12035 | $375.00 | CPR159 High Power Load, 2 kW average | 1 |
| ARRA | CPR159-920 | $225.00 | CPR159 Load, 1500 Watts average/ 1 MW peak | 1 |
| GABRIEL | WRFM-159-12 | $110.00 | CMR159 Flexible Waveguide Section, 12 inches length *NEW* | 12 |
| GENERIC | CPR137 x CPR159 | $60.00 | CPR137 (grooved flange) x CPR159 (grooved flange) Taper, 3 in. | 1 |
| GENERIC | CPR159 H 90 | $40.00 | CPR159 90 degree H-Plane Mitre Bend, aluminum | 1 |
| HP/AGILENT | 375A | $175.00 | CMR159 Direct Reading Variable Attenuator, 0-20 dB, 1 Watt max. | 1 |
| MAURY MICROWAVE | F314B | $150.00 | CPR159 Sliding Short, uncalibrated drive | 1 |
| MAURY MICROWAVE | SF3002B | $75.00 | CPR159 90 degree E-Plane Bend, cover/ choke flanges | 2 |
| MICROWAVE ENG. | D170FT-24-4-4N | $125.00 | CPR159 Jacketed Flexible Waveguide Section, 24 inches length | 1 |
| MICROWAVE RESEARCH | D40M-7A-SP | $95.00 | CMR159 x APC7 Adapter | 8 |
| MICROWAVE RESEARCH | D40M-NA | $95.00 | CMR159 x N(f) Adapter | 7 |
| MITEC | CMR159 E 90 | $45.00 | CMR159 90 degree E-Plane Bend | 1 |
| MITEC | CMR159 H 90 | $45.00 | CMR159 90 degree H-Plane Bend | 2 |
| MITEQ | M2557-4 | $135.00 | CPR187 Diplexer, 4.565-4.585/ 4.935-4.955 GHz, WR187 common port | 1 |
| NARDA | 159-343 | $95.00 | WR187 x CMR159 Taper Section, 3-1/2 inches length | 1 |
| OMEGA LABS | 285X6 | $150.00 | CPR159 3-Port Crossguide Coupler, 30 dB, N(f) coupled port | 4 |
| OMEGA LABS | 315-C | $350.00 | CMR159 Directional Coupler, 10 dB coupling | 1 |
| OMEGA LABS | 545-12-MP | $50.00 | CPR159 x CMR159 Flange Adapter, 12 in. length | 6 |
| OMEGA LABS | 545-3 | $50.00 | CPR159 (grooved flange) x CMR159 Flange Adapter, 3 in. length | 1 |
| OMEGA LABS | 545-3-MP | $50.00 | CPR159 x CMR159 Flange Adapter, 3 in. length | 5 |
| OMEGA LABS | 965 | $95.00 | CMR159 x APC7 Adapter | 1 |
| TECHNICRAFT | KS-1653201 | $45.00 | CMR159 Unjacketed Flexible Waveguide Section, 5-7/8 in. length | 1 |
| WAVEGUIDE ENG. | 125-1274-024-009 | $60.00 | CPR159 Straight Section, 26-3/4 inches length, aluminum | 1 |
| WAVEGUIDE ENG. | 125-1274-024-024 | $60.00 | CPR159 45 degree Twist Section. 26-7/8 inches length, aluminum | 1 |
| WAVEGUIDE ENG. | 1274-024-003 | $45.00 | CPR159 90 degree H-Plane Bend, aluminum | 1 |
| WAVELINE | 5922 | $400.00 | CMR159 Precision Direct Reading Attenuator, 0-60 dB | 4 |
| WAVELINE | 5932-CPRG | $60.00 | CPR159 90 degree E-Plane Bend, grooved flanges | 2 |
| WAVELINE | 5983 | $175.00 | WR159 Slide Screw Tuner, micrometer & vernier read | 1 |
| WAVELINE | 5994-C-CPRG | $135.00 | CPR159 (grooved flange) x CPR137 (grooved flange) Taper, 7.75in. | 1 |
| WESTERN ELECTRIC | 13E | $50.00 | CMR159 3-Port Crossguide Coupler, 10 dB coupling | 1 |
| WESTERN ELECTRIC | 1502H | $50.00 | CMR159 Band Pass Filter, 6012-6056 MHz, 4-5/8 inches length | 1 |
| WESTERN ELECTRIC | 1503AH | $50.00 | CMR159 Band Pass Filter, 6267-6304 MHz, 6-5/8 inches length | 1 |
| WESTERN ELECTRIC | 20B | $150.00 | CMR159 Variable Phase Shifter, 0-180 degrees | 2 |
| WESTERN ELECTRIC | 3A | $65.00 | CMR159 Magic Tee, split block construction | 4 |
| WESTERN ELECTRIC | 6A | $60.00 | CMR159 Isolator, 20 dB, 5.6-6.6 GHz | 1 |
| WESTERN ELECTRIC | A1 | $60.00 | CMR159 Isolator, 20 dB, 5.9-6.5 GHz | 1 |
| WESTERN ELECTRIC | ED-59586 | $35.00 | CMR159 Straight Section, 3 inches length | 1 |
| WESTERN ELECTRIC | KS-16486 | $200.00 | CMR159 Frequency Meter, 5.85-6.50 GHz, 1 MHz res., built-in det. | 1 |
| | | | WR187 WAVEGUIDE: 3.95-5.85 GHz | |
| 3 dBm | J-175 | $85.00 | WR187 x N(f) Adapter *NEW* | 9 |
| 3 dBm | J-215 | $185.00 | WR187 High Power Load, 500 Watts average | 2 |
| 3 dBm | XJ-170 | $95.00 | WR187 x WR90 Taper Section, 10 inches length | 1 |
| AIRCOM | 195-XC | $90.00 | WR187 x WR137 Taper Section, 9 inches length | 1 |
| ARRA | 187-421-2 | $60.00 | WR187 45 degree H-Plane Bend | 2 |
| CMT | 44-00164-101 | $150.00 | CPR187 4-Port Crossguide Coupler, 40 dB, SMA(f) coupled ports | 4 |
| CMT | RT187-1A1A90 | $65.00 | WR187 90 degree Twist Section, 9 inches length | 1 |
| DEMORNAY BONARDI | DBK-520-20 | $300.00 | WR187 Standard Gain Horn, 20 dBi gain mid-band | 2 |
| DEMORNAY BONARDI | DBK-630-20 | $150.00 | WR187 4-Port Crossguide Coupler, 20 dB coupling | 1 |
| DEMORNAY BONARDI | DBK-969 | $125.00 | WR187 Sliding Short, uncalibrated drive | 1 |
| DICO | 549/ 550 | $300.00 | WR187 Standard Gain Horn, 16.5 dBi gain mid-band,w/ N(f) adapter | 1 |
| E&M LABS | C110LI | $225.00 | WR187 Isolator, 30 dB, 3.95-5.85 GHz, 20 Watts maximum | 6 |
| FARINON | ISOADAPTER | $75.00 | WR187 input/ SMA(f) output Isoadapter, 25 dB isol., 4.5-5.85 GHz | 3 |
| FXR/MICROLAB | 601-D98 | $85.00 | WR187 x N(m) End Launch Adapter *UNUSED* | 20 |
| FXR/MICROLAB | H164A | $295.00 | WR187 Precision Direct Reading Attenuator, 0-50 dB | 1 |
| FXR/MICROLAB | H216A | $75.00 | WR187 Crystal Detector, negative polarity | 2 |
| FXR/MICROLAB | H501B | $110.00 | WR187 Termination, 5 Watts, 1.025 VSWR | 1 |
| FXR/MICROLAB | H601C | $85.00 | WR187 x N(f) Adapter | 2 |
| FXR/MICROLAB | H610A | $275.00 | WR187 Directional Coupler, 3 dB coupling | 1 |
| FXR/MICROLAB | H610C | $275.00 | WR187 Directional Coupler, 10 dB coupling | 3 |
| FXR/MICROLAB | H629B | $60.00 | WR187 45 degree H-Plane Bend | 1 |
| FXR/MICROLAB | WG-0035 | $295.00 | WR187 High Power Termination, 2.5 kW average / 7.75 MW peak | 2 |
| GENERIC | CMR187-Nf | $85.00 | CMR187 x N(f) Adapter | 1 |
| GENERIC | CPR187 x WR187 | $50.00 | CPR187 (grooved flange) x UG149A Flange Adapter, 1/2 inch thick | 3 |
| GENERIC | WR187 cg | $135.00 | WR187 3-Port Crossguide Coupler, 20 dB coupling | 1 |
| GHZ TECHNOLOGIES | GHZ-2055 | $65.00 | CPR187 x WR187 Flange Adapter, 4 inches length | 2 |
| HP/AGILENT | G281A | $95.00 | WR187 x N(f) Adapter | 11 |
| HP/AGILENT | G370B | $100.00 | WR187 Fixed Attenuator, 6 dB, 1 Watt maximum | 1 |
| HP/AGILENT | G370D | $100.00 | WR187 Fixed Attenuator, 20 dB, 1 Watt maximum | 1 |
| HP/AGILENT | G375A | $175.00 | WR187 Direct Reading Variable Attenuator, 0-20 dB, 1 Watt max. | 3 |
| HP/AGILENT | G382A | $600.00 | WR187 Precision Direct Reading Attenuator, 0-50 dB | 3 |
| HP/AGILENT | G424A | $135.00 | WR187 Crystal Detector, negative polarity | 8 |
| HP/AGILENT | G485B | $135.00 | WR187 Tunable Detector Mount, neg. polarity, uncalibrated drive | 1 |
| HP/AGILENT | G486A | $250.00 | WR187 Thermistor Mount, for HP 432 series power meters | 2 |
| HP/AGILENT | G532A | $250.00 | WR187 Direct Reading Frequency Meter, 0.11% accuracy | 8 |
| HP/AGILENT | G752A | $450.00 | WR187 Directional Coupler, 3 dB coupling | 3 |
| HP/AGILENT | G752C | $450.00 | WR187 Directional Coupler, 10 dB coupling | 5 |
| HP/AGILENT | G810B | $95.00 | WR187 Slotted Line Section | 2 |
| HP/AGILENT | G810B/809B/444A | $495.00 | WR187 Slotted Line with carriage and detector | 1 |
| HP/AGILENT | G870A | $185.00 | WR187 Slide Screw Tuner, vernier read | 4 |
| HP/AGILENT | G910A | $150.00 | WR187 Termination, 1 Watt, 1.02 VSWR | 6 |
| HP/AGILENT | G914A | $235.00 | WR187 Moving Load, uncalibrated drive | 3 |
| HP/AGILENT | G920A | $150.00 | WR187 Adjustable Short, uncalibrated drive | 5 |
| IMC MICROWAVE | JH83/20 | $225.00 | CPR187 Dual Dir. Coupler, 60 dB, N(f) coupled ports,13.38"length | 1 |
| JUNCTION DEVICES | R1C11 | $225.00 | WR187 Isolator, 30 dB, 3.95-5.85 GHz, 20 Watts maximum | 1 |
| K&L MICROWAVE | 7WP01-5150T100 | $100.00 | WR187 Bandpass Filter, 5.1-5.2 GHz, 11.5 in. length, aluminum | 1 |
| MAURY MICROWAVE | G344A | $50.00 | WR187 Flush Short Circuit Termination | 1 |
| MDL | 187AC189 | $95.00 | WR187 (choke flange) x SMA(f) Adapter | 3 |
| MDL | 187BE18-15P-2D | $60.00 | WR187 90 degree E-Plane Bend, cover/ choke flanges | 2 |
| MDL | 187BE18-30P-3D | $60.00 | WR187 90 degree E-Plane Bend, choke/ choke flanges | 4 |
| MDL | 187XT329 | $235.00 | CPR187 (grooved fl.) Dual Dir. Coupler, 50 dB, SMA(f) cpld.,7.2" | 1 |
| MDL | 187XT436-1D | $150.00 | WR187 4-Port Crossguide Coupler, 30 dB coupling | 1 |
| MICRO-RADIONICS | C-9931 | $60.00 | WR187 Isolator, 20 dB, 5.25-5.85 GHz | 2 |
| MICROTECH | 85E45-15-060A | $250.00 | WR187 60 inch Flexible Waveguide Section *NEW* | 1 |
| MICROWAVE ASSOC. | MA-735 | $85.00 | WR187 x N(f) Adapter | 1 |
| MITEC | F5186 | $75.00 | CPR187 90 degree Twist Section, 9 in. length, grooved/flat fl's | 2 |
| MITEC | M2397 | $350.00 | CPR187 High Power Load, 5 kW average with 200 cfm air required | 1 |
| MITEC | M2557-1 | $135.00 | CPR187 Diplexer, 4.765-4.785/ 4.865-4.885 GHz, WR187 common port | 1 |
| MITEC | M2557-3 | $135.00 | CPR187 Diplexer, 4.445-4.465/ 4.810-4.830 GHz, WR187 common port | 1 |
| MITEC | MO926-3-1 | $95.00 | CPR187 grooved flange x N(f) Adapter | 5 |
| M-W MICROWAVE | 2350011518 | $45.00 | CPR187 Straight Section, 2 inches length | 1 |
| MW. DEVELOPMENT CO. | 63187-164 | $95.00 | WR187 x SC(f) End Launch Adapter | 1 |
| MW. DEVELOPMENT CO. | 63187-188 | $125.00 | CMR187 x EIA-7/8 Adapter, with coax line pressurization inlet | 2 |
| MW. DEVELOPMENT CO. | 65187-127 | $60.00 | CMR187 x WR187 Flange Adapter/ 90 degree E-Plane Bend | 2 |
| NARDA | 1083 | $450.00 | WR187 Sidewall Directional Coupler, 40 dB coupling, dir. 35 dB | 1 |
| NARDA | 1213 | $185.00 | WR187 Isolator, 20 dB, 3.95-5.85 GHz, 20 Watts maximum | 1 |
| NARDA | 323B | $300.00 | WR187 High Power Load, 2 kW average/ 1 MW peak | 1 |
| NARDA | 359E | $60.00 | WR187 90 degree E-Plane Bend | 1 |
| NARDA | 513 | $95.00 | WR187 Tuneable Detector | 1 |
| NARDA | 613A | $95.00 | WR187 x N(f) Adapter | 2 |
| NARDA | 733 | $85.00 | WR187 Variable Attenuator, 0.5-20 dB, uncalibrated drive | 2 |
| OMEGA LABS | 314-C | $300.00 | WR187 Directional Coupler, 10 dB coupling | 1 |
| PRD | 201-A | $200.00 | WR187 Slotted Line with carriage and detector | 1 |
| RAYTHEON | CU-735/SPS-5C | $135.00 | WR187 3-port Crossguide Coupler, 20 dB coupling,N(f)coupled port | 1 |
| SCIENTIFIC ATLANTA | 23-3.9/4&6 | $100.00 | WR187 Dish Illumination Horn, approx. 8 dBi gain | 1 |
| SIVERS LAB | SL-5990/61B | $195.00 | WR187 4-Position 4-Port Switch, manually operated, 5-3/16"length | 1 |
| SPERRY | 105 | $110.00 | WR187 Termination, 2 Watts, 1.02 VSWR | 3 |
| SPERRY | 321 | $150.00 | WR187 3-Port Crossguide Coupler, 30 dB coupling | 1 |
| SPERRY | 322 | $150.00 | WR187 3-Port Crossguide Coupler, 40 dB coupling | 1 |
| SPERRY | 42C1 | $110.00 | WR187 Termination, 5 Watts, 1.02 VSWR | 1 |
| SYSTRON DONNER | DBK-642-20 | $195.00 | WR187 Crossguide Dual Dir. Coupler, 20 dB, N(f) coupled ports | 2 |
| THE FERRITE CO. | M3954/17-01 | $200.00 | WR187 Load, 2000 Watts average | 1 |
| WAVELINE | 322 | $400.00 | WR187 Precision Direct Reading Attenuator, 0-60 dB | 2 |
| WAVELINE | 332-2 | $60.00 | WR187 90 degree E-Plane Bend | 1 |
| WAVELINE | 353 | $165.00 | WR187 Moving Load, uncalibrated drive | 1 |
| WAVELINE | 354 | $125.00 | WR187 Termination, 6 Watts, 1.02 VSWR | 1 |
| WAVELINE | 360 | $250.00 | WR187 E-H Plane Tuner, uncalibrated drives | 2 |
| WAVELINE | 374-20 | $275.00 | WR187 Directional Coupler, 20 dB coupling | 1 |
| WAVELINE | 383 | $175.00 | WR187 Slide Screw Tuner, vernier read | 2 |
| WAVELINE | 51930 | $135.00 | WR187 x WR112 Taper Section, 10 inches length | 2 |
