ASK--PLEASE CONTACT US
| MANUFACTURER |
MODEL |
PRICE |
DESCRIPTION |
QUANTITY |
| | | | CMR229 & CPR229 WAVEGUIDE: 3.30-4.90 GHz | |
| ANDREW | 163950-229 | $125.00 | CPR229 (grooved flange) x N(f) Adapter | 1 |
| ANDREW | 19008-229 | $25.00 | WR229 Sliding Hanger Assembly *NEW* | 3 |
| ANDREW | 200814 | $125.00 | CPR229 (grooved lange) Termination, 10 Watts maximum, 1.10 VSWR | 2 |
| ANDREW | 49000-229F1 | $1,200.00 | CPR229 Hybrid Tee Reflectometer Test Set, 3.7-4.2 GHz,>60 dB dir | 1 |
| ANDREW | 55241-24 | $125.00 | CPR229 Flexible Waveguide Section, 24 in. length, grooved fl's | 2 |
| ANDREW | 62901-229 | $45.00 | CPR229 Straight Section, 5 inches length, grooved flanges | 2 |
| ANDREW | C229CNAG | $135.00 | CPR229 (grooved flange) x N(f) Adapter | 1 |
| ANDREW | F229PE01 | $135.00 | CMR229 Flexible / Twistable Jacketed Section, 18 in. length*NEW* | 7 |
| ANDREW | M229P-0E030-AN | $65.00 | CMR229 90 degree miter H-Plane Bend *NEW* | 9 |
| ANDREW | N229PE03-0E030 | $65.00 | CMR229 90 degree miter E-Plane Bend *NEW* | 7 |
| APOLLO MICROWAVES | 10351 | $100.00 | CPR229 (grooved flange) Termination, 10 Watts max., 1.15 VSWR | 1 |
| APOLLO MICROWAVES | 10508 | $95.00 | CMR229 x SMA(f) Adapter | 1 |
| APOLLO MICROWAVES | CMR229-SMAf | $95.00 | CMR229 x SMA(f) Adapter | 2 |
| ARRA | 1507 | $100.00 | CPR229 Low Power Termination, 2 Watts,with 20 dB Nf coupled port | 1 |
| ARRA | CMR229-460B | $95.00 | CMR229 x N(f) Adapter | 1 |
| ARRA | CPR229F-462 | $95.00 | CPR229 x SMA(f) Adapter, aluminum body | 6 |
| ARRA | CPR229F-462B | $95.00 | CPR229 x SMA(f) Adapter, brass body | 8 |
| ARRA | CPR229G-640A | $110.00 | CPR229 Low Power Termination, 10 Watts, 1.10 VSWR, grooved fl. | 3 |
| BOGART | 91954 | $90.00 | CMR229 Low Power Termination, 5 Watts | 1 |
| CALIF. MICROWAVE | TR43-CW112 | $85.00 | CMR229 x SMA(f) Adapter | 2 |
| CALIFORNIA MW. | 52-022231 | $95.00 | CMR229 x SMA(f) Adapter | 1 |
| CMT | MPTSL229-19A | $235.00 | CMR229 Medium Power Load, 750 Watts average | 2 |
| COM DEV LTD. | 10309-2 | $90.00 | CPR229 Low Pass Filter, 3.3-4.4 GHz passband, -30 dB at 4.95 GHz | 2 |
| COM DEV LTD. | SPT-50-1 | $500.00 | CPR229/CMR229 Directional Coupler, 10 dB coupling, 47 in. length | 1 |
| COMDEV LTD. | 10699-1 | $175.00 | CPR229 Circulator, 20 dB isolation, 3.3-4.3 GHz, grooved flanges | 4 |
| COMDEV LTD. | 20162 | $90.00 | CPR229 Low Power Termination, 5 Watts, 3 in. length | 2 |
| FARINON | 3742S1A | $85.00 | CMR229 Isoadapter,25 dB isol.,3.7-4.2 GHz,waveguide in/ SMAf out | 1 |
| FLANN MICROWAVE | 11A170 | $145.00 | CPR229 Low Power Termination, 4 Watts maximum, 1.10 VSWR | 1 |
| GARDINER | C-Band LNA | $100.00 | CPR229 LNA, 50 dB gain, 30 deg. noise temp., 3.7-4.2 GHz, 12V | ASK* |
| GENERAL ELECTRIC | 7733187P1 | $250.00 | CMR229 High Power Load, 1.5 kW average, 12 in. length | 2 |
| GENERIC | CMR229 6" | $40.00 | CMR229 Straight Section, 6 inches length | 1 |
| GENERIC | CMR229 6.75" | $40.00 | CMR229 Straight Section, 6-3/4 inches length | 1 |
| GENERIC | CMR229 isoadapt | $75.00 | CMR229 Isoadapter, 20 dB isolation, 3.3-4.5 GHz, N(f) input | 1 |
| GENERIC | CMR229 x SCf | $85.00 | CMR229 x SC(f) Adapter | 1 |
| GENERIC | CPR229 SHORT | $25.00 | CPR229 Shorting Plate | 1 |
| HP/AGILENT | 0950-0607 | $75.00 | CMR229 Isoadapter, 20 dB, 3.55-4.75 GHz, CMR229 in / N(f) out | 1 |
| M/A-COM | MA7Y045 | $85.00 | CMR229 Isoadapter, 20 dB, 3.5-4.5 GHz, waveguide in/ SMA(f) out | 1 |
| MAURY MICROWAVE | E209C1 | $150.00 | CPR/CMR 229 x APC7 Adapter, VSWR<1.10, drilled for both flanges | 1 |
| MAURY MICROWAVE | E313A | $225.00 | CPR229 Sliding Termination, uncalibrated drive | 1 |
| MICROWAVE ASSOC. | MC4181 | $85.00 | CPR229 4.3 GHz Low Pass Filter, 6.37 in. length, grooved flanges | 1 |
| MICROWAVE RESEARCH | B40M-7A-SP | $95.00 | CMR229 x APC7 Adapter | 6 |
| MICROWAVE RESEARCH | B40M-NA | $95.00 | CMR229 x N(f) Adapter | 13 |
| MICROWAVE RESEARCH | B80-LU | $110.00 | CMR229 Low Power Termination, 2 Watts | 1 |
| MITEC | M0907-2 | $150.00 | CPR229 Terminated Crossguide Coupler, 20 dB, N(f) coupled port | 1 |
| MITEC | M0926-02-03 | $95.00 | CMR229 x N(f) Adapter | 2 |
| MITEC | M0926-3 | $95.00 | CPR229 x N(f) Adapter | 1 |
| MITEC | M1096 | $235.00 | CMR229 Matched Hybrid Tee Splitter, one leg terminated, 2W input | 1 |
| MITEC | M1246-2-12-45-L11 | $85.00 | CPR229 45 degree Twist Section, 12 inches length,grooved flanges | 2 |
| NEICO MICROWAVE | 14623 | $200.00 | CMR229 Manual DPDT Transfer Switch | 1 |
| OMEGA LABS | 10001-165 | $95.00 | CMR229 x N(f) Adapter | 1 |
| OMEGA LABS | 313-C | $500.00 | CMR229 Directional Coupler, 10 dB coupling, 42 inches length | 2 |
| OMEGA LABS | 653 | $250.00 | CMR229 Moving Load, uncalibrated drive | 1 |
| SECTOR MICROWAVE | 2EGS | $275.00 | CPR229 DPDT Transfer Switch, +41 VDC actuator & manual override | 1 |
| SPECIALTY MICROWAVE | AA229N-1 | $95.00 | CPR229 x N(f) Adapter *NEW* | 34 |
| TECHNICRAFT | TFT-82008-36 | $125.00 | CMR229 Flexible Waveguide Section, 36 inches length | 1 |
| WAVELINE | 2922 | $650.00 | CMR229 Precision Direct Reading Attenuator, 0-60 dB | 4 |
| WAVELINE | 2959 | $400.00 | CMR229 E-H Plane Tuner, counter drives | 1 |
| WAVELINE | 2974-10 | $550.00 | CMR229 Directional Coupler, 10 dB coupling, 40 inches length | 2 |
| WAVELINE | 2979E | $350.00 | CPR/CMR229 Manual or Motor Driven DPDT E-Plane Switch | 1 |
| WAVELINE | 2983 | $250.00 | CMR229 Slide Screw Tuner, vernier read | ASK* |
| WAVELINE | 339540 | $40.00 | CMR229 Straight Section, 5 inches length | 1 |
| WAVELINE | 91440 | $250.00 | CMR229 Manual or Motor Driven DPDT Switch, 115 VAC | 1 |
| WESTERN ELECTRIC | 24A | $95.00 | CMR229 x N(f) Adapter | 2 |
| WESTERN ELECTRIC | 51A | $50.00 | CMR229 90 degree E-Plane Bend | ASK* |
| | | | WR284 WAVEGUIDE: 2.60-3.95 GHz | |
| AIRTRON | AF-2B-284-20 | $135.00 | WR284 Jacketed Flexible Waveguide Section, 20 inches length | 1 |
| ARRA | 284B-460 | $135.00 | WR284 x N(f) Adapter | 1 |
| ASTEX/ GERLING | GL405 | $225.00 | WR284 Quadruple Stub Tuner, 12 inches length | 1 |
| COLEMAN MICROWAVE | 502550M-revB | $500.00 | CPR284 Tunable BPFL, 2.7-2.9 GHz, 10 MHz 3 dB bw, 0.5dB loss,30" | 1 |
| DEMORNAY BONARDI | DBGL-018 | $150.00 | WR284 x WR90 Taper Section, 10 inches length | 1 |
| DEMORNAY BONARDI | DBL-234 | $90.00 | WR284 90 degree H-Plane Bend | 2 |
| DIAMOND ANTENNA | 449 | $425.00 | WR284 Standard Gain Horn, 16.5 dBi gain mid-band | 1 |
| DIAMOND ANTENNA | 450 | $135.00 | WR284 x N(f) Adapter | 1 |
| E&M LABS | S103LIA | $300.00 | WR284 Isolator, 20 dB, 2.60-3.95 GHz | 1 |
| FXR/MICROLAB | 164-A17 | $500.00 | CPR284 Precision Direct Reading Attenuator, 0-60 dB | 1 |
| FXR/MICROLAB | S164A | $475.00 | WR284 Precision Direct Reading Attenuator, 0-50 dB | 1 |
| FXR/MICROLAB | S311A | $225.00 | WR284 Slide Screw Tuner, micrometer read, 15-1/2 inches length | 2 |
| FXR/MICROLAB | S601B | $135.00 | WR284 x N(f) Adapter | 2 |
| FXR/MICROLAB | S624B | $90.00 | WR284 90 degree H-Plane Bend | 1 |
| FXR/MICROLAB | S638A | $500.00 | WR284 Standard Gain Horn, 18 dB gain mid-band | 1 |
| GENERIC | CPR229 X WR284 | $135.00 | CPR229 to WR284 Taper Section, 5-1/8 inches length | 1 |
| GENERIC | WR284 E 90 | $75.00 | WR284 90 degree E-Plane Mitre Bend | 1 |
| GENERIC | WR284 x CPR159 | $125.00 | WR284 (choke lange) x CPR159 (grooved flange) Taper, 6-1/2 in. | 1 |
| GENERIC | WR284-137 taper | $90.00 | WR284 x WR137 Taper Section, 7-3/8 inches length | 1 |
| GERLING APPL.ENG. | 912583 | $300.00 | CPR284 Sliding Short Circuit, counter drive, grooved flange | 2 |
| GERLING MOORE | 4027 | $195.00 | WR284 Triple Stub Tuner, 8 inches length | 1 |
| GERLING MOORE | 4076/ GL202 | $200.00 | WR284 Dual Directional Short Loop Coupler, 55 dB at 2.45 GHz, Nf | 1 |
| HP/AGILENT | S281A | $150.00 | WR284 x N(f) Adapter | 1 |
| HP/AGILENT | S281A (modified) | $135.00 | WR284 x EIA-7/8 Adapter - aftermarket mod. to high power conn. | 1 |
| HP/AGILENT | S370B | $150.00 | WR284 Fixed Attenuator, 6 dB, 1 Watt maximum | 1 |
| HP/AGILENT | S370C | $150.00 | WR284 Fixed Attenuator, 10 dB, 1 Watt maximum | 1 |
| HP/AGILENT | S370D | $150.00 | WR284 Fixed Attenuator, 20 dB, 1 Watt maximum | 1 |
| HP/AGILENT | S375A | $250.00 | WR284 Direct Reading Variable Attenuator, 0-20 dB, 1 Watt max. | 5 |
| HP/AGILENT | S382B | $550.00 | WR284 Precision Direct Reading Attenuator, 0-60 dB | 3 |
| HP/AGILENT | S382C | $900.00 | WR284 Precision Direct Reading Attenuator, 0-60 dB | 1 |
| HP/AGILENT | S424A | $150.00 | WR284 Crystal Detector, negative polarity | 4 |
| HP/AGILENT | S486A | $250.00 | WR284 Thermistor Mount, for HP 432 series power meters | 3 |
| HP/AGILENT | S750D | $250.00 | WR284 4-Port Crossguide Coupler, 20 dB coupling | 2 |
| HP/AGILENT | S752D | $675.00 | WR284 Directional Coupler, 20 dB coupling | 4 |
| HP/AGILENT | S810A/442B/420A | $300.00 | WR284 Slotted Line & Carriage, with probe & detector | 1 |
| HP/AGILENT | S870A | $225.00 | WR284 Slide Screw Tuner, uncalibrated drives | 3 |
| HP/AGILENT | S910A | $235.00 | WR284 Low Power Termination, 1 Watt average power, 1.06 VSWR | 1 |
| HP/AGILENT | S912A | $285.00 | WR284 Medium Power Term., 100 watts avg./ 100 kW pk, 1.1 VSWR | 3 |
| HP/AGILENT | S914A | $295.00 | WR284 Moving Load, uncalibrated drive | 1 |
| KEARFOTT | C99210030 | $225.00 | WR284 Isolator, 20 dB, 2.6-3.8 GHz, 20 Watts max. | 1 |
| M.C.S. | S-175 | $135.00 | WR284 x N(f) Adapter | 1 |
| M/A-COM | MA503654-S008 | $90.00 | CPR284 90 degree E-Plane Assymetrical Mitre Bend, 5" x 4" legs | 2 |
| M/A-COM | MA503670-S002 | $85.00 | CPR284 Straight Section, 8-5/16 inches length, flat/grooved fl's | 2 |
| M/A-COM | MA503674-S001 | $65.00 | CPR284 Straight Section, 4 inches length | 12 |
| MAURY MICROWAVE | S8138A | $135.00 | WR284 x SC(f) Adapter | 3 |
| MICROTECH | 226153 | $65.00 | WR284 Jacketed Flex Seection, 6.75 inches length, aluminum | 14 |
| MICROWAVE ASSOC. | MA37040S | $60.00 | CPR284 Limiter (T/R Tube), 2.8-3.1 GHz, 2-3/8 in. length | 1 |
| MICROWAVE ASSOC. | MA8K574 | $165.00 | CPR284 Circulator, 20 dB isolation, 3.03-3.17 GHz | 1 |
| MICROWAVE ENG. | S70L-501 | $275.00 | CPR284 High Power Low Pass Filter, -3 dB @ 3.47 GHz, 36" length | 1 |
| MICROWAVE RESEARCH | S40-NAM | $135.00 | WR284 x N(f) Adapter | 1 |
| NARDA | 354E | $90.00 | WR284 90 degree E-Plane Bend | 2 |
| NARDA | 414-20 | $300.00 | WR284 Standard Reflection, 1.50 VSWR | 1 |
| NARDA | 614 | $135.00 | WR284 x N(f) Adapter | 1 |
| NARDA | 644 | $500.00 | WR284 Standard Gain Horn, 16.5 dBi gain mid-band | 2 |
| NDL | S-401 | $135.00 | WR284 Termination, 2 Watts maximum | 1 |
| OMEGA LABS | 102 | $135.00 | WR284 x N(f) Adapter | 1 |
| OMEGA LABS | 282G | $250.00 | WR284 3-Port Crossguide Coupler, 30 dB coupling | 2 |
| OMEGA LABS | 6252K12 | $90.00 | CPR284 90 degree H-Plane Bend | 1 |
| OMEGA LABS | 942 | $135.00 | WR284 x SMA(f) Adapter | 1 |
| PRD | 175-A | $225.00 | WR284 Variable Attenuator, 0-40 dB, gage dial, 1W max | 1 |
| PRD | 309-A | $200.00 | WR284 Slide Screw Tuner, uncalibrated drives, lockable | 2 |
| PRD | 365-A | $135.00 | WR284 x N(f) Adapter | 3 |
| SECTOR MICROWAVE | SMS-213 | $300.00 | CPR284 4-Port DPDT Manual or Motor Drive Switch, 28 VDC | 1 |
| SYSTRON DONNER | DBL-057 | $135.00 | WR284 x N(f) Adapter | 1 |
| SYSTRON DONNER | DBL-231 | $90.00 | WR284 30 degree H-Plane Bend | 2 |
| TECHNICRAFT | CMR284 12"flex | $100.00 | CMR284 Jacketed Flex Section, 12 inch length, aluminum | 4 |
| TECHNICRAFT | TFT-86063-2 | $135.00 | CPR284 Jacketed Flex Section, 24 inches length, brass | 3 |
| TECHNICRAFT | TL-86170-2 | $195.00 | WR284 Jacketed Flexible Waveguide Section, 48 inches length | 2 |
| TECHNICRAFT | WR284 12"flex | $135.00 | WR284 Jacketed Flex Section, 24 inches length, cover/choke,brass | 1 |
| WAVELINE | 232-2 | $90.00 | WR284 90 degree E-Plane Bend | 1 |
| WAVELINE | 233 | $90.00 | WR284 90 degree H-Plane Bend, cover/choke flanges | 1 |
| WAVELINE | 233-2 | $90.00 | WR284 90 degree H-Plane Bend | 4 |
| WAVELINE | 239-2 | $90.00 | WR284 45 degree H-Plane Bend | 1 |
| WAVELINE | 242-06 | $90.00 | WR284 Straight Section, 6 in. length, cover/choke flanges, brass | 1 |
| WAVELINE | 270-30 | $265.00 | WR284 3-Port Crossguide Coupler, 30 dB coupling | 1 |
| WAVETRONICS | 2103-01 | $500.00 | WR284 Precision Direct Reading Attenuator, 0-60 dB | 1 |
| WESTINGHOUSE | 401250-1 | $225.00 | WR284 Dual Dir. Crossguide Cplr.,30 dB/N(f), 2.6-3.6GHz,choke fl | 1 |
| | | | WR340 WAVEGUIDE: 2.20-3.30 GHz | |
| ITS CORP. | ITS-8343 | $295.00 | CPR340 Dual Dir. Crossguide Cplr., 30 dB, N(f) coupled ports | 1 |
| MEGA INDUSTRIES | 67416-701/65979-705 | $800.00 | WR340 Water Load, 5 kW avg/2 gpm & 60 dB Dual Dir.Cplr. (Nf) | 8 |
| MICROWAVE RESEARCH | LS40-NA | $195.00 | WR340 x N(f) Adapter | 1 |
| | | | WR430 WAVEGUIDE: 1.70-2.60 GHz | |
| 3 dBm | L-175 | $225.00 | CPR430 (grooved flange) x N(f) Adapter, 1.25 VSWR, aluminum*NEW* | 9 |
| AIRCOM | 185-LS-20 | $185.00 | CPR430 Fixed Attenuator, 20 dB, 15 Watts max., 22 in. length | 1 |
| DIAMOND ANTENNA | 209 | $275.00 | CPR430 (grooved flange) Moving Load, uncalibrated drive | 1 |
| FXR/MICROLAB | R101B | $375.00 | WR430 Slotted Line, with tunable detector | 1 |
| MAURY MICROWAVE | R301B | $275.00 | CPR430 Low Power Termination, 12 W avg./ 5 kW peak, 1.025 VSWR | 1 |
| NARDA | 305 | $250.00 | CPR430 Low Power Termination | 1 |
| RANTEC | LS-102 | $150.00 | CPR430 Short Body Termination, 20 Watts, 2-1/2 inch length | 1 |
| WAVELINE | 90766 | $225.00 | CPR430 Short Loop Coupler, 30 dB, N(f) coupled port, 6 in.length | 1 |
| | | | WR650 WAVEGUIDE: 1.12-1.70 GHz | |
| ARA TECHNOLOGIES | MWH-21 | $1,200.00 | WR650 Standard Gain Horn, 17 dBi gain mid-band, w/adapter to Nf | 1 |
| DIELECTRIC COMM. | 36029 | $150.00 | WR650 90 degree H-Plane Bend | 2 |
| FXR/MICROLAB | L160B | $475.00 | WR650 Direct Reading Attenuator, 0-40 dB, 10 Watts maximum | 1 |
| GENERIC | WR650 E BEND | $125.00 | WR650 90 degree E-Plane Bend, 4.75 x 6.5 inch legs | 1 |
| RAYTHEON | 316792-1 | $85.00 | WR650 Pressure Window | 1 |
| | | | WRD180 DOUBLE RIDGE WAVEGUIDE: 18-40 GHz | |
| BOONTON | 51972 | $750.00 | WRD180 Power Sensor, -50 to +10 dBm, 18-40 GHz,for Boonton meter | 2 |
| CMT | 08349-01 | $300.00 | WRD180 x 2.92mm(m) Adapter | 1 |
| CMT | 10109781-10 | $275.00 | WRD180 x 2.92mm(f) Adapter, 1-1/2 inch dia. Bulkhead mounting | 1 |
| CMT | DRS180-1C1C-4.0 | $95.00 | WRD180 Straight Section, 4 inches length | 2 |
| CMT | DRT180-1C1C-90-4 | $100.00 | WRD180 90 degree Left Hand Twist Section, 4 inches length | 2 |
| CMT | RHB180-1C1C-2.5-2.5 | $100.00 | WRD180 90 degree H-Plane Bend, 2.5 inch legs | 2 |
| CMT | WT180-28-1C-1A | $225.00 | WRD180 x WR28 Taper Section, 3-1/2 inches length, aluminum | 3 |
| HONEYWELL | FK/Ka-UT | $475.00 | WRD180 Mixer,RF/LO=18-40 GHz,LO=+3dBm,amplified IF=1-1000MHz,15V | 1 |
| M.D.C. | 22180-120 | $275.00 | WRD180 x 2.92mm(f) Adapter, 1-1/2 inch dia. bulkhead mounting | 8 |
| MICROWAVE ENG. | R135 | $95.00 | WRD180 90 degree H-Plane Bend | 3 |
| MICROWAVE ENG. | R15-15.75-C1C1 | $135.00 | WRD180 Straight Section, 15-3/4 inches length | 1 |
| MICROWAVE ENG. | R15-16.25-C1C1 | $135.00 | WRD180 Straight Section, 16-1/4 inches length | 4 |
| MICROWAVE ENG. | R15-24-C1C1 | $165.00 | WRD180 Straight Section, 24 inches length | 2 |
| MICROWAVE ENG. | R165-3 | $500.00 | WRD180 Directional Coupler. 3 dB coupling | 3 |
| MICROWAVE ENG. | R165-3K | $500.00 | WRD180 Directional Coupler, 3 dB coupling,2.92mm(f) coupled port | 3 |
| MICROWAVE ENG. | R165-6K | $500.00 | WRD180 Directional Coupler, 6 dB coupling,2.92mm(f) coupled port | 2 |
| MICROWAVE ENG. | R45-K | $300.00 | WRD180 x 2.92mm(f) Adapter | 1 |
| MICROWAVE ENG. | RE45-K | $300.00 | WRD180 x 2.92mm(f) End Launch Adapter | 10 |
| WAVEGUIDE ENG. | WRD180-028A | $175.00 | WRD180 x WR28 Taper Section, 2-1/2 inches length, aluminum | 1 |
| WILTRON | SC3564 | $300.00 | WRD180 x 2.92mm(f) Adapter, 1-1/2 inch dia. bulkhead mounting | 3 |
| | | | WRD750 DOUBLE-RIDGE WAVEGUIDE: 7.5-18.0 GHz | |
| AIRTRON | 433800 | $225.00 | WRD750 High Power Isolator, 18 dB, 11-15 GHz, 50 Watts | 1 |
| AIRTRON | TM7149 | $175.00 | WRD750 Short Loop Directional Coupler, 36 dB, 2.5 inches, SMA(f) | 2 |
| CMT | 106096-1 | $275.00 | WRD750 Dual Directional Crossguide Coupler, 50 dB, SMA(f) cpld. | 3 |
| CMT | DRA-750-TNCM | $135.00 | WRD750 x TNC(m) Adapter | 1 |
| CMT | HPM750-9.6 | $300.00 | WRD750 High Power Mismatch, 9.6 dB return loss, 350 Watts CW | 1 |
| GENERIC | WRD750 E 90 | $65.00 | WRD750 90 degree E-Plane Bend, flat flanges | 1 |
| MARCONI | 3452601 | $175.00 | WRD750 Harmonic Suppression Filter, 18-36 GHz rejection >30 dB | 1 |
| MICROTECH | 218053 | $110.00 | WRD750 Jacketed Flexible Waveguide Section, 15 in., flat/grooved | 31 |
| MICROTECH | 218075 | $110.00 | WRD750 Jacketed Flexible Waveguide Section, 12 in., grooved fl's | 10 |
| MICROTECH | 218334 | $110.00 | WRD750 Jacketed Flexible Waveguide Section, 21 in., grooved fl's | 3 |
| MICROTECH | 227476 | $350.00 | WRD750 Directional Coupler, 20 dB coupling, N(f) coupled port | 1 |
| MICROWAVE ENG. | R160-2N | $375.00 | WRD750 Directional Coupler, 20 dB coupling, N(f) coupled port | 2 |
| MICROWAVE ENG. | R600-128 | $145.00 | WRD750 Short Loop Coupler, 30 dB coupling, N(f) coupled port | 4 |
| MICROWAVE RESEARCH | R160-3-3 | $375.00 | WRD750 Directional Coupler, 30 dB coupling, SMA(f) coupled port | 1 |
| MICROWAVE RESEARCH | R40-TMA | $145.00 | WRD750 x TNC(m) Adapter | 1 |
| MICROWAVE RESEARCH | R50-37 | $125.00 | WRD750 Short Loop Coupler, 30 dB coupling, N(f) coupled port | 1 |
| MICROWAVE RESEARCH | R50-3N | $125.00 | WRD750 Sampling Coupler, 50 dB coupling, N(f) coupled port | 1 |
| MICROWAVE RESEARCH | R600-37M | $145.00 | WRD750 Short Loop Coupler, 30 dB coupling, APC7 coupled port | 1 |
| MICROWAVE RESEARCH | R80-L | $145.00 | WRD750 Low Power Termination, VSWR <1.04 | 4 |
| MICROWAVE RESEARCH | R80-X | $250.00 | WRD750 High Power Load, 200 Watts average | 2 |
| MW. ENGINEERING | R40-438 | $150.00 | WRD750 x SMA(m) Adapter *NEW* | 4 |
| OMNI-SPECTRA | 2000-6275-00 | $165.00 | WRD750 x SMA(f) Adapter, VSWR 1.25 maximum *UNUSED* | 68 |
| TECHNICRAFT | TDR-14007 | $65.00 | WRD750 90 degree E-Plane Bend, flat/grooved flanges | 1 |
| TECHNICRAFT | TDR-14011-10 | $375.00 | WRD750 Directional Coupler, 10 dB coupling, SMA(f) coupled port | 2 |
| TECHNICRAFT | TDR-14114 | $45.00 | WRD750 30 degree E-Plane Bend, flat/grooved flanges | 1 |
| TECHNICRAFT | TDR-14120 | $45.00 | WRD750 170 degree H-Plane Bend, flat/grooved flanges | 30 |
| TECHNICRAFT | TDR-14133 | $45.00 | WRD750 80 degree H-Plane Bend, flat/grooved flanges | 25 |
| TECHNICRAFT | TDR-14-2-A-15 | $100.00 | WRD750 Straight Section, 15 inches length | 1 |
| TECHNICRAFT | TDR-14402 | $60.00 | WRD750 90 degree E-Plane Bend, attached 2.3x2.9" bulkhead plate | 1 |
| TECHNICRAFT | TDST14-6-24-N | $145.00 | WRD750 Jacketed Flexible Waveguide, 24 in. length, grooved fl's | 2 |
| TECHNICRAFT | TDST14-6-24NA | $145.00 | WRD750 Jacketed Flexible Waveguide, 24 in., flat/grooved fl's | 1 |
| TECHNICRAFT | TDST14-6-24NB | $145.00 | WRD750 Jacketed Flexible Waveguide, 24 in., flat flanges | 1 |
| WAVELINE | 94511 | $285.00 | WRD750 SPDT Switch, 28 VDC, failsafe | 2 |
| | | | WRD650 WAVEGUIDE: 6.5-18.0 GHz | |
| AIRTRON | 126233 | $145.00 | WRD650 Flexible/Twistable Section, 12 in. length, flat/grooved | 1 |
| CMT | DRA650-N-F-1C | $150.00 | WRD650 x N(f) Adapter | 1 |
| CMT | DRA650-SMAF | $135.00 | WRD650 x SMA(f) Adapter | 2 |
| CMT | DRPS650-1-TNC | $125.00 | WRD650 Sampling Coupler, 30 dB, TNC(f) coupled port, 2 in.length | 1 |
| CMT | DRPS650-40 | $125.00 | WRD650 Sampling Coupler, 40 dB, TNC(f) coupled port, 2 in.length | 3 |
| CMT | DRS650-2 | $60.00 | WRD650 Straight Section, 2 inches length | 4 |
| CMT | DRS650-6 | $65.00 | WRD650 Straight Section, 6 inches length | 2 |
| CMT | HPTAC650-2C | $375.00 | WRD650 High Power Load, 750 Watts average, with 115VAC fan | 1 |
| CMT | LPT650 | $150.00 | WRD650 Low Power Termination, 5 Watts maximum, 1.10 VSWR | 12 |
| CMT | REB650-2G2G-6.7 | $85.00 | WRD650 90 degree E-Plane Bend, 6.7 inch legs, grooved flanges | 1 |
| CMT | REB650-3-3 | $75.00 | WRD650 90 degree E-Plane Bend, flat/grooved flanges | 3 |
| CMT | RHB650-2-2 | $75.00 | WRD650 90 degree H-Plane Bend | 5 |
| CMT | RHB650-3-3 | $75.00 | WRD650 90 degree H-Plane Bend, flat/grooved flanges | 1 |
| CMT | RRS-650-1.0 | $45.00 | WRD650 Straight Section, 1 inch length, grooved flanges | 1 |
| CMT | WRD650 7 dB att. | $65.00 | WRD650 7 dB Fixed Attenuator, 6 inches length | 1 |
| CMT | WT650-102A | $185.00 | WRD650 x WR102 Waveguide Taper, 6-1/2 inches length | 1 |
| MAURY MICROWAVE | DA340B | $100.00 | WRD650 1.500cm (5/8-wavelength) Offset Short | 1 |
| MICROWAVE ENG. | R137 | $75.00 | WRD650 90 degree H-Plane Bend | 4 |
| MICROWAVE ENG. | R37-247 | $185.00 | WRD650 x WRD475 Taper Section, 6 inches length | 1 |
| MICROWAVE ENG. | R387-103 | $235.00 | WRD650 SPDT Switch, manual or 24VDC motor operation, latching | 1 |
| MICROWAVE ENG. | R77-177 | $185.00 | WRD650 Harmonic Absorption Filter, >40 dB rejection 20.7-40 GHz | 1 |
| MICROWAVE RESEARCH | 650-51 | $185.00 | WRD650 x WRD475 Tapered Transition, 5 inches length | 1 |
| MICROWAVE RESEARCH | R17-6 | $75.00 | WRD650 Straight Section, 6 inches length | 1 |
| MICROWAVE RESEARCH | R17-9-C1C1 | $65.00 | WRD650 Straight Section, 9 inches length | 1 |
| MICROWAVE RESEARCH | R47-7 | $125.00 | WRD650 x APC7 Adapter | 1 |
| MICROWAVE RESEARCH | R87-X | $250.00 | WRD650 High Power Load, 200 watts average | 2 |
| MICROWAVE RESEARCH | RW101 | $100.00 | WRD650 (grooved flange) x TNC(f) Adapter | 1 |
| MICROWAVE RESEARCH | WRD650 term. | $145.00 | WRD650 Low Power Termination, VSWR <1.04 | 1 |
| MW. DEVELOPMENT CO. | 003631-001 | $200.00 | WRD650 Magic Tee, 2 inch insertion length | 2 |
| MW. DEVELOPMENT CO. | 20650-4-S | $125.00 | WRD650 Sampling Coupler, 40 dB coupling, SMA(f) coupled port | 7 |
| MW. DEVELOPMENT CO. | 21650-H | $375.00 | WRD650 High Power Load, 1000 Watts average | 2 |
| MW. DEVELOPMENT CO. | 21650-L | $145.00 | WRD650 Low Power Termination | 3 |
| MW. DEVELOPMENT CO. | 22650-329 | $135.00 | WRD650 x TNC(f) End Launch Adapter | 1 |
| MW. DEVELOPMENT CO. | 22650-7 | $145.00 | WRD650 x APC7 Adapter | 3 |
| MW. DEVELOPMENT CO. | 24650-ME | $75.00 | WRD650 90 degree E-Plane Bend | 5 |
| MW. DEVELOPMENT CO. | 2488277 | $135.00 | WRD650 Short Loop Dir. Coupler, 40 dB coupling, SMA(f) coupled | 7 |
| MW. DEVELOPMENT CO. | 2488278 | $65.00 | WRD650 Unjacketed Flexible Waveguide Section, 4.5 in. length | 1 |
| MW. DEVELOPMENT CO. | 2488279 | $135.00 | WRD650 x TNC(f) Adapter | 4 |
| MW. DEVELOPMENT CO. | 33650-10 | $65.00 | WRD650 Straight Section, 2 inches length | 5 |
| MW. DEVELOPMENT CO. | 3475-650 | $185.00 | WRD650 x WRD475 Taper Transition, 6 inches length | 1 |
| MW. DEVELOPMENT CO. | 475-650 | $185.00 | WRD650 x WRD475 Waveguide Taper, 6 inches length | 1 |
| NEICO MICROWAVE | 20398 | $225.00 | WRD650 Matched Hybrid Tee | 1 |
| NEICO MICROWAVE | 21049 | $195.00 | WRD650 x WR137 Waveguide Taper, 10-1/4 inches length | 1 |
| NEICO MICROWAVE | 21051-2G | $75.00 | WRD650 90 degree H-Plane Bend | 10 |
| NEICO MICROWAVE | 21161-1 | $185.00 | WRD650 x WR102 Waveguide Taper, 6-1/2 inches length | 2 |
| NEICO MICROWAVE | 28091 | $135.00 | WRD650 x TNC(f) Adapter | 1 |
| NOVAK | W650FH1 | $235.00 | WRD650 Manual or Motor Driven SPDT Switch, failsafe, 28VDC | 1 |
| TECHNICRAFT | 19650-133 | $185.00 | WRD650 Band Pass Filter, 6.5-10.0 GHz, 12-3/4 inches length | 1 |
| TECHNICRAFT | RW101-002 | $100.00 | WRD650 (grooved flange) x TNC(f) Adapter | 1 |
| TECHNICRAFT | TDR-10001 | $145.00 | WRD650 Low Power Termination | 2 |
| TECHNICRAFT | TDR-10002-10 | $395.00 | WRD650 Directional Coupler, 10 dB coupling, SMA(f) coupled port | 1 |
| TECHNICRAFT | TDR-10C0000 | $125.00 | WRD650 x SMA(f) Adapter | 1 |
| TECHNICRAFT | TDR-22999-3 | $25.00 | WRD650 Shorting Cover | 1 |
| | | | WRD580 WAVEGUIDE: 5.8-16.0 GHz | |
| ADVANCED MW. COMP. | 112TR580DR-1 | $175.00 | WRD580 (grooved flange) x CPR112 (grooved flange) Taper, 5.7 in. | 1 |
| ADVANCED MW. COMP. | 137TR580DR-1 | $175.00 | WRD580 (flat flange) x CPR137 (grooved flange) Taper, 6 inches | 1 |
| ADVANCED MW. LTD. | 580-650 taper | $135.00 | WRD580 x WRD650 Taper Section, 2.40 inches length | 1 |
| ADVANCED MW. LTD. | C-580-20 | $375.00 | WRD580 Directional Coupler, 20 dB coupling | 1 |
| ADVANCED MW. LTD. | DL-580 | $250.00 | WRD580 High Power Load, 250 Watts average | 1 |
| ATLANTIC MICROWAVE | AMC112-TR580 | $165.00 | WRD580 x CPR112 (grooved flange) Taper, 5.7" length | 15 |
| ATLANTIC MICROWAVE | AMC580-FLT-6A | $95.00 | WRD580 Jacketed Flexible Waveguide Section, 6 in., flat/grooved | 4 |
| CMT | DFG580-16-2G2G | $175.00 | WRD580 Jacketed Flexible Waveguide Section, 16 in. length *NEW* | 1 |
| CMT | DFG580-3-1G1G | $85.00 | WRD580 Jacketed Flexible Waveguide Section, 3 in. length *NEW* | 1 |
| CMT | ST580-2 | $65.00 | WRD580 Straight Section, 2 in. length, flat/grooved flanges*NEW* | 32 |
| DAGE-BELL | 27C3449 | $25.00 | WRD580 (grooved flange) Shorting flange cover | 1 |
| GENERIC | WRD580 BLKD | $35.00 | WRD580 Bulkhead, cover/grooved flanges, 3/4 inch length | 1 |
| GENERIC | WRD580 FLEX | $45.00 | WRD580 Unjacketed Flex Section, grooved flanges, 1-1/2 in.length | 1 |
| LOGUS | MWDPR580BSL2 | $195.00 | WRD580 Motorized DPDT Transfer Switch, 28VDC | 14 |
| TECHNICRAFT | R178S-2 | $50.00 | WRD580 Flexible Waveguide Section, 2 inches length, grooved fl's | 8 |
| | | | WRD475 DOUBLE-RIDGE WAVEGUIDE: 4.75-11.0 GHz | |
| AIRTRON | 453115N | $145.00 | WRD475 x N(f) Adapter | 1 |
| AIRTRON | AFD-7B-475-5.50 | $85.00 | WRD475 Jacketed Flex Section, 5.5 inches length, flat/grooved fl | 1 |
| AIRTRON | ARDT-7A-475-5.5 | $75.00 | WRD475 90 degree Twist Section, 5.5 in. length, flat/grooved fl | 1 |
| BOGART | GE7733189P2 | $100.00 | WRD500 x WR187 (choke flange) Taper Section, 8 in. length *NEW* | 8 |
| CMT | DRA475-NF-1C | $145.00 | WRD475 x N(f) Adapter | 1 |
| MAURY MICROWAVE | DB102A5 | $75.00 | WRD475 Precision Straight Section, 5 in. length, 1.03 VSWR | 1 |
| MAURY MICROWAVE | DB209A | $150.00 | WRD475 x APC7 Adapter | 2 |
| MAURY MICROWAVE | DB301A | $165.00 | WRD475 Fixed Termination, 1 Watt maximum, 1.04 VSWR maximum | 1 |
| MAURY MICROWAVE | DB313A | $195.00 | WRD475 Sliding Termination, <1.01 VSWR typical | 1 |
| MAURY MICROWAVE | DB340A/B/C/D | $200.00 | Set of four WRD475 Offset Shorts, 0.45/ 1.0/ 1.35/ 3.0 cm offset | 1 |
| MAURY MICROWAVE | DB7005A | $1,250.00 | WRD475 Calibration Kit:adapters;load;sliding load;offsets;short | 1 |
| MICROWAVE ENG. | R171-8 | $65.00 | WRD75 Jacketed Flexible Waveguide Section, 8 in. length | 1 |
| MICROWAVE ENG. | R41-435 | $135.00 | WRD475 x SMA(m) Adapter | 2 |
| MICROWAVE ENG.CORP. | R81-X | $350.00 | WRD475 High Power Load, 600 Watts average | 7 |
| MICROWAVE RESEARCH | R121 | $65.00 | WRD475 90 degree E-Plane Bend | 1 |
| MICROWAVE RESEARCH | R131-H | $75.00 | WRD475 90 degree H-Plane Bend | 1 |
| MICROWAVE RESEARCH | R151 | $65.00 | WRD475 90 degree Twist Section, 5.4 inches length | 1 |
| MICROWAVE RESEARCH | R50-51 | $195.00 | WRD475 x WRD750 Waveguide Taper, 5 inches length | 1 |
| MICROWAVE RESEARCH | R601-5N | $125.00 | WRD475 Short Loop Coupler, 50 dB, N(f) coupled port | 2 |
| MICROWAVE RESEARCH | R81-L | $135.00 | WRD475 Low Power Termination | 6 |
| MICROWAVE RESEARCH | R81-LS | $195.00 | WRD475 Moving Load | 2 |
| MICROWAVE RESEARCH | R91-147 | $200.00 | WRD475 3-Port Crossguide Coupler, 50 dB, N(f) coupled arm | 1 |
| MICROWAVE RESEARCH | R91-4N | $200.00 | WRD475 3-Port Crossguide Coupler, 40 dB, N(f) coupled arm | 1 |
| MICROWAVE RESEARCH | R91-5N | $200.00 | WRD475 3-Port Crossguide Coupler, 50 dB, N(f) coupled arm | 4 |
| MICROWAVE RESEARCH | WRD475 sampler | $100.00 | WRD475 Sampling Coupler, 50 dB, N(f) coupled port, flat/grooved | 1 |
| MICROWAVE RESOURCES | WRD-475-C | $225.00 | WRD475 Dual Dir. Crossguide Coupler,-50 dB fwd Nf/-35 dB rev Nf | 1 |
| MW. DEVELOPMENT CO. | 22475-T | $135.00 | WRD475 x TNC(f) Adapter | 1 |
| MW. DEVELOPMENT CO. | 29475-107 | $40.00 | WRD475 Bulkhead Feedthru, 2.69" length; 3.25"x2.75" 4-hole mount | 9 |
| OMEGA LABS | BE9-475 | $75.00 | WRD475 90 degree E-Plane Bend | 1 |
| OMNI-SPECTRA | 2001-4276-00 | $125.00 | WRD475 x SMA(m) Adapter, 6.0-11.0 GHz | 1 |
| TECHNICRAFT | TDFT-22005 | $135.00 | WRD475 Jacketed Flexible Waveguide Section, 15 in. length | 2 |
| TECHNICRAFT | TDR-22001-10 | $350.00 | WRD475 Directional Coupler, 10 dB, N(f) coupled arm, 25" length | 2 |
| TECHNICRAFT | TDR-22002 | $135.00 | WRD475 Low Power Termination | 6 |
| TECHNICRAFT | TDR-22020-1 | $75.00 | WRD475 Straight Section, 12 inches length | 5 |
| TECHNICRAFT | TDR-22032-1 | $50.00 | WRD475 Straight Section, 6 inches length | 1 |
| TECHNICRAFT | TDR-22032-2 | $65.00 | WRD475 Straight Section, 15 inches length, cover/grooved flanges | 1 |
| TECHNICRAFT | TDR-22202 | $65.00 | WRD475 90 degree E-Plane Bend | 2 |
| TECHNICRAFT | TDR-22C017 | $135.00 | WRD475 x APC7 Adapter | 1 |
| TECHNICRAFT | TDRI-422000 | $195.00 | WRD475 x WRD750 Waveguide Taper, 6 inches length | 1 |
| | | | WRD350 DOUBLE-RIDGE WAVEGUIDE: 3.5-8.2 GHz | |
| AIRTRON | WRD350 31" flex | $200.00 | WRD350 Jacketed Flex Waveguide Section, 31 inches, grooved fl's | 1 |
| MAURY MICROWAVE | DC209A | $150.00 | WRD350 x APC7 Adapter | 1 |
| MICROTECH | 218197 | $85.00 | WRD350 90 degree E-Plane Bend, grooved flanges | 4 |
| MICROTECH | 218201 | $225.00 | WRD350 Jacketed Flex Waveguide Section, 30.7 inches,flat/grooved | 1 |
| MICROTECH | 218203 | $225.00 | WRD350 Jacketed Flex Waveguide Section, 27 inches, flat/grooved | 1 |
| MICROTECH | 218236 | $150.00 | WRD350 Jacketed Flex Waveguide Section, 13.5 inches,flat/grooved | 2 |
| MICROTECH | 218249 | $85.00 | WRD350 90 degree E-Plane Bend, flat & grooved flanges | 1 |
| MICROWAVE RESEARCH | R122 | $75.00 | WRD350 90 degree E-Plane Bend, flat & grooved flanges | 1 |
| MICROWAVE RESEARCH | R122-C1C1 | $85.00 | WRD350 90 degree E-Plane Bend, flat flanges | 3 |
| MICROWAVE RESEARCH | R82-L | $150.00 | WRD350 Low Power Termination | 1 |
| MW. DEVELOPMENT CO. | 22350-S | $135.00 | WRD350 x SMA(f) Adapter | 1 |
| TECHNICRAFT | TTD-29301 | $400.00 | WRD350 Slotted Line with carriage and N(f) probe | 1 |
| TECHNICRAFT | WRD350 E 90 | $85.00 | WRD350 90 degree E-Plane Bend, flat & grooved flanges | 1 |
| | | | WRD200 DOUBLE-RIDGE WAVEGUIDE: 2.0-4.8 GHz | |
| CMT | DRPS200-1-NM | $175.00 | WRD200 Sampling Coupler, 30 dB, N(m) coupled port, 3 in. length | 1 |
