ASK*--PLEASE CONTACT US
| MANUFACTURER |
MODEL |
PRICE |
DESCRIPTION |
QUANTITY* |
| | | | CMR229 & CPR229 WAVEGUIDE: 3.30-4.90 GHz | |
| ANDREW | 19008-229 | 25 | WR229 Sliding Hanger Assembly *NEW* | 3 |
| ANDREW | 200814 | 135 | CPR229 (grooved flange) Termination, 10 Watts maximum, 1.10 VSWR | 1 |
| ANDREW | 49000-229F1 | 900 | CPR229 Hybrid Tee Reflectometer Test Set, 3.7-4.2 GHz,>60 dB dir | 1 |
| ANDREW | 62901-229 | 45 | CPR229 Straight Section, 5 inches length, grooved flanges | 2 |
| ANDREW | F229PE01 | 135 | CMR229 Flexible / Twistable Jacketed Section, 18 in. length*NEW* | 7 |
| ANDREW | M229P-0E030-AN | 75 | CMR229 90 degree miter H-Plane Bend *NEW* | 7 |
| ANRITSU | 23UM40 | 135 | CPR229/UDR40 1/8-wavelength Offset Short | 1 |
| ANRITSU | 23UM40 & 24UM40 | 195 | CPR229/UDR40 1/8-wavelength & 3/8-wavelength Offset Short pair | 1 |
| ANRITSU | 24UM40 | 135 | CPR229 3/8-wavelength Offset Short | 1 |
| APOLLO MICROWAVES | 10351 | 110 | CPR229 (grooved flange) Termination, 10 Watts max., 1.15 VSWR | 1 |
| APOLLO MICROWAVES | 10706-3 | 225 | CPRG229 3-Port Crossguide Coupler, 40 dB coupling | 1 |
| APOLLO MICROWAVES | CMR229-SMAf | 95 | CMR229 x SMA(f) Adapter | 2 |
| ARRA | 1507 | 110 | CPR229 Low Power Termination, 2 Watts,with 20 dB Nf coupled port | 1 |
| ARRA | 229-620-A3-3-10SF | 550 | CPR229 Directional Coupler, 10 dB, SMA(f) coupled port, 42 in. | 1 |
| ARRA | CPR229F-462 | 115 | CPR229 x SMA(f) Adapter, aluminum body | 1 |
| ARRA | CPR229F-462B | 115 | CPR229 x SMA(f) Adapter, brass body | 1 |
| ARRA | CPR229G-640A | 135 | CPR229 Low Power Termination, 10 Watts, 1.10 VSWR, grooved fl. | 1 |
| ATLANTIC MICROWAVE | CPRG229 crossguide | 235 | CPR229 (grooved flanges) 3-Port Crossguide Coupler, terminated, 20 dB coupling | 1 |
| BOGART | 91954 | 110 | CMR229 Low Power Termination, 5 Watts | 1 |
| CALIFORNIA MW. | 52-022231 | 95 | CMR229 x SMA(f) Adapter | 1 |
| CALIFORNIA MW. | TR43-CW112 | 85 | CMR229 x SMA(f) Adapter | 2 |
| CMT | RA229-N-F-13A-A | 115 | CPR229 x N(f) Adapter | 1 |
| COM DEV LTD. | SPT-50-1 | 550 | CPR229/CMR229 Directional Coupler, 10 dB coupling, 47 in. length | 1 |
| FARINON | 3742S1A | 85 | CMR229 Isoadapter,25 dB isol.,3.7-4.2 GHz,waveguide in/ SMAf out | 1 |
| GARDINER | C-Band LNA | 85 | CPR229 LNA, 50 dB gain, 30 deg. noise temp., 3.7-4.2 GHz, 12V | 1 |
| GENERAL ELECTRIC | 7733187P1 | 250 | CMR229 High Power Load, 1.5 kW average, 12 in. length | 2 |
| GENERIC | CMR229 isoadapt | 75 | CMR229 Isoadapter, 20 dB isolation, 3.3-4.5 GHz, N(f) input | 1 |
| GENERIC | CMR229 x SCf | 85 | CMR229 x SC(f) Adapter | 1 |
| GENERIC | CPR229 SHORT | 25 | CPR229 Shorting Plate | 1 |
| GENERIC | CPR229 X WR284 | 135 | CPR229 to WR284 Taper Section, 5-1/8 inches length | 1 |
| HNL, INC. | U-173-CMR | 100 | CMR229 x SMA(f) Adapter | 2 |
| HP/KEYSIGHT | 0950-0607 | 75 | CMR229 Isoadapter, 20 dB, 3.55-4.75 GHz, CMR229 in / N(f) out | 1 |
| LNR COMMUNICATIONS | 116000572-2 | 225 | CPR229 (grooved flange) 3-Port Crossguide Coupler, 30 dB, N(f) coupled port | 1 |
| LOGUS MICROWAVE | MWDM-229-BOL-7X18 | 265 | CPR229 Motorized DPDT Transfer Switch, 24 VDC, with parallel DC-4 GHz coaxial switching (SMAf) | 5 |
| M/A-COM | MA7Y045 | 85 | CMR229 Isoadapter, 20 dB, 3.5-4.5 GHz, waveguide in/ SMA(f) out | 1 |
| MASURY MICROWAVE | E166C | 95 | CPR229F to CMR229 Flange Adapter, 0.5 inch insertion length | 2 |
| MAURY MICROWAVE | E313A | 275 | CPR229 Sliding Termination, uncalibrated drive | 1 |
| MAURY MICROWAVE | E320D | 275 | CPR229 Mismatch Standard, 1.20 VSWR | 1 |
| MICROWAVE FILTER CO. | 3763-229NF | 100 | CPR229 x N(f) Adapter | 1 |
| MICROWAVE RESEARCH | B240M-3 | 85 | Half-Height WR229 x SMA(f) Adapter | 4 |
| MICROWAVE RESEARCH | B40M-7A-SP | 95 | CMR229 x APC7 Adapter | 6 |
| MICROWAVE RESEARCH | B40M-NA | 95 | CMR229 x N(f) Adapter | 8 |
| MITEC | M0926-02-03 | 95 | CMR229 x N(f) Adapter | 1 |
| MITEC | M1096 | 235 | CMR229 Matched Hybrid Tee Splitter, one leg terminated, 2W input | 1 |
| MITEC | M1246-2-12-45-L11 | 85 | CPR229 45 degree Twist Section, 12 inches length,grooved flanges | 2 |
| MITEC | M1686-2 | 110 | CPR229 (grooved flange) Low Power Termination, 5 Watts, 1.1 VSWR | 1 |
| MW. DEVELOPMENT CO. | 51229-1N | 395 | CPR229 Dir. Bridge, 40 dB directivity 3.6-4.4 GHz, N(f) in& out | 1 |
| NARDA | 229-601 | 115 | CMR229 x N(f) Adapter, brass body | 1 |
| NARDA | 46028-2 | 250 | CPR229 (grooved flanges) 3-Port Crossguide Coupler, 30 dB, N(f) coupled port | 1 |
| NEICO MICROWAVE | 14623 | 200 | CMR229 Manual DPDT Transfer Switch | 1 |
| OMEGA LABS | 10001-165 | 95 | CMR229 x N(f) Adapter | 1 |
| OMEGA LABS | 313-C | 550 | CMR229 Directional Coupler, 10 dB coupling, 42 inches length | 2 |
| OMEGA LABS | 313-X12C | 550 | CPR229 Directional Coupler, 10 dB coupling, 42 inches length | 1 |
| OMEGA LABS | 653 | 250 | CMR229 Moving Load, uncalibrated drive | 1 |
| SECTOR MICROWAVE | 2EGS | 275 | CPR229 DPDT Transfer Switch, +41 VDC actuator & manual override | 1 |
| SPECIALTY MICROWAVE | AA229N-1 | 115 | CPR229 x N(f) Adapter | 4 |
| TECHNICRAFT | TFT-82008-36 | 125 | CMR229 Flexible Waveguide Section, 36 inches length | 1 |
| WAVELINE | 2901-NF (CPR) | 115 | CPR229 x N(f) Adapter, brass body | 1 |
| WAVELINE | 2901-WML (CPR) | 115 | CPR229 x SMA(f) Adapter, aluminum body | 1 |
| WAVELINE | 2922 | 650 | CMR229 Precision Direct Reading Attenuator, 0-60 dB | 3 |
| WAVELINE | 2941-S | 95 | CPRG229 x CMR229 Flange Adapter, 3 inches length, brass | 1 |
| WAVELINE | 2959 | 400 | CMR229 E-H Plane Tuner, counter drives | 1 |
| WAVELINE | 2974-10 | 550 | CMR229 Directional Coupler, 10 dB coupling, 40 inches length | 2 |
| WAVELINE | 2979E | 350 | CPR/CMR229 Manual or Motor Driven DPDT E-Plane Switch | 1 |
| WAVELINE | 2982 | 395 | CMR229 High Power Load, 4.5 kW average, 2.2 MW peak | 1 |
| WAVELINE | 2983 | 250 | CMR229 Slide Screw Tuner, vernier read | *ASK |
| WAVELINE | 2999 | 295 | CMR229 Standard Gain Horn, 15 dBi gain mid-band, with adapter to N(f) | 1 |
| WAVELINE | 91440 | 250 | CMR229 Manual or Motor Driven DPDT Switch, 115 VAC | 1 |
| WAVELINE | 92108B | 115 | CMR229 Short Body Termination, 10 Watts, 1.15 VSWR, 3 inches length | 1 |
| WAVETRONICS | 1663-02 | 85 | Half-Height WR229 x APC7 Adapter | 5 |
| WESTERN ELECTRIC | 24A | 95 | CMR229 x N(f) Adapter | 2 |
| WESTERN ELECTRIC | 776-3210 | 100 | CMR229 Low Power Termination, 2 Watts | 1 |
| | | | WR284 WAVEGUIDE: 2.60-3.95 GHz | |
| AIRCOM | 121-S00 | 225 | WR284 (choke flange) Moving Load, uncalibrated drive | 1 |
| ANDREW | C284-CNSG | 225 | CPR284 (grooved flange) x N(f) Adapter | 1 |
| ASTEX/ GERLING | GL405 | 225 | WR284 Quadruple Stub Tuner, 12 inches length | 1 |
| ATLANTIC MICROWAVE | 401250-1 | 295 | WR284 Dual Directional Crossguide Coupler, 30 dB coupling, N(f) coupled ports, 14.25 inches length, choke flanges | 1 |
| ATLANTIC MICROWAVE | CMR284 load | 250 | CMR284 Medium Power Load, 500 Watts average/ 4 MW peak, aluminum, 12.75 inches length | 1 |
| ATLANTIC MICROWAVE | WR284 E 180 bend | 100 | WR284 180 degree E-Plane Bend, aluminum, 6 inch center-to-center | 1 |
| ATM | 284-302A-30-6-6 | 250 | WR284 3-Port Crossguide Coupler, 30 dB coupl;ing, N(f) coupled port | 1 |
| BOGART | S-4032 | 450 | WR284 Liquid Cooled Load, 15 kW average power/19 MW peak, 5 gpm min. flow required, same as FXR WL-0025 | 1 |
| COLEMAN MICROWAVE | 502550M | 450 | CPR284 Tunable BPFL, 2.7-2.9 GHz, 10 MHz 3 dB bw, 0.5dB loss,30" length | 1 |
| CUBIC | CU-51-1000 | 165 | WR284 x WR112 Taper Section, 9.38 inches length | 1 |
| CUBIC | CU-52-1000 | 165 | WR284 x WR90 Taper Section, 10.38 inches length | 1 |
| DEMORNAY BONARDI | DBL-234 | 90 | WR284 90 degree H-Plane Bend | 1 |
| DEMORNAY BONARDI | DBL-520-15 | 435 | WR284 Standard Gain Horn, 15 dBi gain mid-band | 1 |
| DEMORNAY BONARDI | DBLH-018 | 165 | WR284 x WR112 Taper Section, 9.5 inches length, cover flanges | 1 |
| DIAMOND ANTENNA | 449 | 435 | WR284 Standard Gain Horn, 16.5 dBi gain mid-band | 1 |
| DOUGLAS MICROWAVE | 110S | 435 | WR284 Standard Gain Horn, 15 dBi gain mid-band | 1 |
| FXR/MICROLAB | 164-A17 | 600 | CPR284 Precision Direct Reading Attenuator, 0-60 dB | 1 |
| FXR/MICROLAB | S-311A | 265 | WR284 Slide Screw Tuner, vernier drive | 1 |
| FXR/MICROLAB | S601B | 175 | WR284 x N(f) Adapter, brass body | 3 |
| FXR/MICROLAB | S621A | 135 | WR284 H-Plane (Shunt) Tee | 1 |
| FXR/MICROLAB | S624B | 90 | WR284 90 degree H-Plane Bend | 1 |
| FXR/MICROLAB | S638A | 495 | WR284 Standard Gain Horn, 18 dBi gain mid-band | 1 |
| GENERIC | CPRG284 Shim | 45 | CPR284 Shim, 0.10 inch thick, aluminum, gasketed grooved flange both sides | 2 |
| GENERIC | WR284 6 dB ATTEN | 90 | WR284 Fixed Attenuator, 6 dB, 5 Watts maximum, aluminum, 10 inches length, cover/choke flanges | 1 |
| GENERIC | WR284 half height wg adapter | 145 | WR284 Adapter to Half Height Waveguide, 18.75 inches length, aluminum | 1 |
| GERLING LABS | GL402 | 295 | WR284 Dual Directional Loop Coupler, 55 dB forward coupling/ 49 dB reflected coupling, N(f) coupled ports, 4 inch insertion length | 1 |
| HO/KEYSIGHT | S910A | 225 | WR284 Low Power Termination | 3 |
| HP/KEYSIGHT | S281A | 200 | WR284 x N(f) Adapter | 1 |
| HP/KEYSIGHT | S281A (modified) | 150 | WR284 x EIA-7/8 Adapter - aftermarket mod. to high power conn. | 1 |
| HP/KEYSIGHT | S370B | 150 | WR284 Fixed Attenuator, 6 dB, 1 Watt maximum | 1 |
| HP/KEYSIGHT | S370C | 150 | WR284 Fixed Attenuator, 10 dB, 1 Watt maximum | 1 |
| HP/KEYSIGHT | S370D | 150 | WR284 Fixed Attenuator, 20 dB, 1 Watt maximum | 1 |
| HP/KEYSIGHT | S375A | 250 | WR284 Direct Reading Variable Attenuator, 0-20 dB, 1 Watt max. | 4 |
| HP/KEYSIGHT | S382B | 450 | WR284 Precision Direct Reading Attenuator, 0-60 dB | 3 |
| HP/KEYSIGHT | S382C | 895 | WR284 Precision Direct Reading Attenuator, 0-60 dB, with phase reference | 2 |
| HP/KEYSIGHT | S486A | 275 | WR284 Thermistor Mount, for HP 432 series power meters | 2 |
| HP/KEYSIGHT | S750D | 250 | WR284 4-Port Crossguide Coupler, 20 dB coupling | 2 |
| HP/KEYSIGHT | S752C | 795 | WR284 Directional Coupler, 10 dB coupling | 1 |
| HP/KEYSIGHT | S840A | 135 | WR284 Series (E-Plane) Tee | 1 |
| HP/KEYSIGHT | S870A | 265 | WR284 Slide Screw Tuner, uncalibrated drives | 2 |
| HP/KEYSIGHT | S912A | 295 | WR284 Medium Power Term., 100 Watts avg./ 100 kW pk, 1.1 VSWR | 1 |
| HP/KEYSIGHT | S920A | 295 | WR284 Adjustable Short, uncalibrated drive | 2 |
| ITT | 135103-1 | 425 | CPR284 Sidewall Directional Coupler, 60 dB, N(f) coupled port, 2.7-3.0 GHz, 18.25 inches length, aluminum construction | 1 |
| MDL | 284AC106-2E | 175 | WR284 (choke flange) x N(f) Adapter, aluminumb body | 1 |
| MDL | 284AC46-2E-20P | 175 | WR284 (choke flange) x N(f) Adapter | 1 |
| MDL | 284AC86-F | 200 | CMR284 x SMA(f) Adapter, silver plated brass | 2 |
| MICROTECH | 226153 | 95 | WR284 Jacketed Flex Section, 6.75 inches length, aluminum | 4 |
| MICROWAVE ASSOC. | MA8K574 | 195 | CPR284 Circulator, 20 dB isolation, 3.03-3.17 GHz | 1 |
| MICROWAVE ASSOCIATES | MA-8P16 | 145 | WR284 Isolator, 20 dB, 2.66-2.76 GHz, 4.75 inches length | 2 |
| MICROWAVE DEVELOPMENT CO. | 57284-1223 | 295 | CPR284 Low Pass Filter, 3.5 GHz rolloff, >30 dB rejection above 5 GHz, 14 in. length | 1 |
| MICROWAVE ENG. | S70L-501 | 350 | CPR284 High Power Low Pass Filter, -3 dB @ 3.47 GHz, 36" length | 1 |
| NARDA | 1014 | 250 | WR284 4-Port Crossguide Coupler, 20 dB coupling | 1 |
| NARDA | 414-20 | 300 | WR284 Standard Reflection, 1.50 VSWR | 1 |
| NARDA | 614A | 200 | WR294 x N(f) Adapter | 2 |
| NARDA | 652-15 | 495 | WR284 Standasrd Gain Horn, 15 dBi gain mid-band | 1 |
| NARDA | 734 | 145 | WR284 Level Set Attenuator, 0.5-20 dB range, uncalibrated drive | 1 |
| OMEGA LABS | 282G | 250 | WR284 3-Port Crossguide Coupler, 30 dB coupling | 2 |
| OMEGA LABS | 6252K12 | 90 | CPR284 90 degree H-Plane Bend | 1 |
| PENN ENGINEERING | 102 | 175 | WR284 x N(f) Adapter | 1 |
| PENN ENGINEERING | 4556-55BM1 | 185 | CPR284 x CPR187 Taper Section, 8.12 inches length, silver plated brass | 2 |
| PENN ENGINEERING | 4556-55BM2 | 185 | CPR284 x CPR137 Taper Section, 12 inches length, silver plated brass | 1 |
| PRD | 175-A | 225 | WR284 Variable Attenuator, 0-40 dB, gage dial, 1W max | 1 |
| PRD | 309-A | 200 | WR284 Slide Screw Tuner, uncalibrated drives, lockable | 2 |
| RAYTHEON | CSH105G2 | 235 | CMR284 C irculator, 20 dB isolation, 3.25-3.35 GHz, antenna port is CMR284; transmitter and receiver ports are half-height flanged waveguide | 1 |
| RAYTHEON | ISH-60 | 420 | CPR284 High Power Liquid Cooled Isolator, 18 dB, 3.1-3.3 GHz, 0.5 gallons per minute min., 150m PSI max. input pressure, 500 W max., 11 inches length | 1 |
| SPERRY | 250 | 175 | WR284 x N(f) Adapter | 1 |
| STRUTHERS | 107207 | 265 | WR284 DPDT Transfer Switch, manual or 24VDC operation, proprietary 12-hole rectangular flange bolt pattern | 1 |
| SYSTRON DONNER | DBL-231 | 90 | WR284 30 degree H-Plane Bend | 2 |
| TECHNICRAFT | CMR284 12"flex | 135 | CMR284 Jacketed Flex Section, 12 inch length, aluminum | 4 |
| WAVELINE | 20591 | 195 | Half-Height WR284 Medium Power Load, 500 Watts average | 1 |
| WAVELINE | 20661 | 325 | CPR284 Short Loop Coupler, 30 dB, N(f,f) forward and reverse coupled ports, provided with one Narda 370BNM 5 Watt termination, 5.35 inches length, aluminum *NEW* | 1 |
| WAVELINE | 20951 | 195 | WR284 Half-Height Waveguide Load, 250 Watts average power | 1 |
| WAVELINE | 233 | 90 | WR284 90 degree H-Plane Bend, cover/choke flanges | 1 |
| WAVELINE | 239-2 | 90 | WR284 45 degree H-Plane Bend | 1 |
| WAVELINE | 394-B-AL | 145 | WR284 x WR187 Taper Section, 8 inches length, aluminum construction | 1 |
| WAVETRONICS | 2103-01 | 500 | WR284 Precision Direct Reading Attenuator, 0-60 dB | 1 |
| WESTINGHOUSE | 401250-1 | 225 | WR284 Dual Dir. Crossguide Cplr.,30 dB/N(f), 2.6-3.6GHz,choke fl | 1 |
| | | | WR340 WAVEGUIDE: 2.20-3.30 GHz | |
| CMT | RA340-N-F-16A-A-SP | 265 | WR340 (grooved flange) X N(f) Adapter | 2 |
| MICROWAVE DEVELOPMENT CORP. | 63340-N | 265 | WRT340 (groovred flange) x N(f) Adapter | 1 |
| VARIAN | 2.15 GHz filter | 150 | WR340 Band Pass Filter, 2150-2155.5 MHz, N(f) input, 17 x 11 x 7 inches | 1 |
| VARIAN | EW3-TCN | 235 | WR340 x N(f) Adapter | 1 |
| | | | WR430 WAVEGUIDE: 1.70-2.60 GHz | |
| 3 dBm, INC. | 62874-L-175 | 295 | WR430 (grooved flange) x N(f) Adapter | 1 |
| AIRTRON | A98-10462 | 90 | WR430 Unjacketed Flexible Section, 6 inches length | 1 |
| APOLLO MICROWAVES | 11905-2 | 175 | WR430 Short Body Termination, 10 Watts average power, 4.5 inches length | 1 |
| DIAMOND ANTENNA | 349 | 550 | WR430 Standard Gain Horn, 16.5 dBi gain mid-band | 1 |
| FXR/MICROLAB | F638A | 650 | WR430 Standard Gain Horn, 15.5 dBi gain mid-band | 1 |
| MICROWAVE DEVICES | WNF-2 | 325 | WR430 6-port Short Loop Coupler; four inident N(f) coupled ports at 50 dB, 50 dB, 50 dB, and 65 dB; two relected N(f) coupled ports at 53 dB and 53 dB; 7.92 inches length, aluminum | 1 |
| STRUTHERS | NB174M-20 | 595 | WR430 Dual Directional Coupler, 20 dB cou[pling, N(f) coupled ports, brass, 50 inches length | 1 |
| WAVELINE | 4399-CPRF | 650 | WR430 Standard Gain Horn, 15 dBi mid-band | 1 |
| | | | WR650 WAVEGUIDE: 1.12-1.70 GHz | |
| FXR/MICROLAB | L160B | 475 | WR650 Direct Reading Attenuator, 0-40 dB, 10 Watts maximum | 1 |
| GENERIC | WR650 E BEND | 125 | WR650 90 degree E-Plane Bend, 4.75 x 6.5 inch legs | 1 |
| NARDA | 646 | 900 | WR650 Standard Gain Horn, 16 dBi gain mid-band | 1 |
| RAYTHEON | 316792-1 | 95 | WR650 Pressure Window | 1 |
| | | | WR1500 WAVEGUIDE: 490-750 MHz | |
| MEGA INDUSTRIES | OG9Y7-17433-704 | 595 | WR1500 x N(f) Adapter, 490-750 MHz | 2 |
| | | | WRD180 DOUBLE RIDGE WAVEGUIDE: 18-40 GHz | |
| ANRITSU | 35WRD180K | 325 | WRD180 x 2.92mm male Adapter | 1 |
| BOONTON | 51972 | 650 | WRD180 Power Sensor, -50 to +10 dBm, 18-40 GHz,for Boonton meter | 2 |
| CMT | 10109781-10 | 295 | WRD180 x 2.92mm(f) Adapter, 1-1/2 inch dia. Bulkhead mounting | 1 |
| CMT | DBCC180-10 | 500 | WRD180 Directional Coupler, 10 dB coupling, 2.92mm(f) coupled port | 2 |
| CMT | DRS180-1C1C-4.0 | 95 | WRD180 Straight Section, 4 inches length | 2 |
| CMT | DRT180-1C1C-90-4 | 100 | WRD180 90 degree Left Hand Twist Section, 4 inches length | 2 |
| GENERIC | WRD180 10 dB ATT. | 95 | WRD180 10 dB Attenuator, 2.5 inches length, brass | 1 |
| HONEYWELL | FK/Ka-UT | 295 | WRD180 Mixer,RF/LO=18-40 GHz,LO=+3dBm,amplified IF=1-600MHz,15V | 1 |
| MAST MICROWAVE | LD-18500 | 165 | WRD180 Low Power Termination, 6 inches length | 4 |
| MAST MICROWAVE | WB-11850 | 95 | WRD180 90 degree E-Plane Bend | 4 |
| MAST MICROWAVE | WB-12850 | 95 | WRD180 90 degree H-Plane Bend | 7 |
| MAST MICROWAVE | WT-10850 | 95 | WRD180 90 degree Twist Section | 4 |
| MICROWAVE ENG. | R135 | 95 | WRD180 90 degree H-Plane Bend | 3 |
| MICROWAVE ENG. | R15-15.75-C1C1 | 135 | WRD180 Straight Section, 15-3/4 inches length | 1 |
| MICROWAVE ENG. | R15-16.25-C1C1 | 135 | WRD180 Straight Section, 16-1/4 inches length | 4 |
| MICROWAVE ENG. | R15-24-C1C1 | 165 | WRD180 Straight Section, 24 inches length | 3 |
| MICROWAVE ENG. | R165-3 | 500 | WRD180 Directional Coupler. 3 dB coupling | 6 |
| MICROWAVE ENG. | R165-3K | 500 | WRD180 Directional Coupler, 3 dB coupling,2.92mm(f) coupled port | 3 |
| MICROWAVE ENG. | R165-6K | 500 | WRD180 Directional Coupler, 6 dB coupling,2.92mm(f) coupled port | 1 |
| MICROWAVE ENG. | R45-K | 300 | WRD180 x 2.92mm(f) Adapter | 3 |
| MICROWAVE ENG. | R85-215 | 600 | WRD180 High Power Load, 300 Watts average, with -30 dB 2.92mm(f) sample port | 2 |
| MICROWAVE ENG. | RE45-K | 300 | WRD180 x 2.92mm(f) End Launch Adapter | 1 |
| WILTRON | SC3564 | 300 | WRD180 x 2.92mm(f) Adapter, 1-1/2 inch dia. bulkhead mounting | 7 |
| | | | WRD750 DOUBLE-RIDGE WAVEGUIDE: 7.5-18.0 GHz | |
| ADAMS RUSSELL | WRD750 Magic Tee | 250 | WRD750 Matched Hybrid Tee, 2 inches insertion length | 1 |
| AIRTRON | 433800 | 225 | WRD750 High Power Isolator, 18 dB, 11-15 GHz, 50 Watts | 1 |
| ATLANTIC MICROWAVE | WRD750 cplr | 325 | WRD750 Directional Coupler, 10 dB coupling, directivity 33 dB, N(f) coupled port, 23 inches length | 1 |
| ATLANTIC MICROWAVE | WRD750 sliding load | 195 | WRD750 Sliding Load, VSWR<1.03, 16.62 inch minimum length + 5.88 inch travel | 2 |
| CMT | 106096-1 | 275 | WRD750 Dual Directional Crossguide Coupler, 50 dB, SMA(f) cpld. | 2 |
| CMT | DDBCC-750-N-F-50 | 395 | WRD750 Dual Dirtectional Coupler, 50 dB coupling, N(f) coupled ports, flat flanges | 1 |
| CMT | HPM750-9.6 | 300 | WRD750 High Power Mismatch, 9.6 dB return loss, 350 Watts CW | 1 |
| CMT | HTD750-7.5-18 | 250 | WRD750 Matched Hybrid Tee | 1 |
| CMT | REB750-30 | 50 | WRD750 30 degree E-Plane Bend, aluminum, flat flanges | 1 |
| CMT | RHB750-2.50 | 75 | WRD750 90 degree H-Plane Bend, 2.5 inch bend radius, aluminum | 2 |
| ELETTRONICA spa | I-598-010-603 | 125 | WRD750 x SMA(f) Adapter | 1 |
| GENERIC | WRD750 pressurization | 35 | WRD750 Pressurization Section, 3/8 inch NPT inlet, 3 inch length, aluminum, flat/grooved flanges | 1 |
| LAVERICK | 3300/0477 | 250 | WRD750 High Power Load, 250 Watts average | 1 |
| LITTON AIRTRON | ARD7A-750-19.7 | 125 | WRD750 Straight Section, 19.7 inches length, aluminum, flat/grooved flanges | 1 |
| MAURY MICROWAVE | DA102A5 | 135 | WRD750 Standard Section, 5 inches length | 1 |
| MAURY MICROWAVE | DA209C | 175 | WRD750 x APC7 Adapter, 1.20 VSWR | 7 |
| MAURY MICROWAVE | DA213C | 175 | WRD750 x N(f) Adapter, 1.20 VSWR | 1 |
| MAURY MICROWAVE | DA301A | 200 | WRD750 Termination, 1.05 VSWR, 1 Watt maximum | 1 |
| MAURY MICROWAVE | DA313A | 250 | WRD750 Sliding Termination, 1.025 VSWR, 1 Watt maximum | 1 |
| MAURY MICROWAVE | DA340/344 set | 450 | WRD750 Offset & Flush Short set (5 pcs.): DA340A 0.65cm; DA340B 1.95cm; DA340C 0.30cm; DA340D 0.90cm; DA344A flush short | 1 |
| MICROTECH | 218053 | 110 | WRD750 Jacketed Flexible Waveguide Section, 15 in., flat/grooved | 25 |
| MICROWAVE DEVELOPMENT | 16750-118 | 175 | WRD750 Short Loop Coupler, 40 dB coupling, SMA(f) coupled port, 2.05 inches length, grooved flanges | 1 |
| MICROWAVE DEVELOPMENT CO. | 12750-1-7 | 350 | WRD750 Directional Coupler, 10 dB coupling, APC7 coupled port | 1 |
| MICROWAVE DEVELOPMENT CO. | 22750-7 | 145 | WRD750 x APC7 Adapter | 2 |
| MICROWAVE ENG. | R120 | 75 | WRD750 90 degree E-Plane Bend | 1 |
| MICROWAVE ENGINEERING | R160-3-3 | 225 | WRD750 Dual Directional Short Loop Coupler, 30 dB forward & reverse coupling, SMA(f) coupled ports, 21 inch length | 1 |
| MICROWAVE RESEARCH | R160-5-7 | 295 | WRD750 Directional Coupler, 50 dB, APC7 coupled port with N(f) adapter, flat flanges | 1 |
| MICROWAVE RESEARCH | R160-5N | 325 | WRD750 Directional Coupler, 50 dB, N(f) coupled port, flat flanges | 1 |
| MICROWAVE RESEARCH | R30-P | 195 | WRD750 x WR62 Taper Section, 4 inches length, aluminum | 1 |
| MICROWAVE RESEARCH | R600-3-3 | 175 | WRD750 Short Loop Coupler, 30 dB coupling, SMA(f) coupled port, 2.08 inches length | 2 |
| MICROWAVE RESEARCH | R600-3N | 175 | WRD750 Short Loop Coupler, 30 dB coupling, N(f) coupled port, 2.08 inches length | 1 |
| MICROWAVE RESEARCH | R80-175 | 225 | WRD750 High Power Load, 175 Watts average | 1 |
| MICROWAVE RESEARCH | R80-L | 145 | WRD750 Low Power Termination, VSWR <1.04 | 3 |
| MICROWAVE RESEARCH | R80-X | 250 | WRD750 High Power Load, 200 Watts average | 3 |
| MICROWAVE RESEARCH | R90-3N | 195 | WRD750 3-port (terminated) Crossguide Coupler, 30 dB, N(f) coupled port | 1 |
| MICROWAVE RESEARCH | WD750B | 295 | WRD750 Liquid Cooled Load, 1000 Watts average power dissipaion with 1 GPM flow, -40 dB coupled port N(f) | 2 |
| MW. DEVELOPMENT CO. | 12750-10 | 350 | WRD750 Directional Coupler, 10 dB, N(f) coupled port | 3 |
| MW. DEVELOPMENT CO. | 12750-2N | 350 | WRD750 Directional Coupler, 20 dB, N(f) coupled port | 1 |
| MW. DEVELOPMENT CO. | 23475-75 | 150 | WRD475 x WRD750 Taper Section, 6 inches length | 1 |
| MW. ENGINEERING | R40-438 | 150 | WRD750 x SMA(m) Adapter *NEW* | 1 |
| MW.DEVELOPMENT CO. | 21750-L | 145 | WRD750 Low Power Termination, VSWR <1.05 | 1 |
| NORTHROP GRUMMAN | 4828C48H01 | 250 | WRD750 Medium Power Load, 200 Watts average | 1 |
| NURAD | 1530-D-101-1 | 225 | WRD750 Horn Antenna, 13 dBi gain | 1 |
| NURAD TECHNOLOGIES | 370-D-017-1 | 225 | WRD750 Horn Antenna, 13 dBi gain mid-band *military nomenclature AS-2382/ALQ* | 1 |
| OMNI-SPECTRA | 2000-6275-00 | 150 | WRD750 x SMA(f) Adapter, VSWR 1.25 maximum *NEW* | 23 |
| SEDCO | 0477004-1 | 145 | WRD750 Short Loop Coupler, 26 dB coupling, directivity 16 dB, SMA(f) coupled port | 1 |
| TECHNICRAFT | TDR-14011-10 | 350 | WRD750 Directional Coupler, 10 dB coupling, SMA(f) coupled port | 2 |
| TECHNICRAFT | TDR-14120 | 45 | WRD750 170 degree H-Plane Bend, flat/grooved flanges | 30 |
| TECHNICRAFT | TDR-14133 | 45 | WRD750 80 degree H-Plane Bend, flat/grooved flanges | 15 |
| TECHNICRAFT | TDR-14402 | 60 | WRD750 90 degree E-Plane Bend, attached 2.3x2.9" bulkhead plate | 1 |
| TECHNICRAFT' | TDR-14012 | 145 | WRD750 Low Power Termination, VSWR <1.05 | 4 |
| WAVELINE | WRD75-78-E | 350 | WRD750 Manual DPDT Transfer Switch, 4-port, E-Plane | 1 |
| | | | WRD650 WAVEGUIDE: 6.5-18.0 GHz | |
| ATLANTIC MICROWAVE | WRD650 cplr | 325 | WRD650 Directional Coupler, 10 dB coupling, directivity 33 dB, N(f) coupled port, 23 inches length | 1 |
| CMT | AR650-07 | 85 | WRD650 7 dB Fixed Attenuator, 1 Watt maximum | 1 |
| CMT | DRCC-650-3-N-F | 195 | WRD650 3-Port Crossguide Coupler, 30 dB coupling, N(f) coupled port | 2 |
| CMT | DRPS650-1-TNC | 125 | WRD650 Sampling Coupler, 30 dB, TNC(f) coupled port, 2 in.length | 1 |
| CMT | DRPS650-40 | 125 | WRD650 Sampling Coupler, 40 dB, TNC(f) coupled port, 2 in.length | 3 |
| CMT | DRS650-2 | 60 | WRD650 Straight Section, 2 inches length | 4 |
| CMT | HPTAC650-2C | 375 | WRD650 High Power Load, 750 Watts average, with 115VAC fan | 1 |
| CMT | LPT650 | 150 | WRD650 Low Power Termination, 5 Watts maximum, 1.10 VSWR | 11 |
| CMT | MPT-650 | 275 | WRD650 Medium Power Load, 175 Watts average | 1 |
| CMT | REB650-2G2G-6.7 | 85 | WRD650 90 degree E-Plane Bend, 6.7 inch legs, grooved flanges | 1 |
| CMT | REB650-3-3 | 75 | WRD650 90 degree E-Plane Bend, flat/grooved flanges | 3 |
| CMT | RHB650-2-2 | 75 | WRD650 90 degree H-Plane Bend, flat flanges | 6 |
| CMT | WRD650 7 dB att. | 65 | WRD650 7 dB Fixed Attenuator, 6 inches length | 1 |
| CMT | WT650-102A | 185 | WRD650 x WR102 Waveguide Taper, 6-1/2 inches length | 1 |
| MACOM | 3459-001 | 375 | WRD650 Dual Directional Coupler, 40 dB forward coupling/ 30 dB reverse coupling, SMA(f) coupled ports, grooved/flat flasnges, 11.5 inches length | 5 |
| MAURY MICROWAVE | DA340B | 100 | WRD650 1.500cm (5/8-wavelength) Offset Short | 1 |
| MICROGUIDE | DRT650/102 | 185 | WRD650 x WR102 Waveguide Taper, 4 inches length | 1 |
| MICROGUIDE | SRL-4 | 85 | WRD650 Straight Section, 4 inches length | 1 |
| MICROWAVE DEVELOPMENT CO. | 3459-001 | 375 | WRD650 Dual Directional Coupler, 40 dB forward coupling/ 30 dB reverse coupling,, SMA(f) coupled ports, grooved/flat flanges, 11.5 inchesv length | 3 |
| MICROWAVE ENG. | R37-247 | 185 | WRD650 x WRD475 Taper Section, 6 inches length | 1 |
| MICROWAVE ENG. | R387-103 | 235 | WRD650 SPDT Switch, manual or 24VDC motor operation, latching | 1 |
| MICROWAVE ENG. | WRD650 magic tee | 245 | WRD650 Matched Hybrid Tee, aluminum frame, grooved flanges, 2 x 2 x 2 inches dimension | 2 |
| MICROWAVE ENGINEERING | R607-35N-C2 | 185 | WRD650 Short Loop Coupler, 35 dB coupling, directivity >15 dB, N(f) coupled port, 2.06 inch length | 2 |
| MICROWAVE RESEARCH | 650-51 | 185 | WRD650 x WRD475 Tapered Transition, 5 inches length | 1 |
| MICROWAVE RESEARCH | DRT650/102 | 145 | WRD650 x WR102 Taper Section, 4 inches length | 1 |
| MICROWAVE RESEARCH | R17-9-C1C1 | 75 | WRD650 Straight Section, 9 inches length | 1 |
| MICROWAVE RESEARCH | R87-X | 250 | WRD650 High Power Load, 200 Watts average | 1 |
| MW. DEVELOPMENT CO. | 12650-5N | 325 | WRD650 Directional Coupler, 50 dB coupling, N(f) coupled port | 1 |
| MW. DEVELOPMENT CO. | 20650-4-S | 125 | WRD650 Sampling Coupler, 40 dB coupling, SMA(f) coupled port | 6 |
| MW. DEVELOPMENT CO. | 21650-136 | 275 | WRD650 High Power Termination, 300 Watts average power | 2 |
| MW. DEVELOPMENT CO. | 21650-H | 300 | WRD650 High Power Termination, 1000 Watts average power | 1 |
| MW. DEVELOPMENT CO. | 21650-L | 145 | WRD650 Low Power Termination | 2 |
| MW. DEVELOPMENT CO. | 23475-650 | 185 | WRD650 x WRD475 Taper Transition, 6 inches length | 1 |
| MW. DEVELOPMENT CO. | 24650-H | 75 | WRD650 90 degree H-Plane Bend | 2 |
| MW. DEVELOPMENT CO. | 24650-ME | 75 | WRD650 90 degree E-Plane Bend | 2 |
| MW. DEVELOPMENT CO. | 2488277 | 135 | WRD650 Short Loop Dir. Coupler, 40 dB coupling, SMA(f) coupled | 7 |
| MW. DEVELOPMENT CO. | 33650-10 | 65 | WRD650 Straight Section, 2 inches length | 5 |
| NEICO MICROWAVE | 21051-2G | 75 | WRD650 90 degree H-Plane Bend | 9 |
| NEICO MICROWAVE | 21161-1 | 185 | WRD650 x WR102 Waveguide Taper, 6-1/2 inches length | 2 |
| NOVAK | W650FH1 | 235 | WRD650 Manual or Motor Driven SPDT Switch, failsafe, 28VDC | 1 |
| RAYTHEON | WRD650D | 295 | WRD650 High Power Water Cooled Load, 500 Watts average power | 3 |
| TECHNICRAFT | 19650-133 | 185 | WRD650 Band Pass Filter, 6.5-10.0 GHz, 12-3/4 inches length; -3 dB @ 6.23 & 10.19 GHz; -50 dB @ 5.96 & 12.03 GHz | 1 |
| | | | WRD580 WAVEGUIDE: 5.8-16.0 GHz | |
| ADVANCED MW. COMP. | 112TR580DR | 175 | WRD580 (flat flange) x CPR112 (grooved flange) Taper, 5.7 in. | 12 |
| ADVANCED MW. COMP. | 112TR580DR-1 | 175 | WRD580 (grooved flange) x CPR112 (grooved flange) Taper, 5.7 in. | 2 |
| ADVANCED MW. COMP. | 3037003-016 | 175 | WRD580 (flat flange) x CPR137 (grooved flange) Taper, 5.7 in. | 1 |
| APOLLO MICROWAVES | 14975 | 185 | WRD580 x CPR137G (grooved flange) Stepped Taper Transition, 2.14 inches length, aluminum | 1 |
| APOLLO MICROWAVES | WRD580 x CPR112G | 90 | WRD580 x CPR112G Step Transition, aluminum, 0.8 inch length | 1 |
| ATLANTIC MICROWAVE | 3037003 | 85 | WRD580 90 degree E-Plane Bend, flat/grooved flanges | 2 |
| ATLANTIC MICROWAVE | AMC112-TR580 | 145 | WRD580 x CPR112 (grooved flange) Taper, 5.7" length | 13 |
| ATLANTIC MICROWAVE | AMC580-FLT-6A | 85 | WRD580 Jacketed Flexible Waveguide Section, 6 in., flat/grooved | 2 |
| CMT | 1062310 | 350 | WRD580 Dual Directional Coupler, 30 dB and 40 dB coupling on SMA(f) coupled ports, 12.75 inches length, grooved flanges | 1 |
| CMT | DBCC580-N-F-50-2G-2G-SP | 325 | WRD580 Directional Coupler, 50 dB coupling, N(f) coupled port, grooved flanges | 1 |
| CMT | DFG580-16-2G2G | 135 | WRD580 Jacketed Flexible Waveguide Section, 16 in. length *NEW* | 1 |
| CMT | DFG580-3-1G1G | 85 | WRD580 Jacketed Flexible Waveguide Section, 3 in. length *NEW* | 1 |
| CMT | DRS580-3C-3C-2.75 | 60 | WRD580 Straight Section, 2.75 inch length, aluminum, flat flanges | 1 |
| CMT | ST580-2 | 65 | WRD580 Straight Section, 2 in. length, flat/grooved flanges*NEW* | 6 |
| GENERIC | WRD580 BLKD | 35 | WRD580 Bulkhead, cover/grooved flanges, 3/4 inch length | 1 |
| GENERIC | WRD580 FLEX | 45 | WRD580 Unjacketed Flex Section, grooved flanges, 1-1/2 in.length | 1 |
| LOGUS MICROWAVE | LWR580-BSL93 | 195 | WRD580 DPDT Transfer Switch, 15 VDC coil, with manual overide | 1 |
| LOGUS MICROWAVE | MWDPR580BSL2 | 195 | WRD580 Motorized DPDT Transfer Switch, 28VDC, with parallel SMA(f) DPDT switching | 2 |
| LOGUS MICROWAVE | MWDPR580BSL2X14 | 195 | WRD580 DPDT Transdfer Switch, 28 VDC, with parallel N(f) DPDT switching | 1 |
| MICROWAVE ENG. | R48-NH-G3 | 165 | WRD580 x N(f) Adapter | 1 |
| MICROWAVE RESEARCH | WRD580 Load | 195 | WRD580 300 Watt Load | 1 |
| SECTOR MICROWAVE | 58AP-2 | 195 | WRD580 DPDT Transfer Switch, 28 VDC | 1 |
| TECHNICRAFT | R178S-2 | 50 | WRD580 Flexible Waveguide Section, 2 inches length, grooved fl's | 2 |
| | | | WRD475 DOUBLE-RIDGE WAVEGUIDE: 4.75-11.0 GHz | |
| AIRTRON | AFD-7B-475-5.50 | 85 | WRD475 Jacketed Flex Section, 5.5 inches length, flat/grooved fl | 1 |
| AIRTRON | ARDT-7A-475-5.5 | 75 | WRD475 90 degree Twist Section, 5.5 in. length, flat/grooved fl | 1 |
| BOGART | GE7733189P2 | 100 | WRD500 x WR187 (choke flange) Taper Section, 8 in. length *NEW* | 8 |
| CMT | WT475-112-6 | 150 | WRD475 x CPR112 Taper Section, 6 inches length, aluminum | 1 |
| CMT | WT475-112-8 | 150 | WRD475 x CPR112 Taper Section, 8 inches length, aluminum | 1 |
| MAURY MICROWAVE | DB209A | 150 | WRD475 x APC7 Adapter | 2 |
| MAURY MICROWAVE | DB313A | 195 | WRD475 Sliding Termination, <1.01 VSWR typical | 1 |
| MAURY MICROWAVE | DB340A/B/C/D | 200 | Set of four WRD475 Offset Shorts, 0.45/ 1.0/ 1.35/ 3.0 cm offset | 1 |
| MAURY MICROWAVE | DB7005A | 1250 | WRD475 Calibration Kit:adapters;load;sliding load;offsets;short | 1 |
| MICROWAVE ENG. | R171-8 | 75 | WRD475 Jacketed Flexible Waveguide Section, 8 in. length | 1 |
| MICROWAVE ENG.CORP. | R81-X | 350 | WRD475 High Power Load, 600 Watts average | 6 |
| MICROWAVE RESEARCH | R121-1.25 | 75 | WRD475 90 degree E-Plane Bend, 1.25 inch bend radius | 5 |
| MICROWAVE RESEARCH | R121-1.98 | 75 | WRD475 90 degree E-Plane Bend, 1.98 inch bend radius | 2 |
| MICROWAVE RESEARCH | R1215-1.98 | 75 | WRD475 45 degree E-Plane Bend, 1.98 inch bend radius | 1 |
| MICROWAVE RESEARCH | R131-H | 75 | WRD475 90 degree H-Plane Bend | 1 |
| MICROWAVE RESEARCH | R151 | 65 | WRD475 90 degree Twist Section, 5.4 inches length | 1 |
| MICROWAVE RESEARCH | R161-5N | 350 | WRD475 Directional Coupler, 50 dB coupling, N(f) coupled port, 18" length | 1 |
| MICROWAVE RESEARCH | R31-G | 150 | WRD475 x WR187 Waveguide Taper, 5.75 inches length | 1 |
| MICROWAVE RESEARCH | R31-W | 150 | WRD475 x WR102 Waveguide Taper, 6 inches length | 1 |
| MICROWAVE RESEARCH | R31-X | 150 | WRD475 x WR90 Waveguide Taper, 6 inches length | 1 |
| MICROWAVE RESEARCH | R41-NA | 135 | WRD475 x N(f) Adapter | 3 |
| MICROWAVE RESEARCH | R50-51 | 150 | WRD475 x WRD750 Waveguide Taper, 5 inches length | 1 |
| MICROWAVE RESEARCH | R601-5N | 125 | WRD475 Short Loop Coupler, 50 dB, N(f) coupled port | 2 |
| MICROWAVE RESEARCH | R81-J | 150 | WRD475 x CPR137 Waveguide Taper, 5.5 inches length | 1 |
| MICROWAVE RESEARCH | R81-L | 135 | WRD475 Low Power Termination | 7 |
| MICROWAVE RESEARCH | R81-LS | 195 | WRD475 Moving Load | 2 |
| MICROWAVE RESEARCH | R91-147 | 200 | WRD475 3-Port Crossguide Coupler, 50 dB, N(f) coupled arm | 1 |
| MICROWAVE RESEARCH | R91-5N | 185 | WRD475 3-Port Crossguide Coupler, 50 dB, N(f) coupled arm | 5 |
| MICROWAVE RESEARCH | WRD475 dir.cplr. | 295 | WRD475 Directional Coupler, 10 dB coupling, APC7 or N(f) coupled port, 24" length | 1 |
| MICROWAVE RESEARCH | WRD475 sampler | 100 | WRD475 Sampling Coupler, 50 dB, N(f) coupled port, flat/grooved | 1 |
| MICROWAVE RESOURCES | WRD-475-C | 225 | WRD475 Dual Dir. Crossguide Coupler,-50 dB fwd Nf/-35 dB rev Nf | 1 |
| MW. DEVELOPMENT CO. | 22475-T | 135 | WRD475 x TNC(f) Adapter | 1 |
| MW. DEVELOPMENT CO. | 29475-107 | 40 | WRD475 Bulkhead Feedthru, 2.69" length; 3.25"x2.75" 4-hole mount | 9 |
| OMEGA LABS | BE9-475 | 75 | WRD475 90 degree E-Plane Bend | 1 |
| TECHNICRAFT | TDFT-22002 | 60 | WRD475 Jacketed Flexible Section, 2.5 in.length, grooved flanges | 5 |
| TECHNICRAFT | TDFT-22005 | 135 | WRD475 Jacketed Flexible Waveguide Section, 15 in. length | 2 |
| TECHNICRAFT | TDFT-22042-24-N | 185 | WRD475 Jacketed Flex waveguide, 24 inches, flat/grooved flanges | 1 |
| TECHNICRAFT | TDFT-22071 | 100 | WRD475 Twistable Flexible Waveguide, 9.75 inches length, grooved flanges | 5 |
| TECHNICRAFT | TDR-22001-10 | 350 | WRD475 Directional Coupler, 10 dB, N(f) coupled arm, 25" length | 2 |
| TECHNICRAFT | TDR-22002 | 135 | WRD475 Low Power Termination | 6 |
| TECHNICRAFT | TDR-22023 | 50 | WRD475 Press. Section, 1.25" length, 1/4" inlet, flat/grooved | 1 |
| TECHNICRAFT | TDR-22202 | 65 | WRD475 90 degree E-Plane Bend | 2 |
| TECHNICRAFT | TDR-22C017 | 135 | WRD475 x APC7 Adapter | 1 |
| TECHNICRAFT | TDRI-422000 | 150 | WRD475 x WRD750 Waveguide Taper, 6 inches length | 1 |
| TECHNICRAFT | TDS-20006 | 75 | WRD475 Jacketed Flexible Section, 6 in.length, flat/grooved fl's | 1 |
| TECHNICRAFT | WRD475 cover | 15 | WRD475 Aluminum Cover Plate, with rubber gasket | 10 |
| TECHNICRAFT | WRD475 press.window | 60 | WRD475 Pressure Window, grooved/flat flanges, 0.17 inch thick | 5 |
| TECHNICRAFT | WRD475-NF | 125 | WRD475 x N(f) Adapter | 1 |
| | | | WRD350 DOUBLE-RIDGE WAVEGUIDE: 3.5-8.2 GHz | |
| CMT | DRPW350-2C-2G | 165 | WRD350 Pressure Window, aluminum, flat/grooved flanges, 30 PSI max., 1.10 VSWR, 1000 Watts | 1 |
| CMT | DRPW350-2C-2G | 135 | WRD350 Pressure Window, 30 PSI, 1000 Watts, 1.10 VSWR, flat/grooved flanges | 1 |
| GENERIC | WRD350-WR187 | 115 | WRD350 to WR187 Flange Adapter, 2.17 inch length, aluminum, has step transition to WR187 at UG149/U (WR187) flange side | 1 |
| MAURY MICROWAVE | DC7006B-S13,S15 | 1500 | WRD350 VNA Calibration Kit, with HP 8510 tape & HP 8719/8720/8722 disk | 1 |
| MICROTECH | 218197 | 95 | WRD350 90 degree E-Plane Bend, grooved flanges | 4 |
| MICROTECH | 218201 | 225 | WRD350 Jacketed Flex Waveguide Section, 30.7 inches,flat/grooved | 1 |
| MICROWAVE RESEARCH | R122 | 75 | WRD350 90 degree E-Plane Bend, flat & grooved flanges | 1 |
| MICROWAVE RESEARCH | R122-C1C1 | 95 | WRD350 90 degree E-Plane Bend, flat flanges | 1 |
| TECHNICRAFT | TTD-29301 | 395 | WRD350 Slotted Line with carriage and N(f) probe | 1 |
| TECHNICRAFT | WRD350 E 90 | 95 | WRD350 90 degree E-Plane Bend, flat & grooved flanges | 1 |
| | | | WRD250 DOUBLE-RIDGE WAVEGUIDE: 2.5-7.5 GHz | |
| ATM | 250-441EM-NF | 650 | WRD250 Horn Antenna, 15 dBi gain mid-band, 2.5-7.5 GHz, with adapter to N female attached to horn | 1 |
| | | | WRD200 DOUBLE-RIDGE WAVEGUIDE: 2.0-4.8 GHz | |
| CMT | DRPS200-1-NM | 225 | WRD200 Sampling Coupler, 30 dB, N(m) coupled port, 3 in. length | 1 |
