ASK*--PLEASE CONTACT US
| MANUFACTURER |
MODEL |
PRICE |
DESCRIPTION |
QUANTITY* |
| | | | WR28 WAVEGUIDE: 26.5-40.0 GHz | |
| AEROWAVE | 28-1845 | 50 | WR28 45 degree E-Plane Bend | 1 |
| AEROWAVE | 28-2000 | 110 | WR28 Low Power Termination, 1.1 Watt maximum, 1.05 VSWR | 1 |
| AEROWAVE | 28-3000/10 | 145 | WR28 Directional Coupler. 10 dB coupling | 1 |
| AIRTRON | AF-2B-028-12 | 90 | WR28 Jacketed Flexible Waveguide, 12 inches length, silver/brass | 1 |
| AIRTRON | AF-3B-028-8 | 60 | WR28 Jacketed Flexible Waveguide Section, 8 inches length, silver/brass, cover/choke flanges | 1 |
| ANDREW | F028PA-0360B | 195 | WR28 Jacketed Flexible Waveguide, 36 in.length, cover/choke *new old stock* | 2 |
| ANDREW | F028PB-0240KS | 175 | WR28 Jacketed Flexible/ Twistable Waveguide, 24 in.,cov/ch *new old stock* | 11 |
| ANRITSU | 26UA28 | 185 | WR28 Precision Low Power Termination | 1 |
| APOLLO MICROWAVES | 17144 | 265 | WR28 UG600 choke flange x 2.4mm(f) Adapter | 2 |
| ARGUS ET | 1IW28-38-1 | 65 | WR28 Isolator, 20 dB, 37-40 GHz, 1/2 inch insertion length | 1 |
| ARRA | 28-720-90 | 175 | WR28 Variable Phase Shifter, 0-90 degrees, uncalibrated drive, 2.38 inch length | 2 |
| ATLANTIC MICROWAVE | AMC-1466 | 90 | WR28 Orthomode Tee Adapter, UG599/U flanges on thru-line, 0.21 x 0.21 inch square waveguide on orthomode arm, 1 inch length, aluninum | 1 |
| ATLANTIC MICROWAVE | WR28 - WR62 taper | 175 | WR28 x WR62 Taper, 6 inches length, aluminum, split block construction | 2 |
| ATM | 28-320A-3-6-6-6-6 | 250 | WR28 Directional Coupler, 3 dB coupling, coupled arm port termination (28-720-6) can be moved between forward and reverse coupling ports, 5.55 inches length | 1 |
| BAYTRON | 28-1201-2.5 | 35 | WR28 Straight Section, 2.5 inches length | 1 |
| BAYTRON | 28-1201-3.0 | 35 | WR28 Straight Section, 3 inches length | 1 |
| BAYTRON | 3-28-300/10 | 235 | WR28 Directional Coupler, 10 dB coupling, directivity >20 dB | 2 |
| BAYTRON | 3Ka-65 | 60 | WR28 Pressurization Section, 2-1/2 in length, 0-30 PSI gage | 1 |
| BAYTRON | 3Ka-80/60 | 50 | WR28 60 degree H-Plane Bend | 1 |
| CMT | 1062690 | 115 | WR28 x 2.92mm male Adapter, incorporates mitre E Plane bend, 2.65 x 3.85 inch leg lengths *new old stock* | 6 |
| CMT | 58P33762Y | 175 | WR28 Straight Section, 72 inches. length, aluminum, cover/choke flanges | 1 |
| CMT | AR28-3-1A1A-A | 100 | WR28 3 dB Fixed Attenuator, 1 Watt maximum *new old stock* | 17 |
| CMT | AR28-6-1B1B-C | 100 | WR28 6 dB Fixed Attenuator, 1 Watt maximum | 1 |
| CMT | LPTS-28 | 195 | WR28 Sliding Termination, uncalibrated drive with locking screw | 1 |
| CMT | RAE28-K-M-1A-A | 275 | WR28 x 2.92mm(m) End Launch Adapter | 1 |
| CMT | RBC28-10-1A1A1A-1 | 250 | WR28 Directional Coupler, 10 dB coupling | 13 |
| CMT | RBC28-20-1A1A1A-1 | 250 | WR28 Directional Coupler, 20 dB coupling | 6 |
| CMT | RCC28-2-20 | 185 | WR28 3-Port Crossguide Coupler, 20 dB coupling *new old stock* | 5 |
| CMT | REB28-1A1A-1.5-1.5-A | 50 | WR28 90 degree E-Plane Bend, 1.5 inch bend radius, aluminum | 15 |
| CMT | RFG28-18-7B7B-HP | 135 | WR28 Unjacketed Flexible Section, 18 inches length, brass | 1 |
| CMT | RFG28-24-1A-1A-NSR | 165 | WR28 Jacketed Flexible Waveguide, 24 inches length, aluminum | 1 |
| CMT | RFG28-6-1A-8A-NSR | 60 | WR28 Jacketed Flexible Waveguide, 6 inches length, aluminum, cover/ choke flanges | 1 |
| CMT | RHB28-1A-1A-1.5 | 50 | WR28 90 degree H-Plane Bend, 1.5 inch bend radius, cover flanges, aluminum | 37 |
| CMT | RHB28-1B2B-1.12 | 50 | WR28 90 degree H-Plane Bend, brass, 1.12 inch bend radius | 3 |
| CMT | RHB28-1B-8B | 50 | WR28 90 degree H-Plane Bend, 1 inch bend radius, cover/choke flanges, brass | 1 |
| CMT | RS28-1A1A-4.0-A | 45 | WR28 Straight section, 4 inches length, aluminum | 2 |
| CMT | RS28-1A1A-6.0-A | 50 | WR28 Straight Section, 6 inches length, aluminum *new old stock* | 57 |
| CMT | RS28-1A1A-8.0-A | 60 | WR28 Straight Section, 8 inches length, aluminum *new old stock* | 25 |
| CMT | RS28-1B1B-6.0-C | 50 | WR28 Straight Section, 6 inches length, brass | 4 |
| CMT | RT28-1A-1A-90-3-A | 60 | WR28 90 degree Twist Section, 3 inches length, aluminum' | 3 |
| CMT | RT28-1B-1B-2-C | 60 | WR28 90 degree Twist Section, 2 inches length, brass | 6 |
| CMT | TX28-1A-SP | 325 | WR28 Standard Gain Horn, 20.8 dBi gain mid-band, with 2.25 x 1.88 inch mounting flange at aperture | 2 |
| CMT | WCK-28 | 1095 | WR28 Waveguide Calibration Kit: (2) PLPT-28 fixed terminations; (2) RA28-K-F-1A-A adapters to 2.92mm f; (1 each) WOS-28-1/8 & -3/8 1/8- & 3/8-wavelength offset shorts | 1 |
| CMT | WR28 74.38" | 175 | WR28 Straight Section, 6 ft. 2-3/8 inch length, aluminum, cover/choke flanges | 3 |
| COMTECH PST | 214002105E | 135 | WR28 Short Body Directional Couopler, 15 dB coupling, directivity >20 dB, 4 inches length, aluminum, all UG600/U choke flanges | 1 |
| DEMORNAY BONARDI | DBD-224 | 50 | WR28 90 degree E-Plane Bend | 1 |
| DEMORNAY BONARDI | DBD-274-3 | 60 | WR28 90 degree Twist Section, 3 inches length | 1 |
| DEMORNAY BONARDI | DBD-274-3-599/600 | 60 | WR28 90 degree Twist, 3 inches length, cover/choke flanges | 2 |
| DEMORNAY BONARDI | DBD-410 | 250 | WR28 Variable Attenuator, 0-40 dB, vernier drive | 3 |
| DEMORNAY BONARDI | DBD-825/DB-820 | 450 | WR28 Slotted Line, with carriage and detector | 1 |
| DEMORNAY BONARDI | DBD-915 | 250 | WR28 Variable Phase Shifter, 0-180 degrees, uncalibrated drive | 2 |
| DEMORNAY BONARDI | DBD-969 | 95 | WR28 Sliding Short, uncalibrated drive | 2 |
| DEMORNAY BONARDI | DBD-969-1 | 195 | WR28 Sliding Short, micrometer read | 1 |
| DIAMOND ANTENNA | 1145 | 195 | WR28 Rotary Joint, L-shape, 26.5-38.0 GHz, cover/choke flanges | 1 |
| DIAMOND ANTENNA | DIC-1108 | 100 | WR28 Low Power Termination, 1.05 VSWR, 0.5 Watt maximum | 1 |
| DORADO | HPL-28-50 | 195 | WR28 Medium Power Load, 50 Watts average power, 1.10 VSWR | 1 |
| DORADO INTERNATIONAL | GH-28-20 | 325 | WR28 Standard Gain Horn, 20 dBi gain mid-band | 1 |
| DORADO INTERNATIONAL | GH-28-25 | 395 | WR28 Standard Gain Horn, 25 dBi gain mid-band | 1 |
| DORADO INTERNATIONAL | WT-Ka | 185 | WR28 x WR42 Taper Section, 0.95 inch length | 1 |
| DORADO INTL. | 4CWY33-1 | 185 | WR28 Circulator, 18 dB isolation, 26.5-40 GHz, 0.5 dB insertion loss, 0.75 inch length | 10 |
| DORADO INTL. | 4IWN-39.2 | 65 | WR28 Isolator, 20 dB, 38.7-40 GHz, 1/2 inch insertion length | 3 |
| DORADO INTL. | 4IWY33-1 | 175 | WR28 Full Band Junction Isolator,26.5-40 GHz, 16 dB isolation, 0.5 dB insertion loss, 0.5 inch length | 10 |
| DORADO INTL. | BE-28 | 50 | WR28 90 degree E-Plane Bend | 20 |
| DORADO INTL. | BH-28 | 50 | WR28 90 degree H-Plane Bend | 17 |
| DORADO INTL. | DCG-28-03 | 165 | WR28 Directional Coupler, 3 dB coupling | 1 |
| DORADO INTL. | DCG-28-10 | 165 | WR28 Directional Coupler, 10 dB coupling | 3 |
| DORADO INTL. | FT-28 | 115 | WR28 Low Power Termination, 1 Watt maximum | 3 |
| DORADO INTL. | HPT-28 | 65 | WR28 H-Plane (Shunt) Tee, 1.96 inches length | 2 |
| DORADO INTL. | S-28-F | 50 | WR28 Straight Section, 5.87 inches length, gold flashed brass | 2 |
| DORADO INTL. | TW-28 | 60 | WR28 90 degree Twist Section, 2.96 inches length | 11 |
| DORADO INTL. | WR28 HYBRID TEE | 95 | WR28 Hybrid Tee, common port is SMA female | 1 |
| DUCOMMUN | FCF-28-01 | 145 | WR28 Circulator, 16 dB isolation, 26.5-40 GHz, 0.75 inch length | 1 |
| EIP | 2010404-02 | 195 | WR28 Remote Sensor, for EIP Frequency Counter, 26.5-40 GHz | 1 |
| EIP | 2030022 | 195 | WR28 Remote Sensor for EIP Frequency Counter, 26.5-40 GHz | 1 |
| ELMIKA | DC108/1E-6 | 135 | WR28 Directional Coupler, 6 dB coupling, 27-32 GHz, split block design, 6 inches length | 3 |
| EMERSON & CUMMINGS | 757D-E | 50 | WR28 90 degree E-Plane Bend, choke flanges | 1 |
| EMS WIRELESS | 38V22-22-1F | 65 | WR28 38 GHz vertical polarization Sectoral Horn Antenna, 8 in. length x 6 in. height x 1.2 in., aluminum | 1 |
| EPSILON LAMBDA | HW-28 | 50 | WR28 90 degree H-Plane Bend | 1 |
| FERROCOM | 031-339888 | 60 | WR28 Circulator, 20 dB isolation, 36.8-40 GHz | 6 |
| FERROCOM | 2976-3T | 60 | WR28 Junction Isolator, 20 dB, 28.3-31.0 GHz, 0.89 inch length | 2 |
| FLANN MICROWAVE | 22081-06 | 95 | WR28 Fixed Attenuator, 6 dB, 1 Watt maximum, 1.10 VSWR | 1 |
| FLANN MICROWAVE | 22093-KF22 | 325 | WR28 x 2.92mm(f) Adapter | 1 |
| FLANN MICROWAVE | 22110 | 895 | WR28 Precision Direct Reading Attenuator, 0-60 dB | 1 |
| FLANN MICROWAVE | 22130-10 | 350 | WR28 Directional Coupler, 10 dB coupling, directivity 33 dB | 2 |
| FLANN MICROWAVE | 22131-10 | 450 | WR28 Directional Coupler, 10 dB coupling, directivity 40 dB | 22 |
| FLANN MICROWAVE | 22170 | 110 | WR28 Short Body Low Power Termination, 200 mW, 1.10 VSWR | 1 |
| FLANN MICROWAVE | 22230 | 450 | WR28 3-Way Power Divider (broadwall coupler), 4.8 dB 3-way division ratio, 38 dB directivity, 228mm length | 2 |
| FLANN MICROWAVE | 22300-AA | 350 | WR28 Dual Directional Coupler, 10 dB coupling both directions, directivity 33 dB | 8 |
| FLANN MICROWAVE | 22410 | 95 | WR28 H-Plane Tee | 1 |
| FLANN MICROWAVE | 22441-100mm | 60 | WR28 Straight Section, 100mm length (3.94 inches) | 12 |
| FLANN MICROWAVE | 22441-190mm | 75 | WR28 Straight Section, 190mm length (7.48 inches) | 12 |
| FLANN MICROWAVE | 22441-300mm | 95 | WR28 Straight Section, 300mm length (11.81 inches) | 1 |
| FLANN MICROWAVE | 22441-8.25" | 85 | WR28 Straight Section, 8.25 inches length *new old stock* | 1 |
| FLANN MICROWAVE | 22450-90LH | 65 | WR28 90 degree Left Hand Twist, 54mm length, 1.035 VSWR | 7 |
| FLANN MICROWAVE | 22460-90 | 50 | WR28 90 degree E-Plane Bend, 38mm bend radius, 1.06 VSWR | 10 |
| FLANN MICROWAVE | 22470-90 | 50 | WR28 90 degree H-Plane Bend, 38mm bend radius, 1.06 VSWR | 10 |
| FXR/MICROLAB | U155AF | 195 | WR28 Direct Reading Variable Attenuator, 0.5-20 dB | 1 |
| FXR/MICROLAB | U175AF-25 | 165 | WR28 Flat Broadband Attenuator, 25 dB, 1 Watt average | 1 |
| FXR/MICROLAB | U206CF | 175 | WR28 Tunable Detector, positive polarity, 1N53 diode, BNC(f) output | 1 |
| FXR/MICROLAB | U312BF | 350 | WR28 E-H Plane Tuner, micrometer drives | 1 |
| FXR/MICROLAB | U501AF | 115 | WR28 Low Power Termination, 1/2 Watt maximum, 1.05 VSWR | 2 |
| FXR/MICROLAB | U510D | 175 | WR28 Standard Mismatch, VSWR 1.20, 300 mW maximum | 2 |
| FXR/MICROLAB | U610A | 185 | WR28 Standard Mismatch, VSWR=1.00 | 1 |
| FXR/MICROLAB | U610B | 185 | WR28 Standard Mismatch, VSWR=1.05 | 1 |
| FXR/MICROLAB | U622AF | 165 | WR28 Hybrid Tee | 4 |
| FXR/MICROLAB | U623BF | 50 | WR28 90 degree E-Plane Bend | 2 |
| FXR/MICROLAB | U624B | 50 | WR28 90 degree H-Plane Bend | 1 |
| FXR/MICROLAB | U624BF | 50 | WR28 90 degree H-Plane Bend | 4 |
| FXR/MICROLAB | U6251AF | 50 | WR28 Short 90 degree Twist Section, 0.5 inch length | 3 |
| FXR/MICROLAB | U625A5 | 50 | WR28 90 degree Twist Section, 2.58 inches length | 1 |
| FXR/MICROLAB | U630CF | 195 | WR28 Adjustable Short, micrometer drive | 3 |
| FXR/MICROLAB | U634AF-1 | 35 | WR28 Straight Section, 1 inch length, brass | 1 |
| FXR/MICROLAB | U634AF-1.5 | 35 | WR28 Straight Section, 1.5 inch length, brass | 1 |
| FXR/MICROLAB | U634AF-2 | 45 | WR28 Straight Section, 2 inches length, brass | 1 |
| FXR/MICROLAB | U634AF-4 | 50 | WR28 Straight Section, 4 inches length, brass | 2 |
| FXR/MICROLAB | U634AF-6 | 65 | WR28 Straight Section, 6 inches length, brass | 2 |
| FXR/MICROLAB | WF-0085 | 295 | WR28 High Power Loasd, 75 Watts average/ 100 kW peak *new old stock* | 1 |
| GABRIEL | WR28 flex 12" | 90 | WR28 Jacketed Flexible Waveguide, 12 inches length, brass | 1 |
| GAMMA-F | L-28256 | 150 | WR28 38 GHz High Pass Filter, 2.25 inches length | 1 |
| GENERAL MICROWAVE | A420C | 195 | WR28 Power Sensor, for General Microwave power meters | 1 |
| GENERIC | 31 GHz isol | 45 | WR28 Junction Isolator, 20 dB, 31.0-31.5 GHz, 0.75 inch insertion length | 2 |
| GENERIC | Sectoral Horn | 90 | WR28 Sectoral Horn Antenna, 3.3 inch length, 1.2 x 1.2 inch aperture, brass | 2 |
| GENERIC | WR28 1.56" | 25 | WR28 Straight Section, 1.56 inches length, brass | 2 |
| GENERIC | WR28 12.38" | 90 | WR28 Straight Section, 12.38 inches length, brass, cover/choke flanges | 1 |
| GENERIC | WR28 18" | 150 | WR28 Straight Section, 18 inches length, brass | 1 |
| GENERIC | WR28 3.13" | 30 | WR28 Straight Sectiion, 3.13 inches length, brass | 2 |
| GENERIC | WR28 32 GHz isolator | 45 | WR28 Junction Isolator, 18 dB, 31.4-32.8 GHz, 0.75 inch insertion length | 1 |
| GENERIC | WR28 38 GHz BPFL | 95 | WR28 Band Pass Filter, 35.5-40.0 GHz, 0.98 inch length | 1 |
| GENERIC | WR28 4" straight | 30 | WR28 Straight Section, 4 inches length, brass | 1 |
| GENERIC | WR28 4.35" | 30 | WR28 Straight Section, 4.35 inches length, brass | 1 |
| GENERIC | WR28 4.5" flex | 60 | WR28 Unjacketed Flexible Waveguide Section, 4.5 in. length, brass | 12 |
| GENERIC | WR28 4.5" straight (ch) | 30 | WR28 Straight Section, 4.5 inches length, aluminum,choke flanges | 7 |
| GENERIC | WR28 6" | 35 | WR28 Straight Section, 6 inches length, brass | 1 |
| GENERIC | WR28 6" straight | 35 | WR28 Straight Section, 6 inches length, aluminum, choke flanges | 1 |
| GENERIC | WR28 7" straight | 60 | WR28 Straight Section, 7 inches length, brass | 1 |
| GENERIC | WR28 8 dB atten. | 65 | WR28 Fixed Attenuator, 8 dB, 3 inches length | 1 |
| GENERIC | WR28 8.88" | 60 | WR28 Straight Section, 8.88 inches length, brass, cover/choke flanges | 1 |
| GENERIC | WR28 bulkhead | 35 | WR28 Bulkhead Adapter, UG600/U coke flanges both sides, on circular 2 inch diameter 8-hole flange, 0.3 inch thick, aluminum | 22 |
| GENERIC | WR28 bulkhead | 35 | WR28 Bulkhead Plate, 2.0 x 0.78 inch plate 0.5 inch thick, two hole mount, silver/brass | 1 |
| GENERIC | WR28 E 90 mitre | 20 | WR28 90 degree E-Plane Mitre Bend, 2-1/2 inch legs, aluminum | 14 |
| GENERIC | WR28 E bend | 25 | WR28 Assymetrical 90 degree E-Plane Bend, 1.55 x 1.05 inch legs, choke/choke flanges, silver plated brass | 52 |
| GENERIC | WR28 flex 24" | 95 | WR28 Unjacketed Flexible Waveguide Section, 24 inches length, brass | 1 |
| GENERIC | WR28 H 90 mitre | 25 | WR28 90 degree H-Plane Mitre Bend, 2-1/2 inch legs, aluminum | 9 |
| GENERIC | WR28 half height adapter | 60 | WR28 (UG600/U choke flange) x WR28 Half-Height Waveguide (modified UG599/U flange) Adapter, 5.12 inches length, brass | 1 |
| GENERIC | WR28 half height adapter | 60 | WR28 (UG600/U choke flange) x WR28 Half-Height Waveguide (modified UG599/U flange) Adapter, 3 inches length, brass | 1 |
| GENERIC | WR28 pickup horn | 40 | WR28 Panel Mounting Pickup Horn, 7 dBi gain, 0.5 inch thick on 1.3 x 1.3 inch plate, 1 x 1 inch hole centers, silver plate | 1 |
| GENERIC | WR28 twist | 50 | WR28 90 degree Twist Section, 4.60 inches length, cover/choke flanges | 1 |
| GENERIC | WR28 twist 90 | 50 | WR28 90 degree Twist Section, 3.2 inches length, silver/brass, cover/choke flanges | 1 |
| GHZ MICROWAVE | 200143-12B | 95 | WR28 Band Pass Filter, 38.588-38.888 GHz, 1.5 inch length | 1 |
| GHZ MICROWAVE | A6557-1 | 100 | WR28 Low Power Termination, 1.05 VSWR, 0.5 Watt maximum | 2 |
| GHZ MICROWAVE | A8959 | 100 | WR28 28.2 GHz High Pass Filter, 1.1 inch length | 2 |
| HITACHI | R3601 | 350 | WR28 3-Position 3-Port Manual Switch, H-Plane | 1 |
| HNL | R219-10 | 95 | WR28 Fixed Attenuator, 10 dB, brass, 4 inches length | 1 |
| HNL | SK-273 | 125 | WR28 x WR34 Single Step Transition, brass, 3.15 inches length | 1 |
| HP/KEYSIGHT | 11517A/19A/20A | 375 | Waveguide Mixer Set, 18.0-40.0 GHz coverage, for HP 8555A, 8565A | 2 |
| HP/KEYSIGHT | 11664D | 595 | WR28 Detector, for HP 8755/6/7 series scalar network analyzer | 1 |
| HP/KEYSIGHT | 11970A | 495 | WR28 Harmonic Mixer, 26.5-40 GHz, for use with Keysight analyzers | 6 |
| HP/KEYSIGHT | 11974A | 1695 | WR28 Preselected Mixer, 26.5-40 GHz, for HP spectrum analyzers, with power supply | 1 |
| HP/KEYSIGHT | 83554A | 1950 | WR28 Source Module, +7 dBm levelled, for HP sources | 1 |
| HP/KEYSIGHT | 83572-60071 | 500 | WR28 Directional Coupler, 10 dB coupling (same as R752C) | 1 |
| HP/KEYSIGHT | R11644A | 2500 | WR28 Calibration Kit, for Agilent network analyzers | 3 |
| HP/KEYSIGHT | R281A | 675 | WR28 x 2.4mm(f) Adapter, 1.13 VSWR | 15 |
| HP/KEYSIGHT | R281B | 675 | WR28 x 2.4mm(m) Adapter, 1.13 VSWR | 6 |
| HP/KEYSIGHT | R347B | 795 | WR28 Noise Source, 12 dB ENR, 26.5-40 GHz | 9 |
| HP/KEYSIGHT | R362A | 300 | WR28 Low Pass Filter, 47 GHz (-30 dB) cutoff | 11 |
| HP/KEYSIGHT | R365A | 395 | WR28 Full Band Isolator, 25 dB isolation, 1.5 dB insertion loss | 9 |
| HP/KEYSIGHT | R373D | 450 | WR28 Precision Attenuator, 20 dB, 500 mW max., 1.05 VSWR, accuracy 0.7 dB + ripple 0.7 dB max. | 5 |
| HP/KEYSIGHT | R373G | 450 | WR28 Precision Attenuator, 50 dB, 500 mW max., 1.05 VSWR, accuracy 1.0 dB + ripple0.7 dB max. | 1 |
| HP/KEYSIGHT | R375A | 375 | WR28 Direct Reading Variable Attenuator, 0-20 dB | 2 |
| HP/KEYSIGHT | R382A | 895 | WR28 Precision Direct Reading Attenuator, 0-50 dB, 26.5-40 GHz | 8 |
| HP/KEYSIGHT | R422A | 250 | WR28 Broadband Crystal Detector, negative polarity | 9 |
| HP/KEYSIGHT | R422C | 375 | WR28 Broadband Crystal Detector, negative polarity | 11 |
| HP/KEYSIGHT | R486A | 500 | WR28 Thermistor Mount, for HP 432 series power meters | 5 |
| HP/KEYSIGHT | R532A | 195 | WR28 Direct Reading Frequency Meter, 0.11% accuracy | 8 |
| HP/KEYSIGHT | R752A | 500 | WR28 Directional Coupler, 3 dB coupling | 11 |
| HP/KEYSIGHT | R752AS | 500 | WR28 Directional Coupler, 3 dB coupling, split block construction | 1 |
| HP/KEYSIGHT | R752C | 500 | WR28 Directional Coupler, 10 dB coupling | 12 |
| HP/KEYSIGHT | R752CS | 500 | WR28 Directional Coupler, 10 dB coupling, split block construction | 4 |
| HP/KEYSIGHT | R752D | 500 | WR28 Directional Coupler, 20 dB coupling | 10 |
| HP/KEYSIGHT | R752DS | 500 | WR28 Directional Coupler, 20 dB coupling, split block construction | 1 |
| HP/KEYSIGHT | R815B/814A/446B | 450 | WR28 Slotted Line, with carriage and detector | 2 |
| HP/KEYSIGHT | R8486A | 995 | WR28 Power Sensor, -30 to +20 dBm, 26.5-40 GHz | 2 |
| HP/KEYSIGHT | R8486D | 995 | WR28 Power Sensor, -70 to -20 dBm, 26.5-40 GHz | 2 |
| HP/KEYSIGHT | R870A | 250 | WR28 Slide Screw Tuner, micrometer horizontal drive, uncalibrated probe drive | 1 |
| HP/KEYSIGHT | R899A | 50 | WR28 Straight Section, 2.5cm length | 2 |
| HP/KEYSIGHT | R910A | 195 | WR28 Low Power Termination, 1 Watt maximum, 1.025 VSWR | 2 |
| HP/KEYSIGHT | R914A | 185 | WR28 Moving Load, 500mW, 1.01 VSWR, uncalibrated drive | 1 |
| HP/KEYSIGHT | R914B | 245 | WR28 Moving Load, 500 mW, 1.01 VSWR, uncalibrated drive | 19 |
| HP/KEYSIGHT | R914C | 375 | WR28 Moving Load, 500 mW, 1.01 VSWR, micrometer drive | 3 |
| HP/KEYSIGHT | R920B | 285 | WR28 Adjustable Short, micrometer drive | 1 |
| HP/KEYSIGHT | R920C | 350 | WR28 Adjustable Short, lockable micrometer drive | 2 |
| HP/KEYSIGHT | WR28 9.85" | 85 | WR28 Straight Section, 9.85 inches length | 1 |
| HP/KEYSIGHT | X910A (CMR) | 100 | CMR90 Low Power Termination, 0.5 Watt, 1.02 VSWR | 1 |
| HUGHES | 45111H-2000 | 325 | WR28 Full Band Isolator, 25 dB isolation, 1.5 dB insertion loss | 2 |
| HUGHES | 45141H-2000 | 125 | WR28 Junction Isolator, 20 dB isolation, 35-37 GHz | 2 |
| HUGHES | 45161H-2000 | 125 | WR28 Circulator, 20 dB isolation, 28.5-31.5 GHz | 1 |
| HUGHES | 45321H-2110 | 250 | WR28 Directional Coupler, 10 dB coupling | 2 |
| HUGHES | 45321H-2210 | 250 | WR28 Directional Coupler, 10 dB coupling; split block construction | 1 |
| HUGHES | 45321H-2310 | 395 | WR28 Directional Coupler, 10 dB coupling; split block construction | 2 |
| HUGHES | 45411H-2090 | 65 | WR28 90 degree Twist Section, 1.75 inches length | 1 |
| HUGHES | 45421H-2290 | 50 | WR28 90 degree H-Plane Bend | 6 |
| HUGHES | 45431H-1004.9 | 50 | WR28 Straight Section, 4.8 inches length | 5 |
| HUGHES | 45661H-2200 | 275 | WR28 tunable load, micrometer read | 1 |
| HUGHES | 45671H-2200 | 195 | WR28 Sliding Short, micrometer read | 1 |
| HUGHES | 45711H-2000 | 195 | WR28 Direct Reading Frequency Meter, 26.5-40 GHz | 4 |
| HUGHES | 45751H-2000 | 995 | WR28 Precision Direct Reading Phase Shifter, 0-360 degrees | 1 |
| HUGHES | 47121H | 165 | WR28 IMPATT Sweep Osc., 27.5-28.4 GHz, +7 dBm, 42-44V drive, 120-180mA sweep current | 1 |
| HUGHES | 47241H-2720B | 265 | WR28 Gunn Oscillator, 39.6GHz, +23 dBm Po, 200 MHz mechanical tuning bandwidth, 4.2V 1 A, supplied with a Trak Mw. 2571-1810 isolator | 1 |
| HUGHES | 47341H-2100 | 295 | WR28 Tunable Single Ended Harmonic Mixer, 26.5-40 GHz | 1 |
| HUGHES | 47431H-2003 | 395 | WR28 Tunable Harmonic Mixer, RF=26.5-40G, LO=8-15G, IF=10-1000M | 1 |
| HUGHES | 47741H-2310 | 495 | WR28 Phase-Locked Gunn Osc., 31.84-32.24 GHz, +19 dBm Po | 1 |
| HUGHES | WR28 dual IMPATT osc. | 350 | WR28 Dual IMPATT Osc., 34.3 GHz 100 mW & 37.4 GHz 50 mW, combined in a magic tee, isolator on output | 1 |
| HUGHRS | 45321H-1310 | 250 | Round (UG381/U) flange WR28 Directional Coupler, 10 dB coupling, split block construction | 1 |
| JUNCTION DEVICES | 173RI | 65 | WR28 Isolator, 20 dB, 37.2-39.4 GHz | 1 |
| KWM | 24DRI-3 | 65 | WR28 Isolator, 20 dB, 37-40 GHz, 1/2 inch insertion length | 1 |
| LAMBDA MICROWAVE | 286.402.218-P | 40 | WR28 Straight Section, 2.3 inches length, brass *new old stock* | 1 |
| LIECO | 19M2 | 195 | WR28 Medium Power Load, 50 Watts average power, UG600/U choke flange | 4 |
| LORCH MICROWAVE | 5WR28-29175/150 | 85 | WR28 Band Pass Filter, 29.10-29.25 GHz, 3 inches length | 4 |
| LORCH MICROWAVE | 6WR28-31G/R60C | 85 | WR28 Bandpass Filter, 30.9-31.1 GHz, 3-1/16" length | 10 |
| LORCH MICROWAVE | 7WG-39475/R350 | 85 | WR28 Band Pass Filter, 39.30-39.65 GHz, 2-1/8 inches length | 1 |
| LORCH MICROWAVE | 7WR=28225/250 | 85 | WR28 Band Pass Filter, 28.10-28.35 GHz, 3 inches length, cover/choke flange | 19 |
| M/A-COM | 093-449954-106 | 195 | WR28 Fixed Tuned Gunn Oscillator, 35.60 GHz, +13 dBm, +5.0V 440mA, with attached CMC junction isolator | 1 |
| M/A-COM | 2-28-400-29.36 | 50 | WR28 Isolator, 20 dB, 28-31 GHz, 0.75 inch insertion length | 1 |
| M/A-COM | 3-28-400/10 | 325 | WR28 Directional Coupler, 10 dB coupling | 1 |
| M/A-COM | 3-28-422/20/20 | 450 | WR28 Dual Directional Coupler, 20 dB coupling, 6 inches length | 1 |
| M/A-COM | 3-28-670 | 60 | WR28 90 degree Twist Section, 2 inches length | 4 |
| M/A-COM | 4-28-720-02 | 250 | WR28 Broadband Detector, negative polarity | 6 |
| M/A-COM | WR28 magic tee | 185 | WR28 Matched Hybrid Tee, 2.5 inches length, gold flashed | 1 |
| MAURY MICROWAVE | U210C6 | 325 | WR28 x 2.92mm(f) Adapter, 1.15 VSWR | 2 |
| MAURY MICROWAVE | U211C | 195 | WR28 x 2.92mm male Adapter, 1.25 VSWR | 1 |
| MAURY MICROWAVE | U233A | 295 | WR28 x 2.92mm female End Launch Adapter, 1.25 VSWR | 1 |
| MAURY MICROWAVE | U233B | 295 | WR28 x 2.92mm male End Launch Adapter, 1.25 VSWR | 1 |
| MAURY MICROWAVE | U233B1 | 325 | WR28 x 2.92mm male End Launch Adapter, 1.10 VSWR *new old stock* | 3 |
| MAURY MICROWAVE | U236A6 | 325 | WR28 x 2.4mm Male Adapter, 1.15 VSWR | 1 |
| MAURY MICROWAVE | U320D | 235 | WR28 Standard Mismatch, 1.20 VSWR | 2 |
| MAURY MICROWAVE | U351 | 250 | WR28 5-Probe Tuner, matches 1.10 VSWR to <1.01, vernier drives | 2 |
| MCCI WIRELESS | 22CIST-24 | 185 | WR28 Straight Section, 24 inches length, silver/brass | 4 |
| MCS | R-136 | 50 | WR28 90 degree H-Plane Bend | 1 |
| MDL | 25 dB ATTEN. | 85 | WR28 25 dB Fixed Attenuator, 3.5 inch length with integral 90 degree H-Plane Bend | 1 |
| MDL | 28AC206 | 235 | WR28 x 2.92mm(f) Adapter | 7 |
| MDL | 28AC39 | 125 | WR28 x SMA(m) Adapter | 6 |
| MDL | 28XT336R-1E | 165 | WR28 3-Port Crossguide Directional Coupler, 36 dB coupling, 1.5 inch insertion length | 3 |
| MDL | 28XT59-1K | 125 | WR28 3-Port Crossguide Coupler, 20 dB, 1 inch thru-line insertion length, cover/choke flanges on thru-line, choke flange on coupled port | 3 |
| MDL | 58028-449A | 50 | WR28 Isolator, 20 dB isolation, 28.0-29.5 GHz | 3 |
| MDT | 5618 | 65 | WR28 Isolator, 20 dB, 37-40 GHz, 1/2 inch insertion length | 1 |
| MDT | MFMKu2A | 350 | WR28 Doubler, 15.5-15.8 GHz +27 dBm in, 31-31.6 GHz +20 dBm out | 1 |
| MICRORECH | 239792-3 | 50 | WR28 Unjacketed Flexible Waveguide Section, 4 inches length, aluminum | 1 |
| MICROTECH | 2347831 | 145 | WR28 38.6 GHz High Pass Filter, 4 inches length | 1 |
| MICROTECH | 239792-5 | 50 | WR28 Unjacketed Flexible Waveguide Section, 5.5 inch length, aluminum | 1 |
| MICROTECH | 3400002-0001 | 50 | WR28 Unjacketed Flexible Waveguide Section, 5 in. length *new old stock* | 4 |
| MICROTECH | 3400003-0004 | 50 | WR28 Unjacketed Flexible Waveguide Section, 4 in.length,aluminum *new old stock* | 51 |
| MICROTECH | 3400003-0005 | 50 | WR28 Unjacketed Flexible Waveguide Section, 5.5 in. length, aluminum *new old stock* | 32 |
| MICROTECH | MTPS-28-PGC-N-24B | 135 | WR28 Flexible/Twistable Jacketed Waveguide, 24 inches length, cover/choke flanges | 1 |
| MICROTECH | WR28 flex 20" | 150 | WR28 Jacketed Flexible Waveguide, 20 inches length, brass, cover/ choke flanges | 1 |
| MICROWAVE ASSOCIATES | 1051 | 150 | WR28 Rotary Joint, S-shape, 34.0-35.5 GHz, choke flanges | 2 |
| MICROWAVE ASSOCIATES | 576S | 65 | WR28 Fixed Attenuator, 6 dB, 31-36 GHz, 1 watt max. | 1 |
| MICROWAVE ASSOCIATES | MA-1023A | 110 | WR28 Level Set Attenuator, 0-20 dB, uncalibrated drive, 1.75 inch insertion length, cover/choke flanges | 1 |
| MICROWAVE ASSOCIATES | MA-539C | 150 | WR28 Tunable Detector Mount, pos.polarity, micrometer read drive | 1 |
| MICROWAVE ASSOCIATES | MA-557 | 50 | WR28 90 degree H-Plane Bend, cover/choke flanges | 1 |
| MICROWAVE ASSOCIATES | MA-558A | 50 | WR28 90 degree Twist Section, 1.7 inches length | 1 |
| MICROWAVE DEEVELOPMENT CO. | 61028-001 | 195 | WR28 Power Sampler, 30 dB coupling, 2.92mm(f) coupled port, 1.5 inch length | 1 |
| MICROWAVE DEVELOPMENT CO. | 51028-285 | 150 | WR28 Short Body Directional Coupler, 6 dB coupling, directivity 20 dB, 5 inches length, cover/choke/choke flanges, aluminum | 1 |
| MICROWAVE DEVELOPMENT CO. | 65028-1462 | 50 | WR28 90 degree E-Plane Bend, 1.2 inch radius bend, brass, cover/choke flanges | 32 |
| MICROWAVE DEVELOPMENT CO. | 65028-1463 | 50 | WR28 90 degree H-Plane Bend, 1.2 inch radius bend, brass, cover/choke flanges | 15 |
| MICROWAVE RESEARCH | A160-6 | 145 | WR28 Directional Coupler, 6 dB coupling, 8.5 inches length | 1 |
| MICROWAVE SEMICONDUCTOR | MC7350W | 195 | WR28 Noise Source, 18 dB ENR, 34.7-35.3 GHz, 28VDC, BNC(f) drive | 1 |
| MILLIMETER PRODUCTS | 115A/599 | 325 | WR28 Full Band Isolator, 25 dB isolation, 1.5 dB insertion loss | 2 |
| MILLIMETER PRODUCTS | 511A/599 | 995 | WR28 Digital Readout Programmable Atten., 0-60 dB, GPIB | 2 |
| MILLIMETER PRODUCTS | 520A/599 | 250 | WR28 Variable Attenuator, 0-25 dB, lockable vernier read drive, 1 Watt maximum | 10 |
| MILLIMETER PRODUCTS | 559A-03/599 | 265 | WR28 Directional Coupler, 3 dB coupling | 2 |
| MILLIMETER PRODUCTS | 559A-10/599 | 265 | WR28 Directional Coupler, 10 dB coupling | 1 |
| MILLITECH | 45351H-1320 | 145 | WR28 (UG381/U round flange) Crossguide Coupler, 20 dB coupling. Split block construction | 1 |
| MILLITECH | 45611H-2000 | 115 | WR28 Low Power Termination, 1.05 VSWR, 1 Watt maximum | 1 |
| MILLITECH | CL3-28-S1000 | 295 | WR28 Directional Coupler, 10 dB coupling, split block | 1 |
| MILLITECH | DRA-28-S0000 | 995 | WR28 Precision Direct Reading Attenuator, 0-60 dB, 26.5-40 GHz | 4 |
| MILLITECH | DRF-28-S0000 | 195 | WR28 Direct Reading Frequency Meter, 26.5-40 GHz | 1 |
| MILLITECH | JFD-28-SI1SF | 145 | WR28 Full Band Junction Isolator, 20 dB isolation, insertion loss< 1.2 dB, 26.5-40 GHz, with separable third port load | 32 |
| MILLITECH | JFD-28-WI | 65 | WR28 Isolator, 20 dB, 33.5-36.0 GHz | 2 |
| MILLITECH | MWS-28-1RGAW | 950 | WR28 Motorized 3-Position 4-Port Switch & manual/GPIB controller | 1 |
| MILLITECH | MXP-28-A010LS | 395 | WR28 Balanced Mixer, RF/LO=26.5-40 GHz, LO=+13 dBm, IF=DC-13GHz | 2 |
| MILLITECH | MXP-28-RFSFL | 395 | WR28 Balanced Mixer, RF/LO=26.5-40 GHz, LO=+13 dBm, IF=DC-13 GHz | 1 |
| MILLITECH | MXP-28-RSXSL | 395 | WR28 Balanced Mixer, RF/LO=26.5-40 GHz, LO=+13 dBm, IF=DC-13 GHz | 1 |
| MILLITECH | SWS-28-S01000 | 40 | WR28 Straight Section, 1 inch length, gold flashed | 7 |
| MILLITECH | SWS-28-S03000 | 45 | WR28 Straight Section, 3 inches length, gold flashed | 10 |
| MILLITECH | WTR-28-S0000 | 115 | WR28 Low Power Termination, 1 Watt maximum, 1.05 VSWR | 24 |
| MITEQ | WGWR28-KM | 325 | WR28 x 2.92mm male End Launch Adapter | 1 |
| MPI | 1759 | 35 | WR28 Straight Section, 1 inch length | 1 |
| MRI | MIR-39 | 60 | WR28 Isolator, 20 dB, 38-40 GHz | 1 |
| MRI | MIR-39 (a) | 60 | WR28 Isolator, 18 dB, 36-38 GHz, 0.5 inch length | 1 |
| MRI | MIR-39 (b) | 60 | WR28 Isolator, 18 dB, 38.2-39.4 GHz, 0.5 inch length | 1 |
| MRI | MIR-39 (d) | 60 | WR28 Isolator, 18 dB, 36-40 GHz | 1 |
| MRI | MIR-39 © | 60 | WR28 Isolator, 18 dB, 38.0-39.7 GHz, 0.5 inch length | 1 |
| MW. DEVELOPMENT CO. | 62028-001 | 100 | WR28 Low Power Termination | 1 |
| MW. DEVELOPMENT CO. | 66028-1030 | 35 | WR28 Straight Section, 1-1/4 inch length, aluminum | 14 |
| M-WAVE DESIGN | 28CA1244 | 225 | WR28 x 2.92mm(f) Adapter, 1.30 VSWR | 6 |
| M-WAVE DESIGN | 28CA5KF-1 | 225 | WR28 x 2.92mm(f) Adapter | 1 |
| M-WAVE DESIGN | 28EB1202 | 50 | WR28 90 degree E-Plane Mitre Bend, 2.5 inch bend radius | 1 |
| M-WAVE DESIGN | 28FA1224 | 90 | WR28 Fixed Attenuator, 50 dB, 38-40 GHz, body length 6.1 inches, aluminum | 2 |
| M-WAVE DESIGN | 28FA1B(5) | 100 | WR28 Fixed Attenuator, 5 dB, body length 1.25 inches, brass | 2 |
| M-WAVE DESIGN | 28SC-10 | 185 | WR28 Directional Coupler, 10 dB coupling | 2 |
| M-WAVE DESIGN | WR28 pickup horn | 85 | WR28 Pickup Horn, 10 dBi gain, aluminum construction, 0.81 inch overall length | 12 |
| NARDA | V1067-03 | 350 | WR28 Directional Coupler, 3 dB coupling | 2 |
| NARDA | V1067-10 | 350 | WR28 Directional Coupler, 10 dB coupling | 3 |
| NARDA | V297C | 125 | WR28 Low Power Termination, 1.02 VSWR, 0.5 Watt maximum | 1 |
| NARDA | V357-3 | 60 | WR28 90 degree Twist Section, 3 inches length, brass | 1 |
| NARDA | V377 | 145 | WR28 Sliding Load, uncalibrated drive | 1 |
| NARDA | V4607 | 325 | WR28 x 2.92mm(f)Adapter *new old stock* | 1 |
| NARDA | V717-03 | 100 | WR28 3 dB Fixed Attenuator | 1 |
| NARDA DBS MICROWAVE | DB99-1164R2 | 195 | WR28 Downconverter,RF=38-40 GHz, LO=12.7-14G +7 dBm, IF=10-2500M,6V | 1 |
| OMEGA LABS | 3311-J | 295 | WR28 Directional Coupler, 40 dB coupling | 1 |
| OVERWAVE LABS | WR28-Kf | 200 | WR28 x 2.92mm(f) Adapter | 2 |
| PAMTECH | RYG2031 | 65 | WR28 Junction Isolator, 20 dB, 37-40 GHz | 1 |
| PENN ENGINEERING | 3421 | 50 | WR28 180 degree H-Plane Bend, 1.5 inch center-to-center waveguuide ports | 1 |
| PENN ENGINEERING | 5030-111B-10 | 250 | WR28 Directional Coupler, 10 dB coupling | 1 |
| PENN ENGINEERING | WR28 H 90 | 45 | WR28 90 degree H-Plane Bend, cover/choke flanges | 2 |
| PRD | 312-AF1 | 300 | WR28 E-H Plane Tuner, micrometer drives | 3 |
| PRD | A414-10F1 | 150 | WR28 Directional Coupler, 10 dB coupling | 1 |
| PRD | WR42 x WR28 | 145 | WR28 x WR42 Taper Section, 5.87 inches length | 1 |
| QUASAR MICROWAVE | QDC22-810960 | 275 | WR28 Directional Coupler, 10 dB coupling | 1 |
| QUASAR MICROWAVE | QFA22RQZ | 100 | WR28 40 dB Fixed Attenuator (35 dB at 26.5G; 40 dB at 34G; 45 dB at 40G), 1 watt maximum | 1 |
| QUASAR MICROWAVE | QFA22SQB-442442B20 | 60 | WR28 Straight Section, brass, 4.0 inches length | 4 |
| QUASAR MICROWAVE | QFL22-EQB-443B | 100 | WR28 Low Power Termination, 1.10 VSWR, 0.5 Watt max. | 1 |
| QUASAR MICROWAVE | QPB22-CQZ442442C90E | 50 | WR28 90 degree E-Plane Bend, brass | 2 |
| QUASAR MICROWAVE | R-112-15CM | 65 | WR28 Straight Section, brass, 15cm (5.88 inches) length | 5 |
| QUASAR MICROWAVE | WR28 flex 12" | 95 | WR28 Flexible Waveguide, 12 inches length, brass, choke/ choke flanges' | 2 |
| QUEST MICROWAVE | 3740 | 50 | WR28 Isolator, 18 dB, 37-40 GHz, 1.08 inch insertion length | 1 |
| QUINSTAR | QAF-A06000 | 100 | WR28 Fixed Attenuator, 6 dB, 1 Watt maximum | 7 |
| QUINSTAR | QJG-A03300 | 265 | WR28 Directional Coupler, 3 dB coupling, spli block construction | 2 |
| QUINSTAR | QJR-2810-BA | 265 | WR28 Directional Coupler, 10 dB coupling, split block construction | 5 |
| QUINSTAR | QJR-2820-BA | 265 | WR28 Directional Coupler, 20 dB coupling, split block construction | 4 |
| QUINSTAR | QWZ-AM1500 | 495 | WR28 Solenoid or Manual Driven DPDT Transfer Switch, 15 VDC with indicator lines | 1 |
| RADIALL | R2791 | 75 | WR28 Circulator, 18 dB isolation, 29-32 GHz | 1 |
| RADITEK | 902410 | 65 | WR28 Isolator, 20 dB, 36-40 GHz, 1/2 inch insertion length | 1 |
| RADITEK | RADI-37-40 | 65 | WR28 Isolator, 25 dB, 37-40 GHz, 1/2 inch insertion length | 1 |
| RANTEC | 62640 | 145 | WR28 Conical Horn, 1.65 inch length x 0.85 inch diameter, with 10.5 inch diameter radome attached, feed optimized for 28 GHz | 1 |
| SCIENTIFIC ATLANTA | 14-7-1 | 295 | WR28 Single-Ended Harmonic Mixer, 26.5-40 GHz, for 1780 receiver | 1 |
| SPACE KOM | DFKa-U | 265 | WR28 Downcoverter,13-20 GHz +20 dBm LO, IF=0.1-50 MHz,15V IF amp | 1 |
| SPACE MACHINE & ENG. | 60788-27 | 235 | WR28 x 2.92mm(f) Adapter | 1 |
| SPACEK LABS | 28 GHz mixer | 295 | WR28 Mixer, RF=27-30 GHz, internally doubled LO=13.5-15 GHz +17 dBm, amplified IF=1-500 MHz, 10 dB conversion gain, 12V 20mA | 1 |
| SPACEK LABS | 37.6-40G BPFL | 100 | WR28 Band Pass Filter, 37.6-40 GHz, 5-section, 1.5 inch length | 1 |
| SPACEK LABS | DKA-1 | 195 | WR28 Negative olarityy Detector, SMA(f) output | 1 |
| SPACEK LABS | GKA-360 | 195 | WR28 Fixed Tuned Gunn Oscillator, 36.43 GHz, +15 dBm Po,+4.5V 820mA, with attached MRI junction isolator | 1 |
| SPECTRUM ELEKTRONIK | WA-R028-S002 | 295 | WR28 x 2.4mm(f) Adapter,1.10 VSWR | 3 |
| SPERRY | 22V2 | 300 | WR28 E-H Plane Tuner, micrometer drives | 1 |
| SPERRY | 23V1 | 195 | WR28 Adjustable Short, micrometer read | ASK* |
| SPERRY MICROLINE | 42V1 | 110 | WR28 Low Power Termination, 1.05 VSWR, 1 Watt maximum | 1 |
| SYSTRON DONNER | DBD-056 | 35 | WR28 Choke to Choke Flange Adapter, 0.35 inch length | 1 |
| SYSTRON DONNER | DBD-450 | 110 | WR28 Low Power Termination, 1/2 Watt maximum, 1.01 VSWR | 3 |
| SYSTRON DONNER | DBD-620 | 90 | WR28 H-Plane (Shunt) Tee | 1 |
| SYSTRON DONNER | DBD-620-SP | 90 | WR28 H-Plane (Shunt) Tee, choke fl's main line, cover fl. Tee | 2 |
| SYSTRON DONNER | DBD-675-10 | 250 | WR28 Directional Coupler, 10 dB coupling | 1 |
| SYSTRON DONNER | DBD-675-3 | 250 | WR28 Directional Coupler, 3 dB coupling | 1 |
| SYSTRON DONNER | DBD-979-1 | 350 | WR28 E-H Plane Tuner, micrometer read drives | 1 |
| SYSTRON DONNER | DBDE-018 | 200 | WR28 x WR42 Taper Section, 3 inches length | 1 |
| TECHNICRAFT | TS41-4-B-2.50-N | 50 | WR28 Jacketed Flexible Section, 2.5 inches length, cover/choke, silver-brass | 3 |
| TEKTRONIX | WM490A | 250 | WR28 Harmonic Mixer, 26.5-40 GHz | 3 |
| TRAK MICROWAVE | 2571-1801 | 165 | WR28 Isolator, 20 dB, 26.5-40 GHz, <1.5 dB ins. Loss | 2 |
| TRAK MICROWAVE | 2571-1810 | 165 | WR28 Isolator, 20 dB, 26.5-40 GHz, <1.5 dB ins. Loss | 15 |
| TRG | 169A/599 | 65 | WR28 Isolator, 20 dB, 34.3-36.6 GHz, 3/4 inch insertion length | 1 |
| TRG | 528A/599 | 245 | WR28 Variable Phase Shifter, 0-180 degrees, lockable dial drive, UG381/U flanges with UG599/U adapters- 4.75 inches length | 1 |
| TRG | 565A/599 | 165 | WR28 3-Port Crossguide Coupler, 20 dB coupling, split block body, 1.5 inch insertion length | 2 |
| TRG | 585A/599 | 235 | WR28 Sliding Matched Load, micrometer drive | 2 |
| TRG | 640A/599 | 90 | WR28 Series (E-Plane) Tee, 2.38 inches length | 1 |
| TRG | 650A/599 | 90 | WR28 H-Plane (Shunt) Tee | 7 |
| TRG | 690A-12.00/599 | 95 | WR28 Straight Section, 12 inches length, UG599/U cover flanges, silver/brass | 2 |
| TRG | 690A-12.00/600 | 95 | WR28 Straight Section, 12 inches length, UG600/U choke flanges, silver/brass | 1 |
| TRG | 690A-3.00/599 | 40 | WR28 Straight Section, 3 inches length, UG599/U cover flanges, silver/brass | 4 |
| TRG | 690A-5.5/599 | 50 | WR28 Straight Section, 5.5 inches length, UG599/U cover flanges, silver/brass | 1 |
| TRG | A510 | 695 | WR28 Precision Direct Reading Attenuator, 0-50 dB | 5 |
| TRG | A521-03 | 100 | WR28 3 dB Fixed Attenuator, 1 Watt maximum | 2 |
| TRG | A551 | 195 | WR28 Direct Reading Frequency Meter, 26.5-40 GHz | 2 |
| TRG | A559-10 | 350 | WR28 Directional Coupler, 10 dB coupling | 5 |
| TRG | A590 | 195 | WR28 Adjustable Short, micrometer drive | 4 |
| TRG | A620 | 350 | WR28 E-H Plane Tuner, micrometer read drives | 1 |
| TRG/ NEMS | A521-01 | 100 | WR28 1 dB Fixed Attenuator, 1 Watt maximum | 6 |
| UMT | 31 GHz BPFL | 85 | WR28 Band Pass Filter, 31.000-31.075 GHz | 7 |
| UMT | 31.25 GHz BPFL | 85 | WR28 Band Pass Filter, 31.225-31.3 GHz | 4 |
| UMT | 38.8 GHz BPFL | 85 | WR28 Band Pass Filter, 38.6-38.95 GHz | 4 |
| UMT | 39.5 GHz BPFL | 85 | WR28 Band Pass Filter, 39.3-39.65 GHz | 4 |
| UNIQUE BROADBAND | 132-28-C-1 | 95 | WR28 Low Power Termination, 1.05 VSWR, 0.5 Watt maximum | 1 |
| UNIQUE BROADBAND | 152-28-20 | 75 | WR28 Fixed Attenuator, 22 +/-3 dB, 2 inches length, brass | 2 |
| US ARMY | C5U-83175 | 85 | WR112 (proprietary flange) x WR28 (proprietary flange) Taper Section, 1.25x0.57 inch four hole flangepattern WR112 / 0.73x0.55 four hole flange pattern WR28, 1.95 inch length, aluminum | 1 |
| WATKINS JOHNSON | 2A6700N | 225 | WR28 Mixer, 11-20 GHz +15 dBm LO, 100kHz-6 GHz IF, 15V bias | 3 |
| WAVELINE | 100310 | 165 | WR28 (choke flange) Detector, negative polarity, BNC(f) | 1 |
| WAVELINE | 100392 | 325 | WR28 Motorized DPDT Transfer Switch, 28 VDC | 1 |
| WAVELINE | 1005-A | 250 | WR28 Direct Reading Variable Attenuator, 0-20 dB | 1 |
| WAVELINE | 1012 | 250 | WR28 Variable Attenuator, 0-40 dB, guage read, 9.3 inches length | 1 |
| WAVELINE | 1032 | 50 | WR90 90 degree E-Plane Bend, cover/choke flanges, silver plated brass | 1 |
| WAVELINE | 1032-2 | 50 | WR28 90 degree E-Plane Bend | 2 |
| WAVELINE | 1033 | 50 | WR28 90 degree H-Plane Bend, cover/choke flanges, silver plated brass | 1 |
| WAVELINE | 1033-2 | 50 | WR28 90 degree H-Plane Bend, cover flanges, silver plated brass | 1 |
| WAVELINE | 1038 | 50 | WR28 45 degree E-Plane Bend, cover/choke flanges | 1 |
| WAVELINE | 1038-1 | 50 | WR28 45 degree E-Plane Bend, choke flanges | 1 |
| WAVELINE | 1039 | 50 | WR28 45 degree H-Plane Bend, cover/choke flanges | 1 |
| WAVELINE | 1039-2 | 50 | WR28 45 degree H-Plane Bend, cover flanges | 2 |
| WAVELINE | 1041-2-1.25 | 35 | WR28 Straight Section, 1.25 inch length, cover flanges, silver/brass | 4 |
| WAVELINE | 1041-2-2 | 45 | WR28 Straight Section, 2 inches length, cover flanges, silver/brass | 2 |
| WAVELINE | 1041-2-3 | 50 | WR28 Straight Section, 3 inches length, cover flanges, silver/brass | 2 |
| WAVELINE | 1041-2-4 | 60 | WR28 Straight Section, 4 inches length, cover flanges, silver/brass | 1 |
| WAVELINE | 1041-3 | 50 | WR28 Straight Section, 3 inches length, cover/choke flanges, silver/brass | 2 |
| WAVELINE | 1042-06 | 65 | WR28 Straight Section, 6 inches length, cover/choke flanges, silver plated brass | 4 |
| WAVELINE | 1042-1-06 | 65 | WR28 Straight Section, 6 inches length, choke flanges, silver plated brass | 1 |
| WAVELINE | 1042-2-06 | 65 | WR28 Straight Section, 6 inches length, cover flanges, silver plated brass | 3 |
| WAVELINE | 1043-2-12 | 95 | WR28 Straight Section, 12 inhes length, brass | 3 |
| WAVELINE | 1054 | 115 | WR28 Low Power Termination, 1 Watt maximum, 1.02 VSWR | 1 |
| WAVELINE | 1061 | 195 | WR28 Adjustable Short, micrometer drive | 1 |
| WAVELINE | 1067 | 75 | WR28 Pressurization Section, two inlets, one with 0-15 PSI guage, 4 in. length | 1 |
| WAVELINE | 1067 -no guage | 35 | WR28 Pressurization Section, two 3/8-NPT inlets, no guage supplied, 4 in. length | 1 |
| WAVELINE | 1069-20 | 125 | WR28 4-Port Crossguide Coupler, 20 dB coupling | 1 |
| WAVELINE | 1074-03 | 250 | WR28 Directional Coupler, 3 dB coupling | 2 |
| WAVELINE | 1078-E | 325 | WR28 4-Port Manual Transfer Switch, E-Plane switching | 1 |
| WAVELINE | 1078-H | 325 | WR28 4-Port Manual Transfer Switch, H-Plane switching | 1 |
| WAVELINE | 1080 | 75 | WR28 Waveguide Shutter (SPST manual switch), 3 inches length, brass | 1 |
| WAVELINE | 1083 | 250 | WR28 Slide Screw Tuner Tuner, micrometer probe drive, 4.95 inches length | 2 |
| WAVELINE | 1085 | 90 | WR28 H-Plane (Shunt) Tee | 2 |
| WAVELINE | 1090 | 60 | WR28 90 degree Twist Section, 3.5 inches length, cover/choke flanges | 3 |
| WAVELINE | 17-02137 | 50 | WR28 Asymertric 90 deg. H Bend, 1-3/4" x 1-1/8" legs, choke fl's | 2 |
| WAVELINE | K1058 | 135 | WR28 Matched Hybrid Tee, UG381 flanges with adapters to UG599, 5.58 inches insertion length | 1 |
| WAVETRONICS | 6618S-01 | 225 | WR28 Slide Screw Tuner, vernier read | 1 |
| WILTRON | 35WR28K | 295 | WR28 x 2.92mm(m) Adapter | 5 |
| WILTRON | 35WR28KF | 295 | WR28 x 2.92mm(f) Adapter | 3 |
| WISEWAVE | PTC-28KF-V1 | 225 | WR28 x 2.92mm(f) Adapter | 4 |
| | | | WR34 WAVEGUIDE: 22-33 GHz | |
| ALVARION | MPA-24BH90-WR34-01 | 115 | WR34 Sectoral Horn Antenna, 24.25-26.5 GHz, with radome, 5.30 x 2.75 inch base, 3.5 inch height | 1 |
| APOLLO MICROWAVES | C2171-40F-40F | 375 | WR34 Dual Arm Uni-directional Crossguide Coupler, 40 dB coupling both arms, brass, 4 inches length, cover flanges on thru-line/ choke flanges on coupled ports | 1 |
| ATM | 34-331B-50-6-6?VS | 300 | WR34 Short Body Directional Coupler, 50 dB, 27.5-31 GHz, 25 dB directivity, 2.75 inches length, 2.92mm(f) coupled port | 2 |
| BSC | 115276-01 | 100 | WR34 Band Pass Filter, 24.25-25.25 GHz, 2.25 inches length | 1 |
| CMT | RA34-2.4-F-2A-A | 295 | WR34 x 2.4mm(f) Adapter | 3 |
| CMT | RA34-K-F-1A-A | 275 | WR34 x 2.92mm(f) Adapter | 7 |
| CMT | RBC34-10-1A-1A-1A-A | 475 | WR34 Directional Coupler, 10 dB coupling | 4 |
| CMT | RCC-34-3.5MM-F-20-3B | 295 | WR34 3-Port Crossguide Coupler, 20 dB coupling, 3.5mm(f) coupled port | 1 |
| CMT | REB34-1A1A-1.00-2.75-A | 50 | WR34 Assymetrical E-Plane Bend, 1.00 & 2.75 inch leg lengths, aluminum | 6 |
| CMT | REB34-1A1A-1.0-4.5-A | 50 | WR34 Assymetrical 90 degree E-Plane Bend, 1.0 inch x 4.5 inch legs, aluminum | 1 |
| CMT | REB34-1A1A-2.38-4.50-A | 50 | WR34 Assymetrical E-Plane Bend, 2.38 & 4.50 inch leg lengths, aluminum | 8 |
| CMT | RPWQ34-1A-050809 | 90 | WR34 Pressure Window, 30 PSI maximum, 1.2 VSWR, 0.38 inch thick | 4 |
| CMT | RT34-1A-1A-90-2.06-A | 65 | WR34 90 degree Twist Section, aluminum, 2.06 inches length | 12 |
| DORADO INTL. | BE-34F | 65 | WR34 90 degree E-Plane Bend, 1.5 inch bend radius, gold flashed brass | 10 |
| EMERSON & CUMMINGS | 757C-E | 65 | WR34 90 degree E-Plane Bend, choke flanges | 1 |
| FARRAN TECHNOLOGY | FLT-3137 | 295 | WR34 Mech.Tunable Gunn Osc., 23.6-27.3 GHz, 200mW, 5.2V, w/isol. | 1 |
| FLANN MICROWAVE | 21081-10 | 135 | WR34 10 dB Fixed Attenuator, UBR260 flange | 1 |
| FLANN MICROWAVE | 21110 | 1695 | WR34 Precision Direct Reading Attenuator, 0-60 dB, UBR260 flange | 2 |
| FLANN MICROWAVE | 21333-2E | 195 | WR34 Motorized DPDT Transfer Switch; Flann motor controller required but not included | 4 |
| FLANN MICROWAVE | 21460 | 65 | WR34 90 degree E-Plane Bend, UBR260 flange | 1 |
| GENERIC | WR34 3" flex | 50 | WR34 Jacketed Flexible Waveguide Section, 3 in. length, choke fl | 4 |
| GENERIC | WR34 antenna | 35 | WR34 Straight Waveguide Radiator, 6 dBi gain, 0.88 inch length, nickel/stainless finish | 2 |
| GHZ MICROWAVE | WR34-WR22 | 295 | WR34 x WR22 Taper Section, 1.85 inch length, gold flashed | 1 |
| HASCO | WR34 12" flex | 115 | WR34 Unjacketed Flexible Waveguide Section, 12 inches length, cover/choke flanges, brass | 2 |
| HASCO | WR34 9" flex | 95 | WR34 Unjacketed Flexible Waveguide Section, 9 inches length, cover/choke flanges, brass | 1 |
| HASCO | WR34 E 90 | 65 | WR34 90 degree E-Plane Bend, cover/choke flanges | 1 |
| LIEDER DEVELOPMENT | L34TWT-2.0-CV | 65 | WR34 90 degree Twist, 2 inches length, brass | 1 |
| LIEDER DEVELOPMENT | LD34 | 250 | WR34 (choke flange) x 2.92mm(f) Adapter | 1 |
| LOGUS MICROWAVE | MD34BOL2X7 | 350 | WR34 Manual or Motor Operated 4-Port DPDT Switch, 28 VDC, choke flanges | 1 |
| M/A-COM | 505186 | 350 | WR34 (32.1-33.1 GHz) and WR90 (9.0-9.6 GHz) Dual Waveguide Straight Rotary Joint, 9.18 inch length, cover/choke flanges, tested to 20 PSI, VSWR<1.25 *new old stock, with test data* | 1 |
| PENN ENGINEERING | 3732-11BM1 | 275 | WR34 Variable Attenuator, 0-30 dB, counter dial drive, w/25.5-27 GHz cal.chart | 1 |
| QUEST MICROWAVE | 2429 | 110 | WR34 Circulator, 18 dB isolation, 24-29 GHz | 10 |
| SPECTRUM ELEKTRONIK | WA-R034-HF01 | 295 | WR34 x 2.4mm(f) Adapter | 1 |
| | | | WR42 WAVEGUIDE: 18.0-26.5 GHz | |
| AEROWAVE | 42-1890 | 50 | WR42 90 degree E-Plane Bend | 1 |
| AEROWAVE | 42-2030 | 195 | WR42 High Power Load, 50 Watts average power | 1 |
| AEROWAVE | 42-2106 | 95 | WR42 Fixed Attenuator, 6 dB, 1 Watt, 19-22 GHz | 1 |
| AEROWAVE | 42-2808 | 85 | WR42 Series (E-Plane) Tee | 1 |
| AEROWAVE | 42-4000/20 | 295 | WR42 Directional Coupler, 20 dB coupling | 1 |
| AIRTRON | UG-1113/U | 95 | WR42 Matched Hybrid Tee, 0.95 inch length, aluminum | 1 |
| ALCATEL | 1876-SFO | 65 | WR42 Iso-Adapter, 20 dB isol., 17.7-19.7 GHz, WR42-in/SMAf-out | 2 |
| ALCATEL | 23 GHz BPFL | 60 | WR42 Band Pass Filter, 22.98-23.04 GHz, 3 inches length, brass | 1 |
| ANDREW | 164264-36 | 175 | WR42 Jacketed Flexible Waveguide Section, 36" length, cover/choke flanges | 1 |
| ANDREW | D042MKSG | 50 | WR42 90 degree Twist Section, cover/choke flanges, brass, 3 inches length | 9 |
| ANDREW | F042PA0240BS | 150 | WR42 Jacketed Flexible Twistable Waveguide, 24 inches length, cover/choke flanges | 2 |
| ANDREW | H042MK05-8M058-SG | 50 | WR42 90 degree H-Plane Bend, cover/choke flanges, brass | 8 |
| ANRITSU | 35UA42K | 250 | WR42 x 2.92mmm male Adapter | 1 |
| ANRITSU | MP-712A-1 | 195 | WR42 Power Sensor, -20 to +20 dBm, for ML83A | 1 |
| APOLLO MICROWAVES | 9093829-5 | 75 | WR42 Band Pass Filter, 17.92-18.44 GHz, 6 sections, 3.2 inches length | 1 |
| ATM | 42-25KA-6 | 195 | WR42 x 2.92mm(f) Adapter | 1 |
| BSC FILTERS | 1028871-0001A | 90 | WR42 Diplexer, 24.25-24.45 GHz & 25.05-25.25 GHz, 4.25 inches length, aluminum | 1 |
| CERNEX | CWK-42-M | 240 | WR42 x 2.92mm(m) Adapter | 3 |
| CMT | 20565-002 | 95 | WR42 Precision Fixed Attenuator, 6 dB, 1 watt maximum, 11 inches length | 7 |
| CMT | AR42-3 | 75 | WR42 3 dB Fixed Attenuator, 1 Watt maximum | 1 |
| CMT | LPTS-42 | 195 | WR42 Sliding Termination, uncalibrated drive with locking screw | 1 |
| CMT | LPTSL42-7A-A | 110 | WR42 (choke flange) Low Power Termination, 2 Watts, 1.10 VSWR, 1.5 inch body length | 1 |
| CMT | RA42-K-F-1A-A | 235 | WR42 x 2.92mm(f) Adapter | 1 |
| CMT | RBC42-10-1A1A | 265 | WR42 Directional Coupler, 10 dB coupling | 14 |
| CMT | RCC42-3-3.5MM-F-30-5B5B | 285 | WR42 3-port (terminated) Crossguide Coupler, 30 dB coupling, 3.5mm(f) coupled port, choke flanges input & output, brass body | 5 |
| CMT | REB42-1A1A-2.38-4.5-A | 50 | WR42 Asymetrical 90 degree E-Plane Bend, 2.38 and 4.5 inch leg lengths, aluminum | 2 |
| CMT | RFG42-8-1B1B-HP | 50 | WR42 Unjacketed Flexible Section, 8 inch length, brass | 1 |
| CMT | RHB42-1A1A0-2.0 | 50 | WR42 90 degree H-Plane Bend, 2 inch bend radius, aluminum | 1 |
| CMT | RT42 | 50 | WR42 90 degree Twist Section, aluminum, 2.12 inches length | 1 |
| CMT | RT42-1A1A | 50 | WR42 90 degree Twist Section, aluminum, 2.1 inches length | 2 |
| CTR | 201333 | 75 | WR42 Downconverter, RF=21-22 GHz, LO=6.5-7.0G, IF=1-2 GHz, +5V | 1 |
| DEMIORNAY BONARDI | DBDE-018 | 185 | WR42 to WR28 Taper Section, 3.38 inches length | 1 |
| DEMORNAY BONARDI | DBE-210-04 | 50 | WR42 Straight Section, 4 inches length | 1 |
| DEMORNAY BONARDI | DBE-210-5.75 | 50 | WR42 Straight Section, 5.75 inches length | 1 |
| DEMORNAY BONARDI | DBE-274 | 50 | WR42 90 degree Twist Section, 4 inches length | 2 |
| DEMORNAY BONARDI | DBE-313 | 150 | WR42 Tunable Detector, negative polarity, uncalibrated drive | 1 |
| DEMORNAY BONARDI | DBE-430 | 195 | WR42 Variable Attenuator, 0-20 dB, arbitrary 0-100 dial marking, 0.5 Watt average power, 4.37 inches length | 1 |
| DEMORNAY BONARDI | DBE-460 | 275 | WR42 (choke flange) High Power Load, 150 Watts average power/ 100 kW peak | 1 |
| DEMORNAY BONARDI | DBE-630-20 | 175 | WR42 4-Port Crossguide Coupler, 20 dB coupling | 1 |
| DEMORNAY BONARDI | DBE-641 | 95 | WR42 (round UG425/U flanges) Dual Directional Crossguide Coupler, 20 dB coupling, 4 ports | 2 |
| DEMORNAY BONARDI | DBE-655 | 165 | WR42 Matched Hybrid Tee, 2.74 inches length | 1 |
| DEMORNAY BONARDI | DBE-915 | 235 | WR42 Variable Phase Shifter, 0-180 degrees, uncalibrated drive | 1 |
| DEMORNAY BONARDI | DBE-915-1 | 235 | WR42 Variable Phase Shifter, 0-180 degrees, 0-100 arbitrary dial scale | 1 |
| DICO | 1002 | 90 | WR42 Fixed Attenuator, 6 dB, 2-1/2 inches length | 1 |
| DORADO INTL. | 4IWY22-1 | 150 | WR42 Full Band Junction Isolator, 18.0-26.5 GHz, 18 dB isolation, 0.35 dB insertion loss, 0.88 inch length | 25 |
| DORADO INTL. | AN-0053-0 | 100 | WR42 Variable Attenuator, 0-30 dB, vernier drive | 1 |
| DORADO INTL. | EPT-42 | 85 | WR42 E-Plane (Series) Tee | 1 |
| DORADO INTL. | WR42 3.98" | 40 | WR42 Straight Section, 3.98 inches length, gold flashed brass | 1 |
| EMS WIRELESS | 26H-90-17-1 | 65 | WR42 26 GHz horizontal polarization Secoral Horn Antenna, 8 in length x 6.5 in. height x 1.2 in., aluminum | 1 |
| EMS WIRELESS | 26V-90-17-1 | 65 | WR42 26 GHz vertical polarization Sectoral Horn Antenna, 8 in. length x 6.5 in. width x 1.2 in., aluminum | 4 |
| FERROCOM | 2100-3T | 75 | WR42 Isolator, 20 dB, 19-24 GHz | 54 |
| FLANN MICROWAVE | 2011 | 895 | WR42 Precision Direct Reading Attenuator, 0-60 dB | 1 |
| FLANN MICROWAVE | 20110 | 895 | WR42 Precision Direct Reading Attenuator, 0-60 dB | 4 |
| FLANN MICROWAVE | 20131-10 | 450 | WR42 Directional Coupler, 10 dB coupling, directivity 40 dB | 8 |
| FLANN MICROWAVE | 20300-AA | 350 | WR42 Dual Directional Coupler, 10 dB coupling both directions, directivity 33 dB | 8 |
| FLANN MICROWAVE | 20333-3E/DS5741 | 750 | WR42 Motorized 4-position 4-port Switch, w/manual & GPIB control | 1 |
| FLANN MICROWAVE | 20441-700mm | 175 | WR42 Straight Section, 28 inches length *new old stock* | 1 |
| FLANN MICROWAVE | 20441-700mm | 135 | WR42 Straight Section, 27.55 inches length *new old stock* | 3 |
| FLANN MICROWAVE | 20450-90LH | 50 | WR42 90 degree Twist Section, 3.35 inch length | 1 |
| FLANN MICROWAVE | 20460-90 | 50 | WR42 90 degree E-Plane Bend | 12 |
| FLANN MICROWAVE | 20470-90 | 50 | WR42 90 degree H-Plane Bend | 10 |
| FXR/MICROLAB | K102AF | 150 | WR42 Slotted Line System, with carriage and positive polarity detector | 1 |
| FXR/MICROLAB | K157AF | 225 | WR42 Isolator, 20 dB isolation, 18.0-26.5 GHz | 1 |
| FXR/MICROLAB | K312CF | 300 | WR42 E-H Plane Tuner, micrometer drives | 2 |
| FXR/MICROLAB | K501AF | 110 | WR42 Low Power Termination, 0.5 Watt, 1.05 VSWR | 3 |
| FXR/MICROLAB | K610AF | 295 | WR42 Directional Coupler, 3 dB coupling | 1 |
| FXR/MICROLAB | K610BF | 295 | WR42 Directional Coupler, 6 dB coupling | 1 |
| FXR/MICROLAB | K612DF | 175 | WR42 4-Port Crossguide Coupler, 20 dB coupling | 5 |
| FXR/MICROLAB | K623BF | 50 | WR42 90 degree E-Plane Bend | 4 |
| FXR/MICROLAB | K6251AF | 50 | WR42 90 degree Twist Section, 2.6 inch length | 2 |
| FXR/MICROLAB | K630CF | 200 | WR42 Adjustable Short, micrometer drive | 3 |
| GAMMA-F | F-4263-A | 90 | WR42 Band Pass Filter, 18.88-18.99 GHz, cover/choke flanges, brass, 3 inches length | 2 |
| GAMMA-F | F-4263-B | 90 | WR42 Band Pass Filter, 18.555-18.645 GHz, cover/choke flanges, brass, 3 inches length | 1 |
| GENERAL DYNAMICS SATCOM | 110292-1 | 65 | WR42 Band Pass Filter, 23.08-23.53 GHz, 2.18 inches length, gold flashed brass | 1 |
| GENERIC | WR42 12" straight | 40 | WR42 Straight Section, 12 inches length, aluminum | 1 |
| GENERIC | WR42 18.8" straight | 95 | WR42 Straight Section, 18.8 inches length, brass | 1 |
| GENERIC | WR42 4.5" straight | 45 | WR42 Straight Section, 4.5 inches length, aluminum, choke flanges | 4 |
| GENERIC | WR42 4.5" straight | 40 | WR42 Straight Section, 4.5 inches length, aluminum | 5 |
| GENERIC | WR42 4.7" | 40 | WR42 Straight Section, 4.7 inches length, brass, cover/choke flanges | 1 |
| GENERIC | WR42 6" straight | 45 | WR42 Straight Section, 6 inches length, choke flanges, aluminum | 1 |
| GENERIC | WR42 8" | 45 | WR42 Straight Section, 8 inches length, choke flanges, brass | 1 |
| GENERIC | WR42 90 twist | 50 | WR42 90 degree Twist Section, 3 inch length, cover/choke flanges, brass | 2 |
| GENERIC | WR42 assym H 90 | 40 | WR42 Asymetrical 90 degree H-Plane Bend, 1.18 x 2.25 inch leg lengths, brass | 2 |
| GENERIC | WR42 assym H 90 | 40 | WR42 Asymetrical 90 degree H-Plane Bend, 1.75 x 3.62 inch leg lengths, brass | 2 |
| GENERIC | WR42 bulkhead | 35 | WR42 Bulkhead, 1.5 in. square x 0.62 in. thick, 4 hole mount | 6 |
| GENERIC | WR42 bulkhead | 35 | WR42 Bulkhead Plate, 2.0 x 1.0 inch plate 0.5 inch thick, two hole mount, silver/brass | 2 |
| GENERIC | WR42 choke/choke adapter | 35 | WR42 choke flange (UG596) x choke flange (UG596) Adapter, 0.43 inch length | 1 |
| GENERIC | WR42 circ wg horn | 95 | WR42 Circular Waveguide Horn, 0.39 inch diameter, 1.79 inch length, with UG595 flange rectangular to circular waveguide transition, brass | 1 |
| GENERIC | WR42 E 90 mitre | 40 | WR42 90 degree E-Plane Mitre Bend, 2.5 inch legs, aluminum | 16 |
| GENERIC | WR42 termination | 45 | WR42 Short Body Termination, 1 inch length, conical load, 1 Watt maximu, 1.1 VSWR | 3 |
| GENERIC | WR42 twist | 60 | WR42 90 degree Twist Section, 11.6 inches length, cover/choke | 1 |
| GENERIC | WR42 twist | 60 | WR42 90 degree Twist Section, 11-1/2 inches length, cover/choke | 1 |
| GENERIC | WR62 x WR42 taper | 90 | WR42 x WR62 Taper Section, silver/brass, 4.5 inches length | 2 |
| HNL, INC. | 042-590-2 | 50 | WR42 90 degree E-Plane Bend, brass, choke flanges | 2 |
| HONEYWELL | downconverter | 195 | WR42 Downconv.,RF=18-26.5GHz,LO=9-13GHz +16dBm,IF=1M-1G,15V | 1 |
| HONEYWELL | FK-U | 195 | WR42 Mixer,RF/LO=18-26.5 GHz,LO=+3 dBm,amplified IF=1-1000MHz | 1 |
| HONEYWELL | K2000N | 225 | WR42 Frequency Doubler, 9.0-13.25 GHz +18 dBm in, 18.0-26.5 GHz +6 dBm out | 3 |
| HONEYWELL | K5000N | 225 | WR42 Balanced Mixer, RF/LO=18-26.5 GHz, LO=+10 dBm, IF=DC-1 GHz | 1 |
| HP/KEYSIGHT | 00901-60001 | 195 | WR42 Low Power Termination, 0.5 Watt, 1.02 VSWR | 1 |
| HP/KEYSIGHT | 08747-60012 | 295 | WR42 2-Way Power Splitter, 6 dB split ratio, 40 dB return loss | 1 |
| HP/KEYSIGHT | 11517A/19A/20A | 375 | Waveguide Mixer Set, 18.0-40.0 GHz coverage, for HP 8555A, 8565A | 2 |
| HP/KEYSIGHT | 11970K | 95 | WR42 Harmonic Mixer, 18.0-26.5 GHz, for use with Keysight analyzers | 13 |
| HP/KEYSIGHT | K281C | 495 | WR42 x 3.5mm(f) Adapter, VSWR <1.07 | 11 |
| HP/KEYSIGHT | K281C-006 | 495 | WR42 x 3.5mm(f) Adapter, VSWR<1.07, drilled for guide pins | 4 |
| HP/KEYSIGHT | K281C-012 | 495 | WR42 x 3.5mm(m) Adapter, 1.07 VSWR | 3 |
| HP/KEYSIGHT | K362A | 275 | WR42 Low Pass Filter, 31 GHz (-30 dB) cutoff | 13 |
| HP/KEYSIGHT | K372D | 185 | WR42 Precision Fixed Attenuator, 20 dB | 1 |
| HP/KEYSIGHT | K375A | 295 | WR42 Direct Reading Variable Attenuator, 0-20 dB | 6 |
| HP/KEYSIGHT | K382A | 895 | WR42 Precision Direct Reading Attenuator, 0-50 dB | 14 |
| HP/KEYSIGHT | K422A | 250 | WR42 Broadband Crystal Detector, negative polarity | 10 |
| HP/KEYSIGHT | K422A-003 | 250 | WR42 Broadband Crystal Detector, positive polarity | 1 |
| HP/KEYSIGHT | K486A | 500 | WR42 Thermistor Mount, for HP 432 series power meters | 3 |
| HP/KEYSIGHT | K532A | 195 | WR42 Direct Reading Frequency Meter, 0.11% accuracy | 9 |
| HP/KEYSIGHT | K752A | 375 | WR42 Directional Coupler, 3 dB coupling | 17 |
| HP/KEYSIGHT | K752C | 375 | WR42 Directional Coupler, 10 dB coupling | 9 |
| HP/KEYSIGHT | K752D | 375 | WR42 Directional Coupler, 20 dB coupling | 12 |
| HP/KEYSIGHT | K815B/814A/446B | 450 | WR42 Slotted Line, with carriage and detector | 2 |
| HP/KEYSIGHT | K870A | 300 | WR42 Slide Screw Tuner, dual micrometer drives | 2 |
| HP/KEYSIGHT | K914A | 150 | WR42 Moving Load, unalibrated drive | 1 |
| HP/KEYSIGHT | K914B | 250 | WR42 Moving Load, uncalibrated drive | 8 |
| HP/KEYSIGHT | K920B | 285 | WR42 Adjustable Short, micrometer drive | 2 |
| HP/KEYSIGHT | K920B | 285 | WR42 Adjustable Short, micrometer drive | 1 |
| HUGHES | 45320H-1310 | 425 | WR42 Directional Coupler, 10 dB coupling | 1 |
| HUGHES | 45350H-2220 | 200 | WR42 3-Port Crossguide Coupler, 20 dB coupling | 1 |
| HUGHES | 45410H-2090 | 50 | WR42 90 degree Twist Section, 2-9/16 inches length | 1 |
| HUGHES | 45520H-2000 | 350 | WR42 Manual 4-Position 4-Port Switch, H-Plane | 1 |
| HUGHES | 47340H-2100 | 150 | WR42 Tunable Single Ended Harmonic Mixer, 18.0-26.5 GHz | 1 |
| JUNCTION DEVICES | 132K1 | 110 | WR42 Junction Isolator with power load, 10 Watts maximum, 20-23 GHz, 20 dB isolation, 0.85 inch length | 2 |
| JUNCTION DEVICES | JDI-132KI | 225 | WR42 High Power Isolator, 25 dB, 20-23 GHz, 25 Watts | 6 |
| LRL | 832-2 | 50 | WR42 90 degree E-Plane Bend | 1 |
| LRL | 833 | 50 | WR42 90 degree H-Plane Bend, cover/choke flanges | 1 |
| LRL | WR42 twist | 50 | WR42 90 degree Twist Section, brass, 2.85 inch length | 3 |
| M WAVE DESIGN | 42CA1276 | 135 | WR42 x N(f) Adapter, 18-22 GHz | 2 |
| M/A-COM | 3-42-400/03 | 375 | WR42 Directional Coupler, 3 dB coupling | 1 |
| M/A-COM | 4-42-720-02 | 285 | WR42 Broadband Detector, negative polarity | 2 |
| M2 GLOBAL | 094-902678-201 | 45 | WR42 Isolator, 20 dB, 17.7-19.7 GHz, 0.5 inch insertion length | 2 |
| MAURY MICROWAVE | K103A4 | 90 | WR42 Standard Section, 4 inches length | 1 |
| MAURY MICROWAVE | K135A | 50 | WR42 90 degree H-Plane Bend | 1 |
| MAURY MICROWAVE | K145 | 60 | WR42 90 degree Twist Section, 4 inches length | 1 |
| MAURY MICROWAVE | K152 | 145 | WR42 Hybrid Tee, 2.5 inches length | 1 |
| MAURY MICROWAVE | K200A1 | 295 | WR42 x 3.5mm(f) Adapter, 1.10 VSWR | 3 |
| MAURY MICROWAVE | K200A8 | 245 | WR42 x 3.5mm(f) Adapter, 1.25 VSWR | 1 |
| MAURY MICROWAVE | K200B1 | 295 | WR42 x 3.5mm(m) Adapter, 1.10 VSWR | 1 |
| MAURY MICROWAVE | K210C | 150 | WR42 x SMA(f) Adapter, VSWR <1.20 | 1 |
| MAURY MICROWAVE | K211C1 | 195 | WR42 x SMA(m) Adapter, VSWR <1.10 | 6 |
| MAURY MICROWAVE | K230A | 175 | WR42 x SMA(f) End Launch Adapter, 1.25 VSWR | 1 |
| MAURY MICROWAVE | K230K6 | 325 | WR42 x NMD3.5 female Adapter | 1 |
| MAURY MICROWAVE | K309A | 145 | WR42 Ambient Temperature Load, with -5 to +45 deg.C thermometer attached | 1 |
| MAURY MICROWAVE | K320D | 235 | WR42 Standard Mismatch, 1.20 VSWR | 1 |
| MAURY MICROWAVE | K344A | 90 | WR42 Flush Short | 1 |
| MAURY MICROWAVE | K351 | 295 | WR42 5-Probe Tuner, matches 1.10 VSWR to <1.01, vernier drives | 2 |
| MAURY MICROWAVE | MT7021A | 350 | WR42 Cryogenic Termination, 18.0-26.5 GHz, 1.08 VSWR, with heater and dewar, 2 PSI helium pressurization required | 1 |
| MCCI WIRELESS | 20CIST-24 | 185 | WR42 Straight Section, 24 inches length, silver/brass | 4 |
| MDL | 42AT16-1A | 85 | WR42 Level Set Attenuator, 0.5-20 dB, screwdriver adj., 1.30 inch length | 2 |
| MDL | 42LW36-1E | 90 | WR42 Short Body Termination, 0.5 Watt, 1.20 VSWR, 1.16 inch length | 1 |
| MDL | 42TW18-3E | 50 | WR42 90 degree Twist Section, 1.3 inch length, choke flanges | 1 |
| MICROTECH | 231444 | 145 | WR42 Jacketed Flexible Twistable Waveguide, 12 inches length, cover/choke | 2 |
| MICROTECH | 232531 | 175 | WR42 Jacketed Flexible Twistable Waveguide 24 inches length, cover/choke | 1 |
| MICROTECH | 233643-2 | 165 | WR42 Jacketed Flexible-Twistable Waveguide Section, 26 in. length | 1 |
| MICROTECH | 233880 | 125 | WR42 Twistable / Flexible Waveguide, 24.5 inches length, choke flanges, brass | 2 |
| MICROTECH | MCKS-42-500-V-12B | 95 | WR42 Jacketed Flexible Waveguide, 12 inches length, brass | 2 |
| MICROTECH | MTPS-42UUN22B | 185 | WR42 Jacketed Flexible-Twistable Waveguide Section, 22 in. length *new old stock* | 5 |
| MICROWAVE ASSOCIATES | 654A | 300 | WR42 E-H Plane Tuner, micrometer drives | 1 |
| MICROWAVE ASSOCIATES | MA-555 | 50 | WR42 90 degree E-Plane Bend | 1 |
| MICROWAVE ASSOCIATES | MA-618 | 85 | WR42 E-Plane (Series) Tee | 1 |
| MICROWAVE ASSOCIATES | MA-757B | 165 | WR42 Directional Coupler, 20 dB coupling | 1 |
| MICROWAVE ASSOCIATES | MA-915 | 95 | WR42 Tunable Detector, negative polarity, BNC(f) output | 1 |
| MICROWAVE ASSOCIATES | WR42 hybrid tee | 145 | WR42 Hybrid Tee, 2.5 inches length | 1 |
| MICROWAVE RESEARCH | K40-17M | 125 | WR42 x SMA(m) Adapter | 1 |
| MIDWEST MICROWAVE | 3688 | 225 | WR42 x 3.5mm(f) Adapter | 1 |
| MILLIMETER PRODUCTS | 172K/595-20.7 | 85 | Junction Isolator, 20 dB, 19.7-21.7 GHz, 0.88 inch insertion length | 1 |
| MILLITECH | 45430H-2006 | 65 | WR42 Straight Section, 6 inches length | 1 |
| MILLITECH | 45740H-2010 | 110 | WR42 Fixed Attenuator, 10 dB, 0.5 Watt maximum | 1 |
| MITEC | M1640-11-6-N | 60 | WR42 Jacketed Flexible Section, 6 inches length, brass, choke/ choke flanges | 1 |
| MITEC | WR42 twist | 50 | WR42 90 degree Twist Section, 1.5 inch length, cover/choke flanges, silver/brass | 13 |
| MPI | 511K-488/595 | 450 | WR42 Programmable 0-60 dB Rotary Vane Attenuator, manual or GPIB control, 28 V 1A | 1 |
| MW. DEVELOPMENT CO, | 66042-535 | 45 | WR42 Straight Section, 4.5 inches length, aluminum | 9 |
| MW. DEVELOPMENT CO. | 51042-20 | 300 | WR42 Directional Coupler, 20 dB coupling | 1 |
| MW. DEVELOPMENT CO. | 76042-179 | 85 | WR42 Fixed Attenuator, 65 dB, 1 Watt maximum | 20 |
| M-WAVE DESIGN | 42FA11B-50 | 60 | WR42 Straight Section, 6.08 inches length, brass | 1 |
| M-WAVE DESIGN | 42SC2-10 | 275 | WR42 Directional Coupler, 10 dB coupling | 2 |
| M-WAVE DESIGNS | 42EB1204 | 50 | WR42 90 degree E-Plane Bend | 2 |
| NARDA | 1068-03 | 350 | WR42 Directional Coupler, 3 dB coupling | 1 |
| NARDA | 1068-20 | 350 | WR42 Directional Coupler, 20 dB coupling | 1 |
| NARDA | 358 | 50 | WR42 90 degree Twist Section, 3 inches length | 1 |
| NARDA | 378 | 1455 | WR42 Sliding Termination, uncalibrated drive | 1 |
| NARDA | 4608B | 250 | WR42 x 3.5mm(f) Adapter | 3 |
| NARDA | 508 | 135 | WR42 Tunable Detector, positive polarity, lockable drive, BNC(f) output | 1 |
| NARDA | 518 | 95 | WR42 Tunable Single Ended Mixer, N(f) IF port | 1 |
| NARDA | 638 | 395 | WR42 Standard Gain Horn, 16 dBi gain mid-band | 1 |
| NARDA | 718-03 | 100 | WR42 Fixed Attenuator, 3 dB, 1 Watt maximum | 1 |
| NARDA | 728 | 165 | WR42 Direct Reading Variable Attenuator, 0-20 dB | 1 |
| NDL | K611 | 225 | WR42 Slide Screw Tuner, micrometer drive | 1 |
| OMEGA LABS | 3610 | 60 | WR42 H-Plane (Shunt) Tee | 2 |
| OMNI-SPECTRA | 2000-6256-00 | 125 | WR42 x SMA(f) Adapter *new old stock* | 5 |
| OMNI-SPECTRA | 20188/AJ | 135 | WR42 x SMA(f) Adapter | 1 |
| PACIFIC MILLIMETER | 24-SSB | 200 | WR42 SSB Modulator, LO=24.0-24.8 GHz, IF=DC-100 MHz +8 dBm | 1 |
| PENN ENGINEERING | 2034-11B-NB | 50 | WR42 90 degree E-Plane Bend | 1 |
| PENN ENGINEERING | 3634-11B10 | 110 | WR42 10 dB Fixed Attenuator, 1 Watt maximum power | 2 |
| PENN ENGINEERING | 3634-11B30 | 110 | WR42 30 dB Fixed Attenuator, 1 Watt maximum power | 2 |
| PENN ENGINEERING | 3940 | 150 | WR42 x 3.5mm(f) Adapter | 1 |
| PENN ENGINEERING | 4034-11B12-NB | 100 | WR42 Straight Section, 24 inches length, brass | 1 |
| PENN ENGINEERING | 4548-51BM3 | 195 | WR42 x CPR137 Taper Section, 12 inches length, silver plated brass | 1 |
| PENN ENGINEERING | 5934-1111B30-NB | 350 | WR42 Dual Arm Broadwall Coupler, 30 dB coupling, both coupled arms unterminated | 1 |
| POLARAD | XM18 | 125 | WR42 Tunable Detector ort Single Ended Mixer, positive polarity | 2 |
| PRD | 1205-7A | 95 | WR42 Tunable Single Ended Mixer, IF port N(f), 1N26 diode | 1 |
| PRD | 1406-BF1 | 90 | WR42 Standard Mismatch, 26 dB return loss | 1 |
| PRD | 1406B-F1 | 85 | WR42 Standard Reflection, 1.10 VSWR, 0.05 reflection coeficient | 1 |
| PRD | 313 | 275 | WR42 E-H Plane Tuner, micrometer drives, 4.5 inches insertion length | 1 |
| PRD | 313A | 275 | WR42 E-H Plane Tuner, micrometer drives | 1 |
| PRD | 313AF1 | 300 | WR42 E-H Plane Tuner, micrometer drives | 2 |
| PRD | 321 | 195 | WR42 Sliding Short, micrometer drive | 1 |
| PRD | 321-AF1 | 175 | WR42 Sliding Short, micrometer reading | 3 |
| PRD | K-101 | 495 | WR42 Precision Direct Reading Attenuator, 0-60 dB | 1 |
| PRD | K-3414 | 50 | WR42 90 degree Twist, 3 inches length | 1 |
| PRD | K414-10F1 | 295 | WR42 Directional Coupler, 10 dB coupling | 2 |
| QUASAR MICROWAVE | QFA20SQB44244B10 | 115 | WR42 Fixed Attenuator, 10 dB, 1/2 Watt maximum | 12 |
| QUASAR MICROWAVE | WR42 26" flex | 165 | WR42 Jacketed Flexible / Twistable Section, 26 in., cover/choke | 1 |
| QUINSTAR | QJR-K10300 | 275 | WR42 Directional Coupler, 10 dB coupling, split block construction | 2 |
| QUINSTAR | QWS-K-020-00 | 40 | WR42 Straight Section, 2 inches length, gold flashed *new old stock* | 3 |
| QUINSTAR | QWS-K-030-00 | 50 | WR42 Straight Section, 3 inches length, gold flashed *new old stock* | 20 |
| SCIENTIFIC ATLANTA | 14-6-1 | 195 | WR42 Single-Ended Harmonic Mixer, 18.0-26.5 GHz, for 1780 rcvr. | 2 |
| SCIENTIFIC ATLANTA | 14-6-2 | 195 | WR42 Single-Ended Harmonic Mixer, 18.0-26.5 GHz, for 1711 rcvr. | 2 |
| SECTOR MICROWAVE | KMP | 250 | WR42 Manual DPDT Transfer Switch | 1 |
| SONOMA SCIENTIFIC | 21A2 | 75 | WR42 Junction Isolator, 20 dB, 18.5-24.5 GHz | 45 |
| SONOMA SCIENTIFIC | 21A4 | 75 | WR42 Circulator, 20.6-24.8 GHz, 20 dB isolation | 2 |
| SPACEK LABS | 2X22-12 | 195 | WR42 Mixer,RF=20-26 GHz, doubled LO 13-17 GHz +18 dBm,IF=6-12GHz | 1 |
| SPACEK LABS | MKKa-7 | 325 | Mixer, 18-26.5G (WR42) RF, 26-40G +7 dBm (WR28) LO, IF=DC-14G | 1 |
| SPERRY | 413A | 165 | WR42 3-port (terminated) Crossguide Coupler, 20 dB coupling | 1 |
| SPERRY | 44K2-30 | 185 | WR42 3-Port Crossguide Coupler, 30 dB coupling | 1 |
| SPINNER | BN-569601 | 165 | WR42 Sliding Short, vernier drive | 1 |
| SYSTRON DONNER | 110571 | 95 | WR42 Single Ended Broadband Mixer, 18.0-26.5 GHz | 2 |
| SYSTRON DONNER | 7123A | 95 | WR42 Single Ended Mixer, for spectrum analyzers | 1 |
| SYSTRON DONNER | DBE-276 | 65 | WR42 Pressurization Section, 3-1/2 in, length, dual 3/8" NPT inputs, choke flanges | 2 |
| SYSTRON DONNER | DBEF-018 | 165 | WR42 x WR62 Waveguide Taper, 3.75 inches length | 3 |
| TECHNICRAFT | S-492-12 | 95 | WR42v Jacketed Flexible Waveguide, 12 inches length, silver/ brass | 1 |
| TECHNICRAFT | TS-49140-2 | 115 | WR42 Jacketed Flexible Waveguide Section, 24 in., cover/choke fl | 1 |
| TECHNICRAFT | TS-49-4A-8-N | 60 | WR42 Jacketed Flexible Waveguide, 8 inches length, aluminum, cover/choke flanges | 1 |
| TEKTRONIX | 119-0098-00 | 95 | WR42 Single Ended Broadband Mixer | 1 |
| TEKTRONIX | WM780K | 195 | WR42 Harmonic Mixer, 18.0-26.5 GHz, bias required | 1 |
| THALES | 20D-9772 | 45 | WR42 Isolator, 20 dB, 17.7-19.7 GHz, 0.5 inch insertion length | 2 |
| TRG | 580K/595 | 115 | WR42 Low Power Termination, 1 Watt maximum, 1.05 VSWR | 1 |
| TRG | K510 | 495 | WR42 Precision Direct Reading Attenuator, 0-50 dB | 1 |
| TRG | K590 | 195 | WR42 Adjustable Short, micrometer drive | 1 |
| UNIQUE BROADBAND | 883322 | 45 | WR42 Straight Section, 4.5 inches length, brass | 1 |
| WAVELINE | 80033 | 195 | WR42 Level Set Atten., 1-30 dB, 1 Watt max., uncalibrated drive | 2 |
| WAVELINE | 80176 | 235 | WR42 Slide Screw Tuner, vernier read | 1 |
| WAVELINE | 801-WLM | 125 | WR42 x SMA(f) Adapter | 1 |
| WAVELINE | 802-20 | 150 | WR42 Fixed Rotary Vane Attenuator, 20 dB, accuracy 0.5 dB, 2 Watts maximum, 7.38 inches length, aluminum | 1 |
| WAVELINE | 803 | 225 | WR42 Direct Reading Variable Attenuator, 0-20 dB | 3 |
| WAVELINE | 806-30 | 100 | WR42 30 dB Fixed Attenuator, 1 Watt maximum | 1 |
| WAVELINE | 808-C | 250 | WR42 Variable Phase Shifter, 0-180 degrees, dial gage read, 0.5 dB maximum insertion loss | 1 |
| WAVELINE | 822 | 695 | WR42 Precision Direct Reading Attenuator, 0-60 dB | 2 |
| WAVELINE | 832 | 50 | WR42 90 degree E-Plane Bend, cover/choke flanges | 2 |
| WAVELINE | 832-2 | 50 | WR42 90 degree E-Plane Bend | 1 |
| WAVELINE | 833-2 | 50 | WR42 90 degree H-Plane Bend | 1 |
| WAVELINE | 842-1-06 | 50 | WR42 Straight Section, 6 inches length, brass, choke flanges | 2 |
| WAVELINE | 857 | 150 | WR42 Hybrid Tee | 1 |
| WAVELINE | 861 | 175 | WR42 Adjustable Short, micrometer drive | 1 |
| WAVELINE | 869-20 | 185 | WR42 4-Port Crossguide Coupler, 20 dB coupling | 1 |
| WAVELINE | 874-03 | 295 | WR42 Directional Coupler, 3 dB coupling | 5 |
| WAVELINE | 874-10 | 295 | WR42 Directional Coupler, 10 dB coupling | 2 |
| WAVELINE | 874-20 | 295 | WR42 Directional Coupler, 20 dB coupling | 3 |
| WAVELINE | 878-E | 350 | WR42 4-Port Manual Transfer Switch, E-Plane switching | 3 |
| WAVELINE | 883 | 265 | WR42 Slide Screw Tuner, micrometer probe drive | 2 |
| WAVELINE | 890 | 50 | WR42 90 degree Twist Section, 4 inches length, cover/choke fl's | 2 |
| WAVELINE | 890-2 | 50 | WR42 90 degree Twist Section, 4 inches length | 1 |
| WILTRON | 35WR42K | 275 | WR42 x 2.92mm(m) Adapter, 1.25 VSWR | 6 |
| WISEWAVE | FIF-42-01 | 100 | WR42 Junction Isolator, 20 dB, 17.2-24.1 GHz, 0.88 inch insertion length | 1 |
| WISEWAVE | FIF-42-11 | 95 | WR42 Junction Isolator, 18 dB, 18.0-26.5 GHz, 0.87 inch length | 1 |
| WISEWAVE | FIF-422207/18-01 | 85 | WR42 Junction Isolator, 18 dB, 17.2-24.1 GHz, 0.87 inch length | 1 |
| WISEWAVE | FJI-42220718 | 100 | WR42 Junction Isolator, 20 dB, 17.2-24.1 GHz, 0.88 inch insertion length | 1 |
| | | | WR51 WAVEGUIDE: 15.0-22.0 GHz | |
| 3 dBm, INC. | NP170 | 75 | WR51 (UBR180 flange) x WR62 Taper *new old stock* | 16 |
| ATM | 51-780-7-115V | 500 | WR51 High Power Load, 1.2 kW average/ 150 kW peak, choke flange | 1 |
| BOEING | 7914608-002 | 100 | WR51 Level Set Attenuator, 0-10 dB, 2.38 inches length | 1 |
| CABLEWAVE | WR51 x WR42 | 165 | WR51 (choke flange) x WR42 Taper Section, brass, 3 inches length | 1 |
| CHANNEL MICROWAVE | 0327 | 145 | WR51 Circulator, 20 dB isolation, 15.5-21.5 GHz, 1.25 inch length | 2 |
| CHANNEL MICROWAVE | JO-323 | 185 | WR51 Circul;ator, 20 dB isolation, 16-21 GHz, 1.28 inch insertion length | 1 |
| CHANNEL MICROWAVE | MO-320 | 395 | WR51 High Power Double Pass Isolator, 23 dB isolation, 16-19 GHz, <1.2 dB insertion loss, 300 Watts power handling, forced air cooled load | 1 |
| CMT | AR51-6-1B1B-C | 135 | WR51 Fixed Attenuator, 6 dB, 1 Watt maximum power | 2 |
| CMT | BFU51-1B1B-C | 95 | WR51 Bulkhead Feedthrough Unit, 3 inches length, mounting on a 3.25 inch diameter 8-hole plate | 2 |
| CMT | RA51-3.5MM-F-1A-A | 195 | WR51 x 3.5mm(f) Adapter | 2 |
| CMT | RFG51-11-1B1BNC | 115 | WR51 Unjacketed Flexible Section, 11 inches length, brass, cover flanges | 4 |
| CMT | RFG51-7.5-1B1BNC | 85 | WR51 Unjacketed Flexible Section, 7.5 inches length, brass, cover flanges | 4 |
| CMT | RHB51-1A1A-1.5-A | 65 | WR51 90 degree H-Plane Bend, 1.5 inch bend radius, aluminum | 1 |
| CMT | RHB51-1A1A-4.0-1.5-A | 65 | WR51 Assymetrical 90 degree H-Plane Bend, 1.5 x 4.0 inch legs, aluminum | 3 |
| CMT/ COBHAM | RBCC51-K-F-10-1A1A1A | 495 | WR51 Directional Coupler, 10 dB coupling, 2.92mm(f) coupled port *new old stock* | 2 |
| FLANN MICROWAVE | 1911 | 1100 | WR51 Precision Direct Reading Attenuator, 0-60 dB, UBR180 flange | 1 |
| GENERIC | WR51 18.75" flex | 125 | WR51 Jacketed Flexible Waveguide Section, 18.75 inches length, aluminum, formed with a 90 degree twist, choke flanges | 1 |
| GENERIC | WR51 2.5" flex | 45 | WR51 Unjacketed Flexible Section, cover/choke flanges | 1 |
| GENERIC | WR51 4" flex | 60 | WR51 Unjacketed Flex Waveguide Section, 4 in., cover/choke fl's | 3 |
| GENERIC | WR51 6.75" flex | 85 | WR51 Unjacketed Flex Waveguide, 6.75", one flange is modified UG595/U on WR51 flex waveguide | 2 |
| GENERIC | WR51 BSS x WR62 | 25 | Step Transition from WR51 Boeing Satellite Systems 6-hole Flange to WR62 (UG419) Flange, 0.2 inch thick, aluminum | 9 |
| GENERIC | WR51 bulkhead x SMA(f) | 100 | WR51 Panel Mounting Adapter to SMA(f), 2x2 inch panel mount plate, 1.88x1.88 inch mounting holes pattern | 1 |
| GENERIC | WR51 flange adapter | 75 | WR51 Flange Adapter, UG419/U(mod) flange to UG595/U(mod) flange, 3 inches length | 1 |
| GENERIC | WR51 step transition | 85 | WR51 Straight Section, 3 inches length, one flange is modified UG595/U on WR51 waveguide | 3 |
| GENERIC | WR51 termination | 40 | WR51 Short Body Termination, 2 Watts, 0.62 inch length, aluminum | 2 |
| GENERIC | WR51 UBR180 E bend | 45 | WR51 (UBR180 flange) 90 degree E-Plane Bend, brass, 1.2 inch bend radius | 1 |
| GENERIC | WR51 UG x UBR180 | 75 | WR51 UG flange to UBR180 flange Adapter, 2 inches length, brass | 1 |
| GENERIC | WR51 x WR62 taper | 100 | WR51 x WR62 Taper Section, 2.375 inches length, brass | 1 |
| GHZ MICROWAVE | M-226 | 65 | WR51 90 degree H-Plane Bend | 1 |
| GHZ MICROWAVE | N110-3.0 | 65 | WR51 Straight Section, 3 inches length, cover/choke flanges | 1 |
| GHZ MICROWAVE | N-110-BSC-18 | 145 | WR51 Straight Sectiion, 18 inches length, brass | 1 |
| HASCO | HA51A-35F-SP | 145 | WR51 (Boeing Satellite Systems 1.00 x 0.92 inch 6-hole flange) x 3.5mm(f) Adapter | 1 |
| HASCO | HA51H90-CVT-CVS | 65 | WR51 90 degree H-Plane Bend | 2 |
| HASCO | WR51 14" flex | 125 | WR51 Unjacketed Flexible Waveguide Section, 14 inches length | 6 |
| HNL, INC. | LPT-51-7A-A | 165 | WR51 Low Power Termination, choke flange, 1 Watt, 1.05 VSWR | 1 |
| HNL, INC. | WT51-62-7A-1AA | 150 | WR51 (choke flange) x WR62 (cover flange) Taper, 3.88 inches length, aluminum | 2 |
| HP/KEYSIGHT | NK292A | 100 | WR51 (UBR180 flange) x WR42 Waveguide Taper | 15 |
| HP/KEYSIGHT | NP292A | 100 | WR51 (UBR180 flange) x WR62 Taper | 20 |
| HUGHES | b126413 | 125 | wr51 Level Set Attenuator, 0-30 dB, value set by rod for vane penetration, 1 Watt max., 2.9 inches length, silver/brass, cover/choke flanges | 1 |
| LIEDER DEVELOPMENT | WR51 term | 115 | WR51 Medium Power Termination, 25 Watts | 2 |
| MAURY MICROWAVE | N200A2 | 325 | WR51 x 3.5mm(f) Adapter, 1.05 VSWR | 2 |
| MAURY MICROWAVE | N200B2 | 325 | WR51 x 3.5mm(m) Adapter, 1.05 VSWR | 3 |
| MAURY MICROWAVE | N230A | 195 | WR51 x 3.5mm(f) End Launch Adapter, 1.25 VSWR | 1 |
| MAURY MICROWAVE | N230B3 | 195 | WR51 x 3.5mm male End Launch Adapter, 1.20 VSWR | 10 |
| MAURY MICROWAVE | N230P24 | 195 | WR51 (modified UG595/U flange) x 3.5mm(f) End Launch Adapter | 1 |
| MAURY MICROWAVE | N750B | 265 | WR51 Full Band Isolator, 20 db, 15-22 GHz | 1 |
| MITEC | M2899 | 300 | WR51 High Power Isolator Assy., 20 dB, 16-18 GHz, 150 Watts average | 1 |
| MITEC | WR51 24" flex | 175 | WR51 Flexible-Twistable Waveguide Section, 24 in., cover/choke | 1 |
| M-WAVE DESIGN | 51CA1208 | 175 | WR51 (Boeing Sat. Systems 6-hole flange) x 3.5mm(f) Adapter | 1 |
| NIPPON ELECTRIC | 407 | 45 | WR51 (UBR180) Short Body Termination,1 Watt, 0.63 inch length, UBR180 flange | 4 |
| NIPPON ELECTRIC | 95085 | 75 | WR51 (UBR180) Circulator, 20 dB isolation, 18.1-19.7 GHz, UBR180 flange, 1.25 inch length | 11 |
| NIPPON ELECTRIC | UBR180 flex | 65 | WR51 (UBR180) Jacketed Flexible Waveguide Section, 4 inches length, silver/brass, UBR180 flanges | 1 |
| NIPPON ELECTRIC | WR51 UBR180 x SMA(f) | 125 | WR%! (UBR180 flange) x SMA(f) Adapter, silver/brass | 1 |
| NIPPON ELECTRIC CO. | 92262B0 | 90 | WR51 (UBR180 flange) Band Pass Filter, 19.275-19.475 GHz, 2.75 inches length, silver/brass | 1 |
| NIPPON ELECTRIC CO. | UBR180 crossguide cplr | 75 | WR51 (UBR180 flange) 3-port Crossguide Coupler, 26 dB coupling, 1.25 inches length, brass | 1 |
| OMEGA LABS | 2782 | 90 | WR51 Tunable Detector | 1 |
| PAMTECH | PYK-1092 | 85 | WR51 Circulator, 18 dB isolation, 18-22 GHz, 1.5 inch length | 1 |
| PASTERNACK | PE9828 | 165 | WR51 x SMA(f) Adapter *new old stock* | 1 |
| PENN ENGINEERING | 1436-1BM2 | 175 | WR51 (Boeing Satellite Systems 6-hole flange) x 3.5mm(f) Adapter | 1 |
| PENN ENGINEERING | 1436-1B-NB | 165 | WR51 x SMA(f) Adapter | 1 |
| PENN ENGINEERING | 3946 | 135 | WR51 x SMA(f) Adapter | 2 |
| PENN ENGINEERING | 7136-1A | 165 | WR51 Low Power Termination, 1 Watt, 1.02 VSWR | 1 |
| PENN ENGINEERING | 7336-1AM4 | 250 | WR51 Termination , 100 Watts average/ 90 kW peak | 8 |
| SPECIALTY MICROWAVE | A51S | 150 | WR51 x SMA(f) Adapter | 3 |
| WAVELINE | 5122 | 875 | WR51 Precision Direct Reading Attenuator, 0-60 dB | 5 |
| WAVELINE | 5174-10 | 425 | WR51 Directional Coupler, 10 dB coupling | 2 |
| WAVELINE | 5174-20 | 425 | WR51 Directional Coupler, 20 dB coupling | 3 |
| WAVELINE | 5181 | 285 | WR51 Medium Power Termination, 100 Watts average/ 160 kW peak | 4 |
| WAVELINE | 5187 | 395 | WR51 High Power Load, 350 Watts average power | 1 |
| | | | WR62 WAVEGUIDE: 12.4-18.0 GHz | |
| 3 dBm, INC. | 473-001981 | 95 | WR62 In-Line Rotary Joint, 12.4-16.4 GHz, 4.16 inches length, aluminum | 1 |
| 3 dBm, INC. | KUW1151S | 195 | WR62 Shielded Isolator, 30 dB, 12.4-18.0 GHz | 2 |
| 3 dBm, INC. | P170-8-1-1-N | 65 | WR62 Jacketed Flexible Waveguide, 8 inches length, brass | 3 |
| 3 dBm, INC. | P-175-S | 95 | WR62 x SMA(f) Adapter | 3 |
| 3 dBm, INC. | WR62 10 dB atten | 50 | WR62 10 dB Fixed Attenuator, 3 inches length, choke flanges | 1 |
| A.E.L. | H-6102 | 185 | WR62 Left Hand Circular Polarization Horn, 10-12 dBi gain, 50-55 degrees 3 dB beamwidth, 150W masximum power | 1 |
| AIRCOM | 104-KU | 40 | WR62 90 degree H-Plane Bend | 10 |
| AIRTRON | AF-2B-062-24 | 110 | WR62 Jacketed Flexible Waveguide, 24 inches length, silver/brass | 4 |
| AIRTRON | AF-3-B-062-600 | 50 | WR62 Jacketed Flexible Waveguide, 6 inches length, silver/brass, cover/choke flanges | 2 |
| AIRTRON | AT-3B-062-24 | 110 | WR62 Jacketed Flexible Waveguide, 24 inches length, silver/brass, cover/choke flanges | 2 |
| AIRTRON | AT6=B-062-6000 | 195 | WR62 Flexible Waveguide Section, 60 inches length, aluminum | 1 |
| AIRTRON | AT-7-B-062-600 | 50 | WR62 Jackreted Flexible Waveguide, 6 inches length, aluminum, cover/choke flanges | 1 |
| AIRTRON | BN-212-1800 | 85 | WR62 Jacketed Flexible Waveguide, 18 inches length, silver/brass | 2 |
| AIRTRON | P50290 | 35 | WR62 Straight Section, 3.5 inches length, choke flanges, brass | 3 |
| ALCATEL | 904225-1 | 65 | WR62 Short Body Directional Coupler, 6 dB, 13-16.5 GHz, 6"length | 1 |
| ALCATEL | 905521 | 75 | WR62 Circulator, 23 dB isolation, 12.4-14.5 GHz, 1.5 inch length | 22 |
| ANDREW | 53215-12 | 95 | WR62 Flexible/ Twistable Jacketed Waveguide, 12 inches length, brass, cover/choke flanges | 1 |
| ANDREW | A062HMG | 85 | WR62 UG419/U flange to PDR120 flange Adapter, 4 inches length, brass *new old stock* | 1 |
| ANDREW | FO62P40-360BS | 200 | WR62 Flexible Twistable Waveguide, 36 in.length,cover/choke *new old stock* | 1 |
| APOLLO MICRFOWAVES | 80046-2CC | 75 | WR75 45 degree Twist Section, 3.75 inches length, brass | 1 |
| APOLLO MICROWAVES | 15003-1 | 375 | WR62 High Power Load, 450 Watts average/ 160 kW peak, 20 inches length | 2 |
| APOLLO MICROWAVES | 27C3474 | 300 | WR62 (choke flange) High Power Load, 350 Watts average power, 15 inches length | 1 |
| APOLLO MICROWAVES | WR75 med power load | 145 | WR75 Medium Power Load, 75 Watts average power, brass, 4 inches length | 1 |
| ARRA | 062-660B | 75 | WR62 (choke flange) Termination, 1.5 Watt, brass body | 8 |
| ATM | 62-203B-6 | 95 | WR62 X N(f) End Launch Adapter | 2 |
| ATM | 62-251-6 | 95 | WR62 x SMA(f) Adapter, brass body | 1 |
| BRACKE MFG. | 655538 | 275 | WR62 High Power Isolator, 20 dB, 16-18 GHz, 150 Watts average power handling | 1 |
| CMC | 1P226-2V | 90 | WR62 Isolator, 20 dB, 14.25-15.75 GHz, 20 W handling | 7 |
| CMT | 1063637 | 145 | WR62 Liquid Cooled Load, 694 Watts power dissipation for 2 gpm flow | 1 |
| CMT | 20565-001 | 95 | WR62 Precision Fixed Attenuator, 6 dB, 1 Watt maximum, 15.5 inches length | 14 |
| CMT | RBC62-10-1A1A1AA | 235 | WR62 Directional Coupler, 10 dB coupling | 2 |
| CMT | RBC62-10-1A1A1A-A | 235 | WR62 Directional Coupler, 10 dB coupling | 2 |
| CMT | RPS62-60 | 95 | WR62 Power Sampler, 60 dB coupling, SMA(f) coupled port, 0.75 inch length | 1 |
| CMT | WT62-75-8B-7B-B | 100 | WR62 (choke flange) x WR75 (choke flange) Taper Section, 4 inches length, brass | 1 |
| COLEMAN MICROWAVE | 3567152-6 | 90 | WR62 Band Pass Filter, 13.21-14.97 GHz, silver/brass, choke flanges, 5 inches length | 1 |
| COLEMAN MICROWAVE | 8567152-2 | 90 | WR62 Band Pass Filter, 13.295-13.335 GHz, silver/brass, choke flanges, 7 inches length | 1 |
| COLEMAN MICROWAVE | 8567152-5 | 90 | WR62 Band Pass Filter, 13.425-13.475 GHz, silver/brass, choke flanges, 5 inches length | 2 |
| CONNECTICUT MW. | CMM-011 | 75 | WR62 x WR51 (UBR1280 flange) Taper Section, 2.38 inches length, aluminum | 1 |
| DEFENSE COMM. ENG. | 062-225L-03 | 175 | WR62 Directional Coupler, 3 dB coupling | 1 |
| DEFENSE COMM. ENG. | 062-225L-20 | 175 | WR62 Directional Coupler, 20 dB coupling | 1 |
| DEMORNAY BONARDI | DBF-210-12 | 85 | WR62 Straight Section, 12 inches length, brass | 1 |
| DEMORNAY BONARDI | DBF-210-7 | 45 | WR62 Straight Section, 7 inches length | 1 |
| DEMORNAY BONARDI | DBF-234 | 40 | WR62 90 degree H-Plane Bend | 1 |
| DEMORNAY BONARDI | DBF-271-5 | 50 | WR62 45 degree Twist Section, 5 inches length | 1 |
| DEMORNAY BONARDI | DBF-274-5 | 50 | WR62 90 degree Twist Section, 5 inches length | 3 |
| DEMORNAY BONARDI | DBF-275 | 40 | WR62 Feedthru Bulkhead, 3 inches length, brass, 3.25 in. dia. 6-hole mounting plate, cover/choke flanges | 1 |
| DEMORNAY BONARDI | DBF-310 | 75 | WR62 Crystal Detector | 1 |
| DEMORNAY BONARDI | DBF-450 | 85 | WR62 Low Power Termination, 1.015 VSWR, 1.5 Watts maximum | 2 |
| DEMORNAY BONARDI | DBF-460 | 195 | WR62 High Power Termination, 250 Watts average / 190 kW peak | 3 |
| DEMORNAY BONARDI | DBF-460-choke | 195 | WR62 (choke flange) High Power Termination, 250 Watts average/ 190 kW peak | 1 |
| DEMORNAY BONARDI | DBF-464 | 195 | WR62 High Power Termination, 250 Watts average/ 150 kW peak | 2 |
| DEMORNAY BONARDI | DBF-520-20 | 275 | WR62 Standard Gain Horn, 20 dBi gain mid-band | 1 |
| DEMORNAY BONARDI | DBF-610 | 45 | WR62 E-Plane (Series) Tee | 4 |
| DENSITRON | DTH-062-500 | 275 | WR62 (choke flange) High Power Load, 450 Watts average power, 15 inches length | 1 |
| DIAMOND ANTENNA | 949 | 235 | WR62 Standard Gain Horn, 17 dBi gain mid-band | 2 |
| DORADO INTL. | 4IWY15-1 | 110 | WR62 Full Band Junction Isolator, 12.4-18.0 GHz, 20 dB isolation, 0.35 dB insertion loss, 1.2 VSWR, 1.37 inch insertion length *new old stock* | 10 |
| E&M LABS | KU110LI | 150 | WR62 Isolator, 20 dB, 12.4-18.0 GHz, 10 Watts average power maximum | 4 |
| E&M LABS | Ku130LI | 100 | WR62 Isolator, 40 dB, 13.0-15.5 GHz, 10 Watts maximum, 5 inches length | 1 |
| E&M LABS | Ku130LI | 135 | WR62 Isolator, 40 dB, 13.0-16.5 GHz, 10 Watts maximum, 5 inches length | 1 |
| E&M LABS | Ku917LI | 150 | WR62 Isolator, 20 dB, 12.4-18.0 GHz, 10 Watts average power maximum | 6 |
| FARINON | 01-005474-00 | 75 | WR62 Iso-Adapter, 20 dB isol., 12.4-15 GHz, WR62 input/SMA(f) out | 4 |
| FERRITE COMP. | KuC3-511 | 75 | WR62 Circulator, 20 dB, 14-16 GHz, 1-1/2 inch insertion length | 5 |
| FERROCOM | 1571-SMI | 75 | WR62 Iso-Adapter, 20 dB isol., 12.4-15 GHz, SMA(m) input/WR62 out | 1 |
| FLANN MICROWAVE | 18130-10 | 235 | WR62 Directional Coupler, 10 dB coupling, directivity 33 dB | 5 |
| FLANN MICROWAVE | 18131-10 | 295 | WR62 Directional Coupler, 10 dB coupling, directivity 40 dB | 5 |
| FLANN MICROWAVE | 18300-AB | 295 | WR62 Dual Directional Coupler, 10 dB coupling both directions, directivity 33 dB | 2 |
| FXR/MICROLAB | WF-47C | 60 | WR62 Short Body Load, 20 Watts average power, 2.5 inches length, 1.2 VSWR | 2 |
| FXR/MICROLAB | Y157A | 150 | WR62 Isolator, 20 dB, 12.4-18.0 GHz | 2 |
| FXR/MICROLAB | Y164A | 200 | WR62 Precision Direct Readfing Attenuator, 0-50 dB | 2 |
| FXR/MICROLAB | Y175A-10 | 100 | WR62 Fixed Precision Vane Attenuator, 10 dB +/-0.3 dB, 5 Watts maximum, 7.1 inches length | 1 |
| FXR/MICROLAB | Y175A-20 | 100 | WR62 Fixed Precision Vane Attenuator, 20 dB +/-0.5 dB, 5 Watts maximum, 7.1 inches length | 2 |
| FXR/MICROLAB | Y175A-40 | 100 | WR62 Fixed Precision Vane Attenuator, 40 dB +/-1.0 dB, 5 Watts maximum, 7.1 inches length | 2 |
| FXR/MICROLAB | Y205B | 75 | WR62 Tunable Detector Mount, uses 1N78A diode, micrometer driven short, BNC(f) output | 3 |
| FXR/MICROLAB | Y205D | 75 | WR62 Tunable Detector Mount, uses 1N78A diode, lockable micrometer driven short, BNC(f) output | 1 |
| FXR/MICROLAB | Y311A | 125 | WR62 Slide Screw Tuner | 2 |
| FXR/MICROLAB | Y312C | 175 | WR62 E-H Plane Tuner, micrometer drives | 4 |
| FXR/MICROLAB | Y502B | 125 | WR62 Sliding Load, uncalibrated drive, lockable | 1 |
| FXR/MICROLAB | Y610A | 175 | WR62 Directional Coupler, 3 dB coupling | 3 |
| FXR/MICROLAB | Y610C | 175 | WR62 Directional Coupler, 10 dB coupling | 1 |
| FXR/MICROLAB | Y623B | 40 | WR62 90 degree E-Plane Bend | 1 |
| FXR/MICROLAB | Y624A03 | 40 | WR62 90 degree H-Plane Bend, cover/choke flanges | 1 |
| FXR/MICROLAB | Y641A | 150 | WR62 DPDT Transfer Switch, manually operated, switch rotates an H plane bend | 1 |
| GENERIC | WR62 0.63" section | 20 | WR62 Straight Section, 0.63 inch length, milled aluminum bar | 1 |
| GENERIC | WR62 15 dBi horn | 90 | WR62 Pyramidal Horn Antenna, 3.47 inches length, 2.15 x 1.75 inch aperture, aluminum | 1 |
| GENERIC | WR62 16 dBi horn | 90 | WR62 Pyramidal Horn Antenna, 3.85 inches length, 3.10 x 2.75 inch aperture, brass | 1 |
| GENERIC | WR62 16.5 GHz BPFLa | 45 | WR62 3-pole Band Pass Filter, 16.1-16.9 GHz, 2 inches length, brass | 2 |
| GENERIC | WR62 16.5 GHz BPFL-b | 45 | WR62 3-pole Band Pass Filter, 16.1-16.9 GHz, built in a 90 degree swept H-plane bend, brass, cover/choke flanges | 1 |
| GENERIC | WR62 16.6 GHz BPFL | 45 | WR62 3-pole Band Pass Filter, 16.3-16.9 GHz, 2 inches length, brass | 1 |
| GENERIC | WR62 18.5" straight | 95 | WR62 Straight Section, 18.5 inches length, brass, cover/choke flanges | 1 |
| GENERIC | WR62 8" flex | 65 | WR62 Unjacketed Flexible Waveguide, 8 inches length, brass | 1 |
| GENERIC | WR62 9" section | 65 | WR62 Straight Section, 9 inches length, brass | 1 |
| GENERIC | WR62 bulkhead | 25 | WR62 Panel Mounting Bulkhead Feedthru, 1 inch length, 1.93 x 1.93 inch aluminum block on 1.7 x 1.7 inch hole centers | 1 |
| GENERIC | WR62 flex 11.25" | 75 | WR62 Unjacketed Flexible Waveguide, 11.25 inches length, brass | 1 |
| GENERIC | WR62 flex 12.5" | 75 | WR62 Unjacketed Flexible Section, 12.5 inches length, brass | 7 |
| GENERIC | WR62 flex 3.35" | 40 | WR62 Unjacketed Flexible Waveguide, 3.35 inches length, brass, cover/choke flanges | 1 |
| GENERIC | WR62 flex 3.5" | 40 | WR62 Unjacketed Flexible Waveguide, 3.5 inches length, brass | 1 |
| GENERIC | WR62 flex 36" | 115 | WR62 Unjacketed Flexible Waveguide, 36 inches length, silver/brass, cover/choke flanges | 1 |
| GENERIC | WR62 flex 37.5" | 110 | WR62 Unjacketed Flexible Waveguide, 37.5 inches length, silver/brass, cover/choke flanges | 1 |
| GENERIC | WR62 flex 6.25" | 50 | WR62 Jacketed Flexible Waveguide, 6.25 inches length, silver/brass, cover/choke flanges' | 1 |
| GENERIC | WR62 pressurizatiion | 25 | WR62 Pressurization Section, 2.75 inches length, 3/8 NPT inlet, brass, choke flanges | 1 |
| GHZ MICROWAVE | A8516-1 | 90 | WR62 x SMA(m) Adapter | 1 |
| GHz MICROWAVE | P362-40 | 195 | WR62 Directional Coupler, 40 dB coupling | 1 |
| HARRIS FARINON | U140154 | 75 | WR62 Circulator, 20 dB, 13.6-15.8 GHz | 1 |
| HNL, INC. | RS62-1B-1B-12.5C | 85 | WR62 Straight Section, 12.5 inches length, brass | 1 |
| HNL, INC. | RS62-1B-1B-2.59C | 35 | WR62 Straight Section, 2.59 inches length, brass | 1 |
| HNL, INC. | WR62 4" flex | 45 | WR62 Unjacketed Flexible Section, 4 inch length, brass | 2 |
| HP/KEYSIGHT | 08747-60005 | 195 | WR62 2-way Power Splitter, 6 dB split ratio, 40 dB return loss | 2 |
| HP/KEYSIGHT | 08747-60007 | 150 | WR62 Sliding Short, lockable calibrated drive, 5.25 inches travel | 2 |
| HP/KEYSIGHT | 11503A | 85 | WR62 Jacketed Flexible Waveguide, 12.6 inches length, silver/brass | 2 |
| HP/KEYSIGHT | P11644A | 2650 | WR62 Calibration Kit | 1 |
| HP/KEYSIGHT | P281B | 95 | WR62 x APC7 Adapter | 26 |
| HP/KEYSIGHT | P281B-013 | 95 | WR62 x N(f) Adapter | 20 |
| HP/KEYSIGHT | P281C | 295 | WR62 x APC7 Adapter, 1.06 VSWR | 13 |
| HP/KEYSIGHT | P281C-012 | 295 | WR62 x N(m) Adapter, 1.06 VSWR | 2 |
| HP/KEYSIGHT | P281C-013 | 295 | WR62 x N(f) Adapter, 1.06 VSWR | 8 |
| HP/KEYSIGHT | P362A | 235 | WR62 Low Pass Filter, 23 GHz (-30 dB) cutoff | 13 |
| HP/KEYSIGHT | P370B | 85 | WR62 Fixed Attenuator, 6 dB, 1 Watt maximum | 1 |
| HP/KEYSIGHT | P370C | 85 | WR62 Fixed Attenuator, 10 dB, 1 Watt maximum | 5 |
| HP/KEYSIGHT | P370D | 85 | WR62 Fixed Attenuator, 20 dB, 1 Watt maximum | 1 |
| HP/KEYSIGHT | P372C | 175 | WR62 Precision Fixed Attenuator, 10 dB, 2 Watts maximum | 1 |
| HP/KEYSIGHT | P372D | 175 | WR62 Precision Fixed Attenuator, 20 dB, 2 Watts maximum | 4 |
| HP/KEYSIGHT | P375A | 150 | WR62 Direct Reading Variable Attenuator, 0-20 dB, 1 Watt max. | 1 |
| HP/KEYSIGHT | P382A | 300 | WR62 Precision Direct Reading Attenuator, 0-50 dB | 7 |
| HP/KEYSIGHT | P421A | 65 | WR62 Crystal Detector, negative polarity | 1 |
| HP/KEYSIGHT | P424A | 125 | WR62 Crystal Detector, negative polarity | 24 |
| HP/KEYSIGHT | P424A-003 | 125 | WR62 Crystal Detector, positive polarity | 1 |
| HP/KEYSIGHT | P424A-003 | 150 | WR62 Crystal Detector, negative polarity, with matched load | 1 |
| HP/KEYSIGHT | P486A | 250 | WR62 Thermistor Mount, for HP 432 series power meters | 4 |
| HP/KEYSIGHT | P532A | 175 | WR62 Direct Reading Frequency Meter, 0.1% accuracy | 6 |
| HP/KEYSIGHT | P752A | 275 | WR62 Directional Coupler, 3 dB coupling | 23 |
| HP/KEYSIGHT | P752C | 275 | WR62 Directional Coupler, 10 dB coupling | 14 |
| HP/KEYSIGHT | P752D | 275 | WR62 Directional Coupler, 20 dB coupling | 21 |
| HP/KEYSIGHT | P870A | 145 | WR62 Slide Screw Tuner, vernier read | 13 |
| HP/KEYSIGHT | P880A | 195 | WR62 E-H Plane Tuner, micrometer drives | 5 |
| HP/KEYSIGHT | P885A | 400 | WR62 Direct Reading Phase Shifter, 0-360 degrees | 8 |
| HP/KEYSIGHT | P910A | 135 | WR62 Termination, 1 Watt | 13 |
| HP/KEYSIGHT | P914A | 165 | WR62 Moving Load, uncalibrated drive | 9 |
| HP/KEYSIGHT | P920A | 150 | WR62 Adjustable Short, micrometer drive | 1 |
| HP/KEYSIGHT | P920B | 165 | WR62 Adjustable Short, micrometer drive | 11 |
| HP/KEYSIGHT | P932A | 135 | WR62 Harmonic Mixer, for phase locking applications | 2 |
| HUGGINS | HC-8220 | 85 | WR62 Circulator, 17 dB isolation, 12.4-16.0 GHz, 1.5 inch length | 1 |
| HUGGINS | HF-8225 | 195 | WR62 Isolator, 35 dB, 12.4-18.0 GHz | 2 |
| JUNCTION DEVICES | 11P1 | 50 | WR62 Isolator, 25 dB, 12.0-13.5 GHz, 1.3 inch length | 1 |
| JUNCTION DEVICES | 20PI | 50 | WR62 Junction Isolator, 30 dB, 14.0-15.5 GHz, 1.3 inch length | 1 |
| JUNCTION DEVICES | RIP-11 | 150 | WR62 Isolator, 20 dB, 12.4-18.0 GHz, 10 Watts average power, 5 inches length | 1 |
| LEXAN | DA-159/U | 135 | WR62 High Power Load, 250 Watts average/ 160 kW peak | 2 |
| LITTON | 27395 | 50 | WR62 Jacketed Flexible Waveguide, 4.68 inches length, aluminum, cover/choke flanges | 2 |
| LORAL | 174371 | 115 | WR62 Low Pass Filter, 23 GHz -30 dB cutoff | 1 |
| M WAVE DESIGN | 62SA1215-2 | 95 | WR62/CPR62 x SMA(f) End Launch Adapter, drilled for both UG and CPR hole patterns | 2 |
| M.C.S. | P-110-2.5 | 35 | WR62 Straight Section, 2.5 inches length, cover/choke flanges, brass | 1 |
| M.C.S. | P-126 | 40 | WR62 90 degree E-Plane Bend | 1 |
| M.C.S. | P-136 | 40 | WR62 90 degree H-Plane Bend | 1 |
| M.C.S. | P-136-1 | 40 | WR62 90 degree H-Plane Bend, cover/ choke flanges | 3 |
| M.C.S. | P-218-03 | 65 | WR62 Fixed Attenuator, 3 dB at 14.0 GHz | 1 |
| M.C.S. | P-218-06 | 65 | WR62 Fixed Attenuator, 6 dB at 14.0 GHz | 1 |
| M.C.S. | P-218-10 | 65 | WR62 Fixed Attenuator, 10 dB at 14.0 GHz | 1 |
| MAURY MICROWAVE | P200B2 | 175 | WR62 x 3.5mm(m) Adapter, 1.05 VSWR | 1 |
| MAURY MICROWAVE | P209D2 | 150 | WR62 x APC7 Adapter, 1.05 VSWR | 6 |
| MAURY MICROWAVE | P210D2 | 175 | WR62 x SMA(f) Adapter, 1.05 VSWR | 2 |
| MAURY MICROWAVE | P213D2 | 195 | WR62 x N(f) Adapter, 1.05 VSWR | 1 |
| MAURY MICROWAVE | P214D2 | 185 | WR62 x N(m) Adapter, 1.05 VSWR | 2 |
| MAURY MICROWAVE | P216D | 115 | WR62 x TNC(m) Adapter, 1.25 VSWR *UNUSED* | 9 |
| MAURY MICROWAVE | P223A | 125 | WR62 x 3.5mm(f) End Launch Adapter, 1.25 VSWR | 1 |
| MAURY MICROWAVE | P229A | 125 | WR62 x APC7 End Launch Adapter, 1.25 VSWR | 1 |
| MAURY MICROWAVE | P229D | 125 | WR62 x APC7 End Launch Adapter, 1.25 VSWR | 1 |
| MAURY MICROWAVE | P230A | 165 | WR62 x 3.5mm(f) End Launch Adapter, 1.25 VSWR | 1 |
| MAURY MICROWAVE | P230A2 | 185 | WR62 x 3.5mm(f) End Launch Adapter, 1.05 VSWR | 2 |
| MAURY MICROWAVE | P230B | 165 | WR62 x 3.5mm(m) End Launch Adapter, 1.25 VSWR | 1 |
| MAURY MICROWAVE | P314 | 150 | WR62 Sliding Termination, uncalibrated drive, 1.006 VSWR, 1W max | 4 |
| MAURY MICROWAVE | P320D | 150 | WR62 Standard Mismatch, VSWR 1.20 | 3 |
| MAURY MICROWAVE | P344A | 50 | WR62 Flush Short Circuit Termination | 1 |
| MAURY MICROWAVE | P410C | 250 | WR62 Directional Coupler, 10 dB coupling | 1 |
| MAURY MICROWAVE | P750B | 225 | WR62 isolator, 30 dB, 12.4-18.0 GHz | 1 |
| MCS | P-219-B | 75 | WR62 Fixed Attenuator, 10 dB | 1 |
| MDL | 6032904 | 275 | WR62 High Power Isolator, 20 dB, 16-18 GHz, 100 Watts average | 1 |
| MDL | 62AC126-1E | 95 | WR62 x SMA(f) Adapter | 1 |
| MDL | 62AC126-2E | 95 | WR62 (choke flange) x SMA(f) Adapter | 1 |
| MDL | 62AC136-1F | 95 | WR62 x SMA(m) Adapter | 1 |
| MDL | 62AC86-1E | 95 | WR62 x SMA(f) Adapter | 1 |
| MDL | 62AC86-1F | 95 | WR62 x SMA(f) Adapter | 1 |
| MDL | 62BH-18-2A | 40 | WR62 90 degree H-Plane Bend, cover/choke flanges | 3 |
| MDL | 62FP159A | 50 | WR62 Bandpass Filter, 16.39-16.41 GHz, 2 dB insertion loss | 1 |
| MDL | 62PS36-1E | 175 | WR62 Hybrid Phase Shifter, 0-360 deg., 15.5-17 GHz, 50 kW peak, vernier drive | 1 |
| MDL | 62XT346-30P-7E | 135 | WR62 3-Port Crossguide Coupler, 40 dB coupling, input=choke flange/ output= cover flange/ coupled porft= choke flange, aluminum | 1 |
| MDL | 62XT46 | 75 | WR62 3-Port Crossguide Coupler, 20 dB, choke flanges | 1 |
| MDL | WR62 30 dB crossguide | 135 | WR62 4-Port Crossguide Coupler, 30 dB coupling, 2.25 inches length, aluminum | 1 |
| MDL | WR62 stepped twist | 40 | WR62 90 degree Stepped Twist Section, 1-3/4 in. length, cover/ch | 2 |
| MDL | WR62 x SMAf | 85 | WR62 (choke flange) x SMA(f) Adapter | 10 |
| MICROMEGA | 26341 | 145 | WR62 Isolator, 20 dB, 12.4-18 GHz | 1 |
| MICROMEGA | WR62 13 GHz circulator | 65 | WR62 Circulator, 15 dB isolation, 12.4-15.5 GHz, 1.37 inch length | 1 |
| MICROTECH | CG-1299/U | 75 | WR62 Jacketed Flexible Waveguide, 12 inches length, silver/brass, cover/choke flanges | 1 |
| MICROTECH | MTPS-62-501-N-36B | 165 | WR62 Flexible/ Twistable Jacketed Waveguide, 36 inches length, brass, cover/ choke flanges | 1 |
| MICROWAVE ASSOCIATES | 651 | 150 | WR62 Rotary Joint, S-shape, 15.75-16.25 GHz | 1 |
| MICROWAVE ASSOCIATES | 8K286/561 | 45 | WR62 Isolator, 20 dB, 15-16 GHz, 0.5 inch insertion length, aluminum | 2 |
| MICROWAVE ASSOCIATES | 8K604-S003 | 60 | WR62 Circulator, 18 dB isolation, 15-18 GHz, cover/choke/cover flanges, 1.5 inch length | 1 |
| MICROWAVE ASSOCIATES | 8Q229 | 175 | WR62 Isolator, 25 dB, 12.4-18.0 GHz | 1 |
| MICROWAVE ASSOCIATES | MA-52505 | 95 | WR62 x SMA(f) Adapter | 1 |
| MICROWAVE ASSOCIATES | MA-578A | 45 | WR62 Level Set Attenuator, 0-20 dB, uncalibrated drive, 2.25 inches length | 1 |
| MICROWAVE ASSOCIATES | MA-595D | 65 | WR62 Detector Miount (1N78 diode), positive polarioty, BNC(f) output, choke flange | 2 |
| MICROWAVE ASSOCIATES | MA-615A | 195 | WR62 E-H Plane Tuner, micrometer drives | 1 |
| MICROWAVE ASSOCIATES | MA-851A (neg) | 85 | WR62 Tunable Detector, negative polarity, micrometer drive, BNC(f) output | 1 |
| MICROWAVE ASSOCIATES | MA-851A (pos) | 85 | WR62 Tunable Detector, positive polarity, micrometer drive, BNC(f) output | 1 |
| MICROWAVE ASSOCIATES | MA-8K220 | 60 | WR62 Circulator, 20 dB isolation, 13.5-15.0 GHz, 1.5 inch insertion length | 1 |
| MICROWAVE ASSOCIATES | MA8-R44 | 50 | WR62 Isolator, 25 dB isolation, 13.0-13.5 GHz, 0.38 inch insertion length, aluminum | 1 |
| MICROWAVE DEVELOPMENT CORP. | 51002-40 | 195 | WR62 Directional Coupler, 40 dB coupling | 1 |
| MICROWAVE DEVELOPMENT CORP. | 51062-40 | 250 | WR62 Directional Coupler, 40 dB coupling | 1 |
| MICROWAVE ENG. | P200-10 | 175 | WR62 Directional Coupler, 10 dB coupling | 1 |
| MICROWAVE PRODUCTS | KL-2004 | 40 | WR62 Isolator, 35 dB, 13.2-13.6 GHz, 1-5/8 inches length | 1 |
| MICROWAVE RESEARCH | P130 | 40 | WR62 90 degree H-Plane Bend | 5 |
| MICROWAVE RESEARCH | P130-60 | 40 | WR62 60 degree H-Plane Bend | 4 |
| MICROWAVE RESEARCH | P40-7A | 85 | WR62 x APC7 Adapter | 1 |
| MICROWAVE RESEARCH | P40-NCM | 85 | WR62 x N(f) Adapter | 1 |
| MICROWAVE RESEARCH | P70B | 75 | WR62 Band Pass Filter,13.435-13.490 GHz, 2 dB ins.loss, 5.3 inch | 1 |
| MICROWAVE SEMICONDUCTOR | MC-7133W | 145 | WR62 Noise Source, approx. 25 dB ENR, 28 VDC | 1 |
| MIDWEST MICROWAVE | 3627 | 95 | WR62 x SMA(f) Adapter | 1 |
| MIDWEST MICROWAVE | WGA-3667-TF-W62 | 95 | WR62 x TNC(f) Adapter | 1 |
| MILITARY | AT-53?UPM | 35 | WR62 Pickup Horn, 6 dBi gain | 1 |
| MITEC EUROPE | EM2098-9 | 125 | CPR62 (PDR140) Bi-Directional Crossguide Coupler, 25 dB coupling, two SMA(f) ports on both sides of coupled arm (one must be terminated for directive coupling), 3.48 inches length, brass | 1 |
| M-WAVE DESIGN | 62A1204 | 95 | WR62 x SMA(f) Adapter | 1 |
| M-WAVE DESIGN | 62CA1225 | 95 | WR62 x SMA(f) Adapter | 2 |
| M-WAVE DESIGN | 62CA1227 | 90 | WR62 x SMA(f) Adapter | 1 |
| M-WAVE DESIGN | 62SA1219 | 95 | WR62 3.5mm(f) End Launch Adapter | 1 |
| M-WAVE DESIGN | 62SSA11(12) | 85 | WR62 Straight Section, 12 inches length, aluminum | 1 |
| N.I.S.T. | WR62 5-stub tuner | 60 | WR62 5-Stub Tuner, 2.89 inch length, stubs on H-plane wall, brass | 1 |
| N.I.S.T. | WR62 9-stub tuner | 95 | WR62 9-Stub Tuner, 3.2 inch length, 5 stubs on H-plane wall, 4 stubs on E-Plane wall | 1 |
| NARDA | 1069-06 | 225 | WR62 High Directivity Coupler, 6 dB coupling, directivity 40 dB | 1 |
| NARDA | 1069-10 | 225 | WR62 High Directivity Coupler, 10 dB coupling, directivity 40 dB | 5 |
| NARDA | 1079 | 325 | WR62 Narrow Wall Directional Coupler, 40 dB coupling, directivity 35 dB | 6 |
| NARDA | 1079-BBB | 325 | WR62 Narrow Wall Directional Coupler, 40 dB coupling, directivity 35 dB, all choke flanges | 1 |
| NARDA | 319B | 235 | WR62 High Power Load, 250 Watts average / 160 kW peak | 11 |
| NARDA | 339 | 50 | WR62 Straight Section, 6 inches length, silver/brass | 1 |
| NARDA | 349-H | 45 | WR62 90 degree H-Plane Bend | 1 |
| NARDA | 359 | 60 | WR62 90 degree Twist Section, 5 inches length | 1 |
| NARDA | 409-00 | 125 | WR62 Standard Reflection, 0.00 reflection coefficient/ 1.00 VSWR | 1 |
| NARDA | 409-05 | 125 | WR62 Standard Reflection, .05 reflection coefficient/ 1.11 VSWR | 1 |
| NARDA | 409-10 | 125 | WR62 Standard Reflection, .091 reflection coefficient/ 1.20 VSWR | 1 |
| NARDA | 409-20 | 125 | WR62 Standard Reflection, 0.20 reflection coefficient/ 1.50 VSWR | 1 |
| NARDA | 4609 | 95 | WR62 x SMA(f) Adapter | 1 |
| NARDA | 509 | 85 | WR62 Tunable Detector, positive polarity, vernier drive | 1 |
| NARDA | 719-03 | 75 | WR62 Fixed Attenuator, 3 dB, 1 Watt maximum | 1 |
| NARDA | 719-06 | 75 | WR62 Fixed Attenuator, 6 dB, 1 Watt maximum | 1 |
| NARDA | 719-10 | 75 | WR62 Fixed Attenuator, 10 dB, 1 Watt maximum | 1 |
| NARDA | 729 | 45 | WR62 Level Set Attenuator, 0-20 dB, uncalibrated drive | 2 |
| NEC | 88407A | 85 | WR62 High Pass Filter, 13.6-18.7 GHz, 8.88 inches length, silver/brass | 2 |
| OMEGA LABS | 109A | 95 | WR62 x N(f) Adapter | 1 |
| OMEGA LABS | 109-C | 95 | WR62 x N(f) Adapter | 2 |
| OMEGA LABS | 949-44 | 95 | WR62 x SMA(f) Adapter | 1 |
| OMEGA LABS | 969 | 85 | WR62 x APC7 Adapter | 1 |
| OMNI-SPECTRA | 2000-4070-00 | 95 | WR62 x SMA(f) Adapter | 1 |
| OMNI-SPECTRA | 2000-4088-00 | 95 | WR62 (choke flange) x SMA(f) Adapter | 2 |
| OMNI-SPECTRA | 2000-6255-00 | 95 | WR62 x SMA(f) Adapter | 2 |
| OMNI-SPECTRA | 2000-6265-00 | 95 | WR62 choke flange x SMA(f) Adapter | 1 |
| OMNI-SPECTRA | 20187/AJ | 95 | WR62 x SMA(f) Adapter | 3 |
| OMNI-SPECTRA | 3000-6265-00 | 85 | WR62 (choke flange) x N(f) Adapter | 1 |
| P&H LABS | C3-P15333 | 45 | WR62 Junction Isolator, 25 dB, 12.7-16.8 GHz | 1 |
| PAMTECH | PYG-2019-P | 195 | WR62 High Power Junction Isolator, 20 dB, 12.4-18 GHz, removable 75 Watt load, 1.47 inch insertion length | 3 |
| PENN ENGINEERING | 269 | 40 | WR62 45 degree H-Plane Bend | 1 |
| PENN ENGINEERING | 649 | 75 | WR62 Low Power Termination | 1 |
| PRD | 1131 | 125 | WR62 Sliding Load, uncalibrated drive | 1 |
| PRD | 131A | 75 | WR62 Low Power Termination, 1.02 VSWR, 0.5 Watt maximum | 1 |
| PRD | 158-B | 85 | WR62 Level Set Attenuator, 0-40 dB, uncalibrated drive | 1 |
| PRD | 314-A | 145 | WR62 Slide Screw Tuner, micrometer drives | 2 |
| PRD | 320-A | 95 | WR62 Sliding Short, micrometer read | 1 |
| PRD | 413 | 175 | WR62 Directional Coupler, 10 dB coupling | 1 |
| PRD | 616-A | 85 | WR62 Tunable Detector | 1 |
| QUASAR MICROWAVE | URG-107-06/1 | 145 | WR62 Flexible / Twistable Waveguide, jacketed, 25.75 inch length, choke flanges | 1 |
| RAYTHEON | 2859568-1 | 85 | WR62 x SMA(f) Adapter | 1 |
| RAYTHEON | 4820574 | 50 | WR62 Jacketed Flexible Waveguide, 6 inches length, aluminum, cover/choke flanges | 1 |
| RAYTHEON | 654451-1 | 95 | WR62 x SMA(m) Adapter | 1 |
| RAYTHEON | B2000M-HP1 | 295 | WR62 Water Load, with calorimeter interface | 1 |
| RAYTHEON | CKUM-16 | 85 | WR62 Medium Power Isolator, 17 dB isolation, 16.2-17.0 GHz, 15 Watts maximum | 1 |
| ROCKWELL | 113934 | 50 | WR62 Unjacketed Flexible Waveguide, 2.9 inches length, aluminum, choke/choke flanges | 1 |
| SCIENTIFIC ATLANTA | 12-12 | 395 | WR62 Standard Gain Horn, 24.7 dBi gain mid-band | 1 |
| SCIENTIFIC ATLANTA | 13A-12 | 65 | WR62 Tunable Single Ended Mixer, 1N78 diode, N(f) IF port | 1 |
| SECTOR MICROWAVE | SMU-4CL1-P | 225 | WR62 Manual or Motor operated DPDT Switch, 28V, choke flanges | 4 |
| SIVERS LAB | SL-7030/61B | 150 | WR62 4-Position 4-Port Switch, manually operated | 2 |
| SPERRY | 42U1 | 75 | WR62 Termination, 1 Watt | 1 |
| SPERRY | 47U2 | 85 | WR62 Level Set Attenuator, 0-40 dB, gage read | 2 |
| STRUTHERS | 106666 | 100 | WR62 Isolator, 40 dB, 14.0-16.5 GHz, 10 Watts average power, 5 inches length | 3 |
| SYSTRON DONNER | 37000-561 | 50 | WR62 Single Ended Mixer | 1 |
| SYSTRON DONNER | 7120A | 75 | WR62 Single Ended Mixer, for spectrum analyzers | 1 |
| SYSTRON DONNER | DA-159/U | 135 | WR62 High Power Load, 250 Watts average/ 160 kW peak | 1 |
| SYSTRON DONNER | DBF-056 | 25 | WR62 choke/choke flange adapter, 0.75 inch length | 1 |
| SYSTRON DONNER | DBF-059 | 85 | WR62 x APC7 Adapter | 1 |
| SYSTRON DONNER | DBF-440A-10 | 65 | WR62 Fixed Attenuator, 10 dB, 1 Watt maximum | 3 |
| SYSTRON DONNER | DBF-440A-20 | 65 | WR62 Fixed Attenuator, 20 dB, 1 Watt maximum | 2 |
| SYSTRON DONNER | DBF-631-20 | 100 | WR62 3-port Crossguide Coupler, 20 dB coupling | 1 |
| SYSTRON DONNER | DBF-642-20 | 150 | WR62 Crossguide Dual Dir. Coupler, 20 dB, N(f) coupled ports | 1 |
| SYSTRON DONNER | DBF-675-20 | 200 | WR62 Directional Coupler, 20 dB coupling | 1 |
| SYSTRON DONNER | WR62 flex 54" | 145 | WR62 Jacketed Flexible Waveguide, 4 ft. 6 in. length, brass, cover/choke flanges | 1 |
| TECHNICRAFT | C-5787-032 | 165 | WR62 Jacketed Flexible Waveguide, 6 ft. length, silver/brass, cover/choke flanges | 1 |
| TECHNICRAFT | CG-1299/U | 75 | WR62 Jacketed Flexible Waveguide, 12.25 inches length, silver/brass, cover/choke flanges | 5 |
| TECHNICRAFT | S-574-18 | 90 | WR62 Jacketed Flexible Waveguide, 18 inches length, silver/brass, cover/choke flanges | 2 |
| TECHNICRAFT | S-574-24 | 100 | WR62 Jacketed Flexible Waveguide, 24 inches length, silver/brass, cover/choke flanges | 6 |
| TECHNICRAFT | S-574-36 | 165 | WR62 Jacketed Flexible Waveguide, 36 inches length, silver/brass | 1 |
| TECHNICRAFT | TFT-57-4-B-6-N | 45 | WR62 Jacketed Flexible Section, 5.85 inch length, cover/choke flanges | 2 |
| TECHNICRAFT | TR57-1255 | 40 | WR62 45 degree E-Plane Bend, cover/choke flanges, brass | 1 |
| TECHNICRAFT | TRH-57-6-B | 40 | WR62 90 degree H-Plane Bend, choke flanges | 1 |
| TECHNICRAFT | TS-57-1 | 50 | WR62 Unjacketed Flexible Waveguide, 6.9 inches length, silver/brass | 3 |
| TECHNICRAFT | TS-57-101 | 75 | WR62 Jacketed Flexible Waveguide, 12.5 inches length, aluminum | 1 |
| TECHNICRAFT | TS-57517 | 60 | WR62 Jacketed Flexible Waveguide Section, 6.5 inches,cover/choke | 3 |
| TECHNICRAFT | TS-57536 | 60 | WR62 90 deg. H-Plane Flexible Bend, 2 inch legs, cover/choke fl. | 1 |
| TECHNICRAFT | TS-57549-1 | 65 | WR62 Jacketed Flexible Waveguide, 11 inches length, brass | 1 |
| TECHNICRAFT | TS-57-5-B-12 | 75 | WR62 Unjacketed Flexible Waveguide, 12 inches length, brass, choke/ choke flanges | 3 |
| TECHNICRAFT | WR62 flex 5.12" | 50 | WR62 Jacketed Flexible Waveguide, 5.12 inches length, silver/brass | 1 |
| TECHNICRAFT | WR62 flex 67" | 150 | WR62 Jacketed Flexible Waveguide, 5 ft. 7 in. length, aluminum | 1 |
| TECHNICRAFT | WR62 flex 7.62" | 50 | WR62 Flexible Waveguide Section, 7.62 inches length, aluminum, cover/choke flanges | 1 |
| TECHNICRAFT | WR62 flex 72" | 165 | WR62 Jacketed Flexible Waveguide, 6 ft. length, aluminum | 1 |
| TEKTRONIX | 119-0097-00 | 100 | WR62 Single Ended Broadband Mixer | 2 |
| TELEDYNE MICROWAVE | WS-01P21-1 | 150 | WR62 DPDT Relay, 115 VAC coil | 2 |
| TELEDYNE MICROWAVE | WS-02P21-2 | 135 | WR62 SPDT Relay, 115 VAC coil | 4 |
| TELERAD | TT-215-1200 | 75 | WR62 Jacketed Flexible Waveguide, 12.25 inches length, brass, cover/choke flanges | 1 |
| TERRACOM | 140-0648 | 45 | WR62 Bandpass Filter, 15.080-15.165 GHz, 4-1/2 inches length | 1 |
| TRG | 863Ku/419 | 195 | WR62 Wide Angle Scalar Feed Horn, 56/59 degrees E/H plane -3 dB beamwidth, for 0.43-0.5 f/d ratio reflectors | 1 |
| VARIAN | H62DA8 | 295 | WR62 High Power Circulator, 20 dB isolation, 12.6-15.4 GHz, 100 Watts maximum, 8.88 inches length, brass, with heatsink | 1 |
| VARIAN | VSU-9002-KR | 50 | WR62 Gunn Oscillator, 14.25 GHz, +16 dBm Po, mechanical tuning, 10V 320mA | 1 |
| VARIAN | VSU-9002-KS | 50 | WR62 Gunn Oscillator, 12.68 GHz, +14 dBm Po, mechanical tuning, 9.5V 700mA | 1 |
| VARIAN | VSX-9002-KS | 50 | WR62 Gunn Oscillator, 12.7 GHz, mechanically tunable, +14 dBm Po, 9.5V 750mA | 1 |
| VARIAN | WR62 crossguide | 95 | WR62 Dual 3-port Crossguide Coupler, 20 dB coupling forward & reverse, 2.5 inches length, brass, SMA(f) coupling ports | 1 |
| WAVEGUIDE ENG. | 062-2058-2 | 85 | WR62 (choke flange) x SMA(f) Adapter | 2 |
| WAVELINE | 216286 | 85 | WR62 Jacketed Flexible Waveguide, 12 inches length, silver/brass | 1 |
| WAVELINE | 70067-P2 | 75 | WR62 Short Body Dir.Cplr., 10 dB, 13-16 GHz, 6 in., >20 dB directivity | 5 |
| WAVELINE | 70085 | 250 | WR62 Panel Mounting Direct Reading Precision Attenuator, 0-67 dB, choke flanges | 6 |
| WAVELINE | 701-TNCF | 95 | WR62 x TNC(f) Adapter | 2 |
| WAVELINE | 701-TNCM | 95 | WR62 x TNC(m) Adapter | 1 |
| WAVELINE | 70404 | 35 | WR62 choke flange to choke flange Adapter, 1/2 inch length *new old stock* | 16 |
| WAVELINE | 70598 | 275 | WR62 Directional Coupler, 30 dB coupling | 2 |
| WAVELINE | 706-20 | 75 | WR62 Fixed Attenuator, 20 dB, 1 Watt maximum | 2 |
| WAVELINE | 706-40 | 75 | WR62 Fixed Attenuator, 40 dB, 1 Watt maximum | 1 |
| WAVELINE | 707-10 | 65 | WR62 Fixed Attenuator, 10 dB | 1 |
| WAVELINE | 710 | 95 | WR62 Level Set Attenuator, 0.5-40 dB, uncalibrated drive | 1 |
| WAVELINE | 71185 | 265 | WR62 Dual Dir.Cplr.,10 dB coupling, input and both coupled ports are N female, output (test) port is WR62 | 1 |
| WAVELINE | 71228 | 150 | WR62 3-port Crossguide Coupler, 40 dB coupling, cover/choke/choke flanges, brass, 2.5 inches inserion length | 1 |
| WAVELINE | 71229 | 195 | WR62 Double Pass Circulator, 30 dB isolation, 16.2-16.6 GHz, choke flanges on all four ports, hetsink for 100 Watts handling, 8.3 inches length | 1 |
| WAVELINE | 71230 | 65 | WR62 Pressurization Section, 3.5 inches length, 3/8 NPT inlet and 3/8 NPT 0-30I guage, brass, choke flanges | 1 |
| WAVELINE | 71231 | 95 | WR62 x SMA(f) Adapter | 2 |
| WAVELINE | 71270 | 295 | WR62 Directional Coupler, 40 dB coupling, choke flanges | 1 |
| WAVELINE | 713 | 45 | WR62 Level Set Attenuator, 0-20 dB, uncalibrated drive | 3 |
| WAVELINE | 714 | 85 | WR62 Tunable Diode Mount, for 1N78 diode cartridge | 2 |
| WAVELINE | 715 | 75 | WR62 Tunable Detector Mount, two lockable tuning screws & sliding backshort, BNC(f) output | 1 |
| WAVELINE | 717 | 60 | WR62 Detector Mount, negative polarity, 1N78 crystal | 2 |
| WAVELINE | 722-R | 245 | WR62 Precision Direct Reading Attenuator, 0-60 dB, front panel drilled and arms oriented for panel mounting | 1 |
| WAVELINE | 732 | 40 | WR62 90 degree E-Plane Bend, cover/ choke flanges, brass | 15 |
| WAVELINE | 732-1 | 40 | WR62 90 degree E-Plane Bend, choke flanges | 3 |
| WAVELINE | 733 | 40 | WR62 90 degree H-Plane Bend, cover/ choke flanges, brass | 9 |
| WAVELINE | 733-1 | 40 | WR62 90 degree H-Plane Bend, choke flanges, brass | 2 |
| WAVELINE | 733-2 | 40 | WR62 90 degree H-Plane Bend, cover flanges, brass | 9 |
| WAVELINE | 741-03 | 40 | WR62 Straight Section, 3 inches length, cover/choke flanges, brass | 1 |
| WAVELINE | 741-2-03 | 40 | WR62 Straight Section, 3 inches length, aluminum | 4 |
| WAVELINE | 743-1-12 | 85 | WR62 Straight Section, 12 inches length, brass, choke flanges | 1 |
| WAVELINE | 743-12 | 85 | WR62 Straight Section, 12 inches length, aluminum, cover/choke flanges | 6 |
| WAVELINE | 744-24 | 125 | WR62 Straight Section, 24 inches length, aluminum, cover/choke flanges | 3 |
| WAVELINE | 750-12 | 85 | WR62 Jacketed Flexible Section, 12 inches length, brass, cover/choke flanges | 8 |
| WAVELINE | 753 | 95 | WR62 Sliding Load, uncalibrated drive | 1 |
| WAVELINE | 754 | 95 | WR62 Low Power Termination, 1 Watt, 1.02 vswr | 4 |
| WAVELINE | 768 | 60 | WR62 Bulkhead Feedthrough, 3.5 inch length, on 3.5 inch diameter 6-hole mount | 2 |
| WAVELINE | 770-20 | 125 | WR62 3-port Crossguide Coupler, 20 dB coupling | 6 |
| WAVELINE | 772-30 | 285 | WR62 Narrow Wall Directional Coupler, 30 dB coupling | 2 |
| WAVELINE | 773-10 | 250 | WR62 Ultra-Flat Directional Coupler, 10 dB coupling | 1 |
| WAVELINE | 774-03 | 225 | WR62 Directional Coupler, 3 dB coupling | 3 |
| WAVELINE | 774-06 | 225 | WR62 Directional Coupler, 6 dB coupling | 1 |
| WAVELINE | 774-10 | 225 | WR62 Directional Coupler, 10 dB coupling | 5 |
| WAVELINE | 774-20 | 225 | WR62 Directional Coupler, 20 dB coupling | 1 |
| WAVELINE | 774-30 | 295 | WR62 Directional Coupler, 30 dB coupling | 1 |
| WAVELINE | 774-40 | 295 | WR62 Directional Coupler, 40 dB coupling | 1 |
| WAVELINE | 778-H | 150 | WR62 4-Port Manual Transfer Switch, H-Plane switching | 4 |
| WAVELINE | 780 | 85 | WR62 Shorting Switch (SPST) | 1 |
| WAVELINE | 781 | 150 | WR62 Medium Power Load, 100 Watts average/ 160 kW peak | 3 |
| WAVELINE | 782 | 225 | WR62 Load, 250 Watts average / 160 kW peak | 2 |
| WAVELINE | 783 | 95 | WR62 Slide Screw Tuner, uncalibrated drives | 1 |
| WAVELINE | 787 | 395 | WR62 High Power Load, 350 watts average power | 1 |
| WAVELINE | 790 | 60 | WR62 90 degree Twist Section, cover/choke flanges, 6 inches length | 3 |
| WAVELINE | 791 | 60 | WR62 45 degree Twist Section, cover/choke flanges, 6 inches length | 2 |
| | | | WR75 Waveguide: 10.0-15.0 GHz | |
| 3 dBm, INC. | M-111 | 150 | WR75 Isolator, 25 Db, 10.0-14.5 GHz | 1 |
| AIRTRON | WR75 flex 6" | 50 | WR75 Jacketed Flexible Waveguide, 6.15 inches length, brass, cover/choke flanges | 1 |
| AML | 3844117 | 20 | WR75 Tuned Load, 12.6-13.0 GHz, 5 Watts, VSWR <1.2, 0.8" length | 50 |
| ANDREW | 55675-75 | 40 | WR75 Pressurization Section,5/8" thick, 3/8" inlet, cover/choke | 1 |
| ANDREW | A075HMG | 85 | CPR75G (PDR120) to UG flange (MIL-F-3922/70-016) Flange Adapter, brass, 4 inches length *new old stock* | 1 |
| ANDREW | C075YNSG | 95 | WR75 (choke flange) x N(f) Adapter | 1 |
| ANDREW | WFT-75-36 | 165 | WR75 Twistable/ Flexible Jacketed Waveguide, 36 inches length, brass, cover/choke flanges | 1 |
| APOLLO MICROWAVES | 10077-4 | 150 | WR75 Band Pass Filter, 10.1-15.0 GHz, 2.25 inches length, cover/choke flanges | 2 |
| APOLLO MICROWAVES | 12087 | 40 | WR75 180 degree E-Plane Bend, 2.62 inches center to center | 1 |
| APOLLO MICROWAVES | 13849-1 | 115 | WR75 Circulator, 17 dB isolation, 13.2-14.2 GHz, 30 Watts power handling, 1.87 inch length | 1 |
| APOLLO MICROWAVES | 14049-4 | 195 | WR75 3-Port Crossguide Coupler, 50 dB coupling, N(f) coupled port on both sides of single coupled arm, supplied with Narda 370BNM 5 Watt termination | 1 |
| APOLLO MICROWAVES | 14342 | 100 | WR75 Band Pass Filter, 10-13 GHz, 2.47 inches length | 1 |
| APOLLO MICROWAVES | 14736-1 | 165 | WR75 Dual Directional Crossguide Coupler, 40 dB coupling, SMA(f) coupled ports, coupling arms internaaly terminated, 4 inches length, brass, choke flanges | 3 |
| APOLLO MICROWAVES | 75328-165 | 75 | WR75 x WR62 Taper Section, 5.87 inches length, brass | 1 |
| APOLLO MICROWAVES | 75597-81 | 45 | WR75 Assymetrical 90 degree H-Plane Bend, 1.1 inch x 2.05 inch legs, brass, cover/choke flanges | 1 |
| APOLLO MICROWAVES | WR75 45 de. Twist | 45 | WR75 45 degree Twist Section, 3.75 inches length, brass | 1 |
| APOLLO MICROWAVES | WR75 ASSYM H BEND | 40 | WR75 Assymetrical 90 degree H-Plane Bend, 1.12 inch leg length (choke flange) x 2.05 inch leg length (cover flange), brass | 1 |
| APOLLO MICROWAVES | WR75 Circulator | 115 | WR75 Circulator, 20 dB isolation, 11.2-15.0 GHz, 1.88 inch insertion length | 1 |
| APOLLO MICROWAVES | WR75 hi power load | 275 | WR75 (choke flange) High Power Load, 500 Watts average, brass, 12 inches length | 3 |
| APOLLO MICROWAVES | WR75 LPFL | 100 | WR75 Low Pass Filter, 10.3-15.0 GHz passband, -30 dB at 16.2 GHz, 2.25 inches length, cover/choke flanges | 1 |
| ARRA | 75-227-3 | 35 | WR75 Unjacketed Flexible Waveguide Section, 3 inches length | 1 |
| ARRA | 75-460 | 95 | WR75 x N(f) Adapter | 1 |
| ARRA | 75-463 | 95 | WR75 x APC7 Adapter, aluminum body | 4 |
| ARRA | 75-463B | 95 | WR75 x APC7 Adapter, brass body | 1 |
| ARRA | 75-480-03 | 85 | WR75 3 dB Fixed Attenuator, 1 Watt maximum | 4 |
| ARRA | 75-480-06 | 85 | WR75 6 dB Fixed Attenuator, 1 Watt maximum | 3 |
| ARRA | 75-480-20 | 85 | WR75 20 dB Fixed Attenuator, 1 Watt maximum | 2 |
| ARRA | 75-602-A-1-2-30FSF | 135 | WR75 3-port Crossguide Coupler, 30 dB, SMA(f) coupled port, aluminum, cover/choke flanges | 1 |
| ATLANTIC MICROWAVE | 206-HPT | 325 | WR75 High Power Load, 500 Watts average power, 10 inch length x 5x5 inch heatsink fins, aluminum | 2 |
| ATLANTIC MICROWAVE | 206-MPT | 195 | WR75 Medium Power Termination, 150 Watts average power | 1 |
| ATLANTIC MICROWAVE | 27C1938 | 325 | WR75 High Power Load, 500 Watts average power | 1 |
| ATLANTIC MICROWAVE | AMC-0544 | 75 | WR75 Fixed Attenuator, adjustable for 1-25 dB values, setscrew locks at chosen value, 3 inches length, aluminum | 4 |
| ATLANTIC MICROWAVE | CW7500 | 95 | WR75 x SMA(f) Adapter | 1 |
| ATM | 75-203A-8 | 135 | WR75 (choke flange) x N(f) End Launch Adapter, aluminum body, 450 Watts CW/ 11 kW peak *new old stock* | 5 |
| ATM | 75-253B-6 | 95 | WR75 x N(f) Adapter, brass body, 150 Watts CW/ 3 kW peak, 1.25 VSWR | 1 |
| BOGART | 882352-1 | 90 | WR75 (cover flange) x WR90 (coke flange) Taper, 3.5 inches length, aluminum | 1 |
| CALIFORNIA MICROWAVE | TR117 | 95 | WR75 x SMA(f) Adapter | 3 |
| CASWELL ELEC. | KE-101-D | 75 | WR75 Isolator, 20 dB, 11-13 GHz, 3.25 inches length | 2 |
| CMT | RA75-N-F-4AA | 95 | WR75 (choke flange) x N(f) Adapter | 4 |
| CMT | RA75-SMA-F-13A-AA | 100 | CPR75 (PDR120) x SMA(f) Adapter | 1 |
| CMT | RHB75 | 50 | WR75 90 degree H-Plane Bend | 1 |
| CMT | RPS75-2SMAF40 | 95 | WR75 Power Sampler, 40 dB coupling/SMA(f), 0.75 in. length *new old stock* | 5 |
| CMT | RPS75-60 | 95 | WR75 Power Sampler, 60 dB coupling, SMA(f) coupled port, 0.75 inch length | 1 |
| COM DEV | 11445 | 85 | WR75 Band Pass Filter, 13.84-14.59 GHz, 6 inches length, brass | 1 |
| DEMORNAY BONARDI | DBFA-057 | 95 | WR75 x N(f) Adapter, brass | 1 |
| DEMORNAY BONARDI | DBFA-057-SA | 95 | WR75 (choke flange) x N(f) Adapter, aluminum | 1 |
| DIAMOND ANTENNA | 53-845-0 | 225 | WR75 Rotary Joint, L-shape, 2.12 x 3.00 inch legs, 10-15 GHz, aluminum, cover/choke flanges | 1 |
| DORADO INTL. | 4IWY13-2 | 110 | WR75 Full Band Junction Isolator, 10-15 GHz, 18 dB isolation, 0.5 dB insertion loss, 1.35 VSWR, 1.49 inch insertion length *new old stock8 | 3 |
| E&M LABS | M110LI | 195 | WR75 Isolator, 25 dB, 10-15 GHz | 4 |
| EMC INSTRUMENTATION | 1050 | 65 | WR75 Pickup Horn, 10 dBi gain | 1 |
| FARINON | SD-81506-010 | 75 | WR75 Circulator, 20 dB isolation, 10.7-13.25 GHz, 1.75 inch length | 2 |
| FARINON' | SD-80867 | 45 | WR75 Short Body Termination, 0.5 inch length, 1 Watt, 1.35 VSWR | 2 |
| FERROCOM | 1125-SMI | 50 | WR75 Iso-Adapter, 30 dB isolation, 10.7-11.7 GHz, SMA(m) input/ WR75 output | 1 |
| FERROCOM | 277-0299-010 | 75 | WR75 Circulator, 30 dB isolation, 10.7-11.7 GHz, 1.75 inch length | 3 |
| FERROCOM | 277-0299-050 | 75 | WR75 Circulator, 30 dB isolation, 12.70-13.25 GHz, 1.75 inch length | 1 |
| FERROCOM | R75-01 | 50 | WR75 Isolator, 18 dB, 10.7-11.7 GHz, 2.75 inches length | 1 |
| FLANN MICROWAVE | 17093-SF50 | 95 | CPR75 (UDR120) x SMA(f) Adapter | 1 |
| FLANN MICROWAVE | 17110 | 795 | WR75 Precision Direct Reading Attenuator, 0-60 dB | 1 |
| FLANN MICROWAVE | 17131-10 | 395 | WR75 Directional Coupler, 10 dB coupling, directivity 40 dB | 4 |
| FLANN MICROWAVE | 17270-20 | 185 | CPR75 (UDR120) 3-port Crossguide Coupler, 20 dB coupling, 2.8 inches length | 1 |
| GENERIC | 11.4-12.7G BPFL | 50 | WR75 Band Pass Filter, 11.4-12.7 GHz, 5.25 inches length | 1 |
| GENERIC | CPR75 LOAD | 35 | CPR75 (UDR120) 5 Watt Load | 2 |
| GENERIC | WR75 12 GHz BPFL | 75 | WR75 Band Pass Filter, 11.35-12.45 GHz, 5 inches length, silver/brass, choke flanges | 1 |
| GENERIC | WR75 13GHz LPFL | 65 | WR75 Low Pass Filter, 13.3 GHz, 5 inches length | 1 |
| GENERIC | WR75 14.5G BP | 60 | WR75 Bandpass Filter, 14.275-14.925 GHz, 5.5 in. length | 1 |
| GENERIC | WR75 17.25" | 75 | WR75 Straight Sectiion, 17.25 inches length, brass | 7 |
| GENERIC | WR75 180 H | 40 | WR75 180 degree H-Plane Bend, 4.12 inches center to center | 1 |
| GENERIC | WR75 2.38" flex | 40 | WR75 Unjacketed Flexible Section, 2.38 inch length, silver/brass, cover/choke flanges | 1 |
| GENERIC | WR75 3.82" | 30 | WR75 Straight Section, 3.82 inches length, brass, cover/choke flanges | 1 |
| GENERIC | WR75 34.5" | 85 | WR75 Straight Section, 34-1/2 inches length, aluminum, choke fl. | 1 |
| GENERIC | WR75 36.75" | 95 | WR75 Straight Section, 36.75 inches length, brass | 1 |
| GENERIC | WR75 4.62" FLEX | 35 | WR75 Unjacketed Flexible Waveguide Section, 4-5/8 inches length | 1 |
| GENERIC | WR75 5.13" | 45 | WR75 Straight Section, 5.13 inches length, brass | 1 |
| GENERIC | WR75 90 H | 40 | WR75 90 degree H-Plane Bend | 6 |
| GENERIC | WR75 90 H MITRE | 45 | WR75 Asymertrical 90 degree H-Plane Mitre Bend, 1.5"x2.25" legs, brass, choke flanges | 2 |
| GENERIC | WR75 asym E 90 | 45 | WR75 Asymetrical 90 degree E-Plane Mitre Bend, 1.5"x4.4" legs, brass, choke flanges | 1 |
| GENERIC | WR75 bulkhead | 25 | WR75 Bulkhead Plate, 2.50 x 1.56 inch plate 0.5 inch thick, four hole mount, silver/brass | 2 |
| GENERIC | WR75 faraday isolator | 125 | WR75 Isolator, 30 dB isolation, 10-14 GHz, 5 inches length | 14 |
| GENERIC | WR75 flange adapter' | 90 | WR75 cover flange to CPRG75 grooved flange Adapter, 4 inches length, brass | 1 |
| GENERIC | WR75 flex 12" | 85 | WR75 Jacketed Flexible Waveguide, 12 inches length, brass, cover/choke flanges | 1 |
| GENERIC | WR75 flex 24.25" | 100 | WR75 Jacketed Flexible Waveguide, 24.25 inches length, aluminum, cover/choke flanges | 1 |
| GENERIC | WR75 H TEE | 50 | WR75 H-Plane (Shunt) Tee | 2 |
| GENERIC | WR75 Press.Section | 50 | WR75 Pressurization Section,1/4"NPT inlet,1/2" thick,cover/choke | 1 |
| HARRIS | 101-081506-010 | 75 | WR75 Circulator, 20 dB isolation, 10.7-12.7 GHz, 1.75 inch length | 2 |
| HARRIS | 3084355 | 135 | WR75 Band Pass Filter, 10.25-15.0 GHz, -30 dB at 9.5 & 16.4 GHz; -60 dB at 8.6 & 17.6 GHz | 7 |
| HARRIS | SD-60452-1 | 95 | WR75 x SMA(f) Adapter | 1 |
| HARRIS | SD-60477 | 95 | WR75 Bandpass Filter, 11.45-11.49 GHz, with 20/40/60 dB step att | 1 |
| HARRIS FARINON | W117122T | 95 | WR75 Junction Isolator, 35 dB, 11.7-12.2 GHz | 10 |
| HP/KEYSIGHT | M362A | 275 | WR75 Low Pass Fil;ter, 19 GHz (-30 dB) cutoff | 3 |
| HP/KEYSIGHT | M382A | 500 | WR75 Precision Direct Reading Attenuator, 0-50 dB | 2 |
| HP/KEYSIGHT | M421A | 90 | WR75 Crystal Detector, negative polarity | 1 |
| HP/KEYSIGHT | M424A | 125 | WR75 Crystal Detector, negative polarity | 7 |
| HP/KEYSIGHT | M532A | 175 | WR75 Direct Reading Frequency Meter | 3 |
| HP/KEYSIGHT | M870A | 195 | WR75 Slide Screw Tuner, vernier read | 2 |
| HP/KEYSIGHT | M914A | 200 | WR75 Moving Load, 1 Watt, SWR=1.01 | 1 |
| HP/KEYSIGHT | MP292A | 125 | WR75 x WR62 Waveguide Taper | 4 |
| HP/KEYSIGHT | MP292B | 125 | WR75 x WR62 Waveguide Taper | 20 |
| HP/KEYSIGHT | MX292A | 115 | WR90 x WR75 Waveguide Taper | 2 |
| HP/KEYSIGHT | MX292B | 125 | WR90 x WR75 Waveguide Taper | 10 |
| HUBER + SUHNER | 3103 | 95 | WR75 x N(f) Adapter | 1 |
| HUGHES | 100-008-04 | 65 | WR75 Circulator, 16 dB isolation, 11-14 GHz | 89 |
| HUGHES | 100-576 | 65 | WR75 Detector, positive polarity (1N78B), BNC(f) output | 5 |
| HUGHES | 2099385 | 75 | WR75 29 dB Fixed Attenuator | 1 |
| KW MICROWAVE | 58-S04 | 25 | WR75 Pressurization Section, 0.6 inch thick, cover/choke flanges | 3 |
| LITTON | 124104-2 | 125 | WR75 Unjacketed Flexible Waveguide, 24 inches length, silver/brass | 1 |
| LOGUS MICROWAVE | LM75BOLXX161 | 200 | WR75 DPDT Transfer Switch, manual or 22-32 VDC operation | 1 |
| LOGUS MICROWAVE | LM75BPLXX76 | 200 | WR75/CPR75 DPDT Transfer Switch, manual or 24VDC operation | 7 |
| LOGUS MICROWAVE | LM75BXLXX128 | 200 | WR75 DPDT Transfer Switch, manual or 22-32 VDC operation | 2 |
| LOGUS MICROWAVE | LO75BUL7X51 | 200 | WR75 DPDT Transfer Switch, manual or 24VDC operation | 1 |
| LORAL | 23649G1 | 95 | CPR75 (UDR120) x N(f) Adapter | 1 |
| M/A-COM | 7000-6257-00 | 95 | WR75 x APC7 Adapter | 2 |
| M/A-COM ASSOC. | WR75 8 dB att. | 75 | WR75 8 dB Fixed Attenuator | 1 |
| MAURY MICROWAVE | M103A5 | 60 | WR75 Standard Section, 5 inches length | 1 |
| MAURY MICROWAVE | M200A2 | 195 | WR75 x 3.5mm(f) Adapter, 1.05 VSWR | 1 |
| MAURY MICROWAVE | M210D2 | 195 | WR75 x SMA(f) Adapter, 1.05 VSWR | 2 |
| MAURY MICROWAVE | M211D1 | 145 | WR75 x SMA(m) Adapter, 1.10 VSWR | 2 |
| MAURY MICROWAVE | M213D2 | 195 | WR75 x N(f) Adapter, 1.05 VSWR | 1 |
| MAURY MICROWAVE | M229A6 | 135 | WR75 x APC7 End Launch Adapter, 1.15 VSWR | 1 |
| MAURY MICROWAVE | M229D | 135 | WR75 x APC7 End Launch Adapter, 1.25 VSWR | 1 |
| MAURY MICROWAVE | M230A1 | 235 | WR75 x 3.5mm(f) End Launch Adapter, 1.10 VSWR | 1 |
| MAURY MICROWAVE | M230K1 | 225 | WR75 x 3.5mm male NMD End Launch Adapter | 1 |
| MAURY MICROWAVE | M314 | 195 | WR75 Sliding Termination, 1 Watt maximum, 1.01 VSWR | 1 |
| MAURY MICROWAVE | M750A | 235 | WR75 Isolator, 30 dB isolation, 10-15 GHz | 1 |
| MDL | 75AC46-1E | 95 | WR75 x N(f) Adapter | 4 |
| MICROTECH | 109011-1 | 90 | WR75 (choke flange) Low Power Termination, 2 Watts average | 3 |
| MICROTECH | 219851 | 65 | WR75 Crystal Mount (1N23) Detector, positive polarity, BNC(f) output | 1 |
| MICROTECH | MTPS75-502-N-24B | 135 | WR75 Jacketed Flexible Waveguide, 24 inches length, brass, choke/choke flanges | 1 |
| MICROTECH | MTPS-75-UUN-24B | 165 | WR75 Flexible/ Twistable Jacketed Waveguide, 24 inches length, brass *new old stock* | 6 |
| MICROWAVE ASSOCIATES | 50425B | 65 | WR75 20 dB Fixed Attenuator, 10-12.5 GHz | 1 |
| MICROWAVE ASSOCIATES | 94733 | 65 | WR75 60 dB Fixed Attenuator, 12-14.5 GHz | 1 |
| MICROWAVE ASSOCIATES | J6153 | 75 | WR75 Circulator, 20 dB isolation, 10-13 GHz | 13 |
| MICROWAVE ASSOCIATES | MA-638 | 85 | WR62 Hybrid Tee, silver/brass, 2.62 inches length | 4 |
| MICROWAVE DEVELOPMENT CO. | 63075-N | 95 | WR75 x N(f) Adapter | 1 |
| MICROWAVE ENGINEERING | M40-689 | 95 | WR75 x N(f) Adapter | 1 |
| MICROWAVE RESEARCH | M160-40 | 295 | WR75 Directional Coupler, 40 dB coupling | 1 |
| MICROWAVE RESEARCH | M240-417 | 85 | Half Height WR75 x 7mm Adapter,1.17x1.00" flange,0.87x0.75"holes | 5 |
| MICROWAVE RESEARCH | M30-P | 75 | WR75 x WR62 Taper Section, 2.98 inches length, aluminum | 1 |
| MICROWAVE RESEARCH | M40-7A | 95 | WR75 x APC7 Adapter | 2 |
| MID-CENTURY MICROWAVE | 17/ 14 | 175 | WR75 4-Port Directional Coupler,30dB, needs external termination, brass | 1 |
| MID-CENTURY MICROWAVE | 17/16A | 175 | WR75 3-Port Crossguide Coupler, 30 dB coupling, 3 inches length, brass | 1 |
| MITEC | B204399 | 75 | WR75 Band Pass Filter, 13.65-14.65 GHz, 4.62 inches length, brass, choke flanges' | 1 |
| MITEC | M0926-8 | 95 | WR75 x N(f) Adapter | 4 |
| MITEC | M1045 | 75 | WR75 (choke flange) Short Body Low Power Termination, 5 Watts, 1.10 VSWR, with thermistor attached | 1 |
| MITEC | M1203-1 | 185 | WR75 3-port Crossguide Coupler, 53 dB coupling, SMA(f) coupled port, 1.8 inch insertion length, brass | 1 |
| MITEC | M-1650-8 | 60 | WR75 Jacketed Flexible Waveguide, 5.88 inches length, brass | 2 |
| MITEC | MO907-8 | 165 | CPR75 (UDR120) 3-port Crossguide Coupler, 20 dB coupling, N(f) coupled port, 3.75 inches length, brass | 1 |
| MITEC | WG17-95mm | 35 | CPR75 (UDR120) Straight Section, 3.75 inches length, brass | 1 |
| MITEC | WR75 13.9-14.7 GHz BPFL | 75 | WR75 Band Pass Filter, 13.0-14.7 GHz, 5.25 inches length, brass, choke flanges | 1 |
| MITEC | WR75 14 GHz circulator | 85 | WR75 Circulator, 25 dB isolation, 13.6-15.0 GHz, 1.6 inch insertion length, aluminum | 1 |
| MITEC | WR75 14.8 GHz LPFL | 75 | WR75 14.8 GHz Low Pass Filter, -20 dB at 15.6 GHz, 2.23 inch length, aluminum | 1 |
| MITEC | WR75 15.0 GHz LPFL | 75 | WR75 15.0 GHz Low Pass Filter, -20 dB at 16.7 GHz, 2.23 inch length, aluminum | 1 |
| MITEC | WR75 3 arm crossguide | 195 | WR75 Dual Directional Crossguide Coupler, three internally terminted coupling arms with SMA(f) coupled ports, 47 dB and 57 dB coupling arms forward, 47 dB coupling arm reverse, 6.5 inches length, cover/choke flanges, silver over brass | 1 |
| MITEC | WR75 50W load | 115 | WR75 Medium Power Load, 50 Watts maximum, 2 inches length, brass | 1 |
| MITEC | WR75 single arm crossguide | 165 | WR75 3-port Crossguide Coupler, 41 dB coupling, SMA(f) coupled port, 3.5 inches length, choke flanges, silver over brass | 1 |
| MOTOROLA | 100-006-04 | 75 | WR75 Circulator, 23 dB isolation, 11.6-13.4 GHz, 2 inches length, silver/brass | 76 |
| M-WAVE DESIGN | 75IR | 165 | WR75 Isolator, 25 dB, 10.0-14.5 GHz | 1 |
| NARDA | 75-601 | 95 | WR75 x N(f) Adapter | 1 |
| NEICO MICROWAVE | 16712 | 200 | CPR75 (PDR120) DPDT Transfer Switch, manual or 24VDC operation | 2 |
| NEICO MICROWAVE | 16766-1 | 35 | CPR75 (UDR120) 90 degree E-Plane Mitre Bend, 6" x 1-3/4" legs | 14 |
| NEICO MICROWAVE | 16802-1 | 35 | CPR75 (UDR120) 90 degree E-Plane Mitre Bend, 4-1/2" x 1" legs | 9 |
| NEICO MICROWAVE | 16811-1 | 35 | CPR75 (PDR120) Straight Section, 3-1/2 inches length, grooved flanges | 1 |
| NEICO MICROWAVE | 30501-G1 | 125 | CPR75 (UDR120) Short Body Dir. Coupler, 10 dB coupling, 3" long,11-15 GHz | 2 |
| OMEGA LABS | 3145A | 75 | WR75 3 dB Fixed Attenuator | 2 |
| OMEGA LABS | 3145B | 75 | WR75 6 dB Fixed Attenuator | 1 |
| OMEGA LABS | 3145G | 75 | WR75 40 dB Fixed Attenuator, 40 dB +/-4 dB 13-15 GHz | 2 |
| OMEGA LABS | 3285X18 | 95 | WR75 Low Power termination, with two crossguide coupled -32 dB ports (one SMAf and one Nm), 5.62 inches length, aluminum | 1 |
| OMEGA LABS | 3643 | 115 | WR75 Low Power Termination, 2 Watts, 1.02 VSWR | 1 |
| OMEGA LABS | 3905X4 | 95 | WR75 x N(m) Adapter | 1 |
| OMEGA LABS | WR75 sliding term. | 145 | WR75 Sliding Termination, 1 Watt maximum, 1.01 VSWR | 1 |
| P&H LABS | C3-X14333 | 65 | WR75 Isolator, 20 dB, 10.0-12.2 GHz, 2 inches length | 1 |
| PAMTECH | RHG2011 | 85 | WR75 Isolator, 25 dB, 10.8-12.3 GHz | 1 |
| PASTERNACK | PE9817 | 95 | WR75 x N(f) Adapter | 2 |
| PASTERNACK | PE9817 | 95 | WR75 x N(f) Adapter | 1 |
| PENN ENGINEERING | 3105M1 | 90 | WR75 x N(f) Adapter | 2 |
| PRODELIN | WR62 x WR75 | 75 | WR62 (choke flange) x WR75 Taper Section, 3 inches length | 1 |
| QUASAR MICROWAVE | WR75 flex-twist 1m | 185 | WR75 Flexible / Twistable Waveguide, jacketed, 39.6 inch length, choke flanges | 2 |
| RACAL | 220-374-1 | 85 | WR75/CPR75 x WR62 (choke flange) Taper Section, 1.5 in.length | 4 |
| ROCKWELL | 124104-3 | 50 | WR75 Unjacketed Flexible Waveguide, 6 inches length, brass | 1 |
| SECTOR MICROWAVE | SM75-4GL5 | 225 | WR75 Manual or Motor operated DPDT Switch, 235VAC | 1 |
| SECTOR MICROWAVE | SM75-4PL3 | 225 | WR75 Manual or Motor operated DPDT Switch, 117VAC | 3 |
| SECTOR MICROWAVE | SM75-714 | 225 | WR75 Manual or Motor operated DPDT Switch, 28 VDC | 1 |
| SECTOR MICROWAVE | SM75D-1121-3 | 225 | WR75 Manual or Motor operated DPDT Switch, with parallel DC-4 GHz coaxial switching -SMAf; 24VDC | 2 |
| SPECIALTY MICROWAVE | 114281 | 65 | WR75 90 degree Twist Section, 3 inches length, cover/choke flanges | 1 |
| SPECIALTY MICROWAVE | DCXS75-40-2 | 150 | WR75 3-port Crossguide Coupler, 40 dB coupling, SMA(f) coupled port, choke/cover flanges, brass | 1 |
| SPECIALTY MICROWAVE | WR75 H bend | 40 | WR75 90 degree H-Plane Bend, brass, 1.5 inch bend radius | 19 |
| STRUTHERS | H120XG-3 | 85 | WR75 3 dB Fixed Attenuator, 1 Watt maximum | 1 |
| STRUTHERS | H123XG-40 | 145 | WR75 Variable Attenuator, 0-40 dB | 1 |
| SYSTRON DONNER | DBFA-210-8.03 | 45 | WR75 Straight Section, 8.03 inches length | 1 |
| SYSTRON DONNER | DBFA-275 | 45 | WR75 Feedthru Bulkhead, 3.75 inch length, 3.5 inch diameter 6-hole flange, cover/choke flanges, brass | 1 |
| SYSTRON DONNER | DBFA-440A-50 | 85 | WR75 50 dB Fixed Attenuator | 1 |
| SYSTRON DONNER | DBFA-480A | 175 | WR75 Isolator, 20 dB, 10-15 GHz | 1 |
| SYSTRON DONNER | DBFA-675-03 | 295 | WR75 Directional Coupler, 3 dB coupling | 1 |
| SYSTRON DONNER | DBFA-675-10 | 295 | WR75 Directional Coupler, 10 dB coupling | 1 |
| TDK | 9317.2 | 85 | WR75 Isolator, 20 dB, 10.4-12.7 GHz, 1 inch length | 1 |
| TDK | WR75 isolator | 65 | WR75 Isolator, 25 dB, 10.7-12.7 GHz, 0.87 inch length | 1 |
| TECHNICRAFT | TFT-60011 | 95 | WR75 Jacketed Flexible Waveguide Section, 21 inches length, aluminum | 5 |
| TECHNICRAFT | TL-60005 | 195 | WR75 Jacketed Flexible Waveguide, 10 ft. length, silver/brass | 1 |
| TECHNICRAFT | TR-60501 | 100 | WR75 3-port Crossguide Coupler, 30 dB coupling, 10-13 GHz, directivity >23 dB, brass, 1.74 inches insertion length | 1 |
| TECHNICRAFT | TR-605062-7 | 30 | WR75 Straight Section, 1-1/2 inches length | 10 |
| TECHNICRAFT | TR-605063-12 | 45 | WR75 Straight Section, 8-1/4 inches length | 4 |
| TECHNICRAFT | TR-605079 | 35 | WR75 Termination, 5 Watts, VSWR <1.5 | 13 |
| TECHNICRAFT | TS-60-2B-24N | 235 | WR75 Jacketed Flexible Waveguide, 6 ft. length, silver/brass | 1 |
| TECHNICRAFT | TS-60-4-B-18 | 85 | WR75 Jacketed Flexible Waveguide, 18 inches length, silver/brass, cover/choke flanges | 1 |
| UNIQUE BROADBAND SYSTEMS | 121-75-N-F-C-T21 | 95 | WR75 x N(f) Adapter | 2 |
| UTE MICROWAVE | CWT-5693-OT | 75 | WR75 Iso-Adapter, 10-213 GHz, 30 dB isolation, WR75 input/ SMA(f) output | 1 |
| UTE MICROWAVE | CWT-6515-WT | 195 | WR75 High Power Isolator, 20 dB, 11.5-15.0 GHz, 100 Watts max. | 1 |
| WAVEGUIDE ENGINEERING | 075-2234 | 60 | WR75 90 degree H-Plane Bend | 3 |
| WAVELINE | 70014 | 75 | WR75 (cover flange) x WR62 (choke flange) Taper Section, 3 inches length, brass | 1 |
| WAVELINE | 7501-APC7 | 90 | WR75 x APC7 Adapter | 2 |
| WAVELINE | 7501-NF | 95 | WR75 x N(f) Adapter | 4 |
| WAVELINE | 7506-03 | 85 | WR75 3 dB Fixed Attenuator | 3 |
| WAVELINE | 7506-40 | 85 | WR75 40 dB Fixed Attenuator | 1 |
| WAVELINE | 7508-C | 250 | WR75 Variable Phase Shifter, 0-180 degrees, dial gage read, 0.5 dB maximum insertion loss | 5 |
| WAVELINE | 7510 | 145 | WR75 Level Set Attenuator, 0-40 dB, uncalibrated drive | 1 |
| WAVELINE | 7511 | 145 | WR75 Variable Attenuator, 0.5-30 dB, vernier drive | 1 |
| WAVELINE | 7511 | 150 | WR75 Variable Attenuator, 0-30 dB, counter dial read | 3 |
| WAVELINE | 7512-DR | 165 | WR75 Variable Attenuator, 0.5-40 dB, direct reading dial | 1 |
| WAVELINE | 7522 | 450 | WR75 Precision Direct Reading Attenuator, 0-60 dB | 6 |
| WAVELINE | 7522R | 450 | WR75 Precision Direct Reading Attenuator, 0-60 dB, rackmount version orients input/output arms parallel to panel mount | 1 |
| WAVELINE | 7532-2 | 50 | WR75 90 degree E-Plane Bend | 1 |
| WAVELINE | 7533 | 50 | WR75 90 degree H-Plane Bend, cover/choke flanges | 1 |
| WAVELINE | 7533-2 | 50 | WR75 90 degree H-Plane Bend | 1 |
| WAVELINE | 7554 | 145 | WR75 Low Power Termination, 2 Watts, 1.02 VSWR | 8 |
| WAVELINE | 7568 | 45 | WR75 Feedthru Bulkhead, 4 inches length, 3.5 inch diameter 6-hole mount | 1 |
| WAVELINE | 7569-20 | 125 | WR75 4-Port Crossguide Coupler, 20 dB coupling | 3 |
| WAVELINE | 757 | 85 | WR62 Hybrid Tee, silver/brass, 3.23 inches length, choke flanges | 1 |
| WAVELINE | 7573-10 | 350 | WR75 Ultra-Flat Directional Coupler, 10 dB coupling | 21 |
| WAVELINE | 7574-10 | 295 | WR75 Directional Coupler, 10 dB coupling | 23 |
| WAVELINE | 7574-20 | 295 | WR75 Directional Coupler, 20 dB coupling | 1 |
| WAVELINE | 7578-E | 150 | WR75 4-Port Manual Transfer Switch, E-Plane switching | 1 |
| WAVELINE | 7582 | 325 | WR75 High Power Load, 500 Watts average/ 230 kW peak | 2 |
| WAVELINE | 7585 | 85 | WR75 H-Plane (Shunt) Tee | 1 |
| WAVELINE | 7596 | 20 | WR75 Flush Short | 1 |
| WAVELINE | 90893 | 375 | WR75 Dual Directional Coupler, 30 dB fwd arm/ 10 dB refl arm,19" | 1 |
| WAVELINE | 90959-3 | 295 | WR75 Directional Coupler, 3 dB coupling, directivity 40 dB | 4 |
| WAVELINE | 92100 | 250 | WR75 Variable Attenuator, 0-60 dB, dial attenuation indicator in 10 dB increments, lockable, 7.5 inches length | 1 |
| WESTERN ELECTRIC | 101-295-05 | 85 | WR75 Matched Hybrid Tee, silver/brass, 3 inches length | 1 |
| WESTERN ELECTRIC | C13600 | 95 | WR75 x SMA(f) Adapter | 1 |
| WESTERN ELECTRIC | WR75 E 90 long legs | 45 | WR75 90 degree mitre E-Plane Bend, 6.10 x 7.25 inch leg lengths, brass | 2 |
